TITLE

Dielectric response of high permittivity polymer ceramic composite with low loss tangent

AUTHOR(S)
Subodh, G.; Deepu, V.; Mohanan, P.; Sebastian, M. T.
PUB. DATE
August 2009
SOURCE
Applied Physics Letters;8/10/2009, Vol. 95 Issue 6, p062903
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The present communication investigates the dielectric response of the Sr9Ce2Ti12O36 ceramics loaded high density polyethylene and epoxy resin. Sr9Ce2Ti12O36 ceramic filled polyethylene and epoxy composites were prepared using hot blending and mechanical mixing, respectively. 40 vol % ceramic loaded polyethylene has relative permittivity of 12.1 and loss tangent of 0.004 at 8 GHz, whereas the corresponding composite using epoxy as matrix has permittivity and loss tangent of 14.1 and 0.022, respectively. The effective medium theory fits relatively well for the observed permittivity of these composites.
ACCESSION #
43720450

 

Related Articles

  • The VCI-P code: an iterative variation–perturbation scheme for efficient computations of anharmonic vibrational levels and IR intensities of polyatomic molecules. Carbonnière, Philippe; Dargelos, Alain; Pouchan, Claude // Theoretical Chemistry Accounts: Theory, Computation, & Modeling;Mar2010, Vol. 125 Issue 3-6, p543 

    A variation–perturbation scheme called VCI-P code is proposed. It is developed mainly for the efficient and accurate theoretical description of vibrational resonances in polyatomic molecules. This state-specific process consists of the iterative construction of small matrices for each...

  • Synthesis of heterobimetallic lanthanidetert-butoxides and their catalytic properties in reactions of CO2 with epoxides. Nikitinskii, A. V.; Bochkarev, L. N.; Khorshev, S. Ya.; Bochkarev, M. N. // Russian Journal of General Chemistry;Aug2004, Vol. 74 Issue 8, p1197 

    Heterobimetallic tert-butoxides (t-BuO)5Cu2Ln (Ln = Y, La, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb), (t-BuO)5MLa (M = Mn, Fe, Co, Ni), (t-BuO)5ZnNd, and (t-BuO)4ZnFe were prepared in high yields by the reaction oft-BuOLi with a stoichiometric mixture of a lanthanide halide LnX3 (Ln = Y, La, Nd,...

  • Reactivity of Cyclocarbonate Groups in Modified Epoxy—Amine Compositions. Garipov, R. M.; Sysoev, V. A.; Mikheev, V. V.; Zagidullin, A. I.; Deberdeev, R. Ya.; Irzhak, V. I.; Berlin, Al. Al. // Doklady Physical Chemistry;Nov2003, Vol. 393 Issue 1-3, p289 

    Examines the kinetic features of the interaction of cyclocarbonate modifying groups of epoxy compositions with amino groups. Interaction of the alkylene carbonates of the types I , II , XII , and XIII with aliphatic amines; Reaction products includes a urethane group and, in the b position to...

  • Effect of nonstoichiometry on the structure and microwave dielectric properties of cobalt metaniobate. Belous, A.; Ovchar, O.; Kramarenko, A.; Mishchuk, D.; Jancar, Bostjan; Bezjak, Jana; Suvorov, Danilo // Inorganic Materials;Dec2006, Vol. 42 Issue 12, p1369 

    The formation of cobalt metaniobate, CoNb2O6, with the columbite structure has been studied, and possible ways of optimizing solid-state synthesis conditions have been examined. Single-phase CoNb2− y O6−2.5 y has been obtained in the composition range 0 ≤ y ≤ 0.05. The...

  • High dielectric permittivity in semiconducting Pr0.6Ca0.4MnO3 filled polyvinylidene fluoride nanocomposites with low percolation threshold. Devi Chandrasekhar, K.; Venimadhav, A.; Das, A. K. // Applied Physics Letters;8/10/2009, Vol. 95 Issue 6, p062904 

    Semiconducting Pr0.6Ca0.4MnO3 nanoparticles with width of ∼50 nm and length ∼80–150 nm were prepared by sol-gel method. The dielectric behavior of Pr0.6Ca0.4MnO3, polyvinylidene fluoride composites was investigated by varying the Pr0.6Ca0.4MnO3 volume fraction and frequency. The...

  • Composite enhances robot sub's abilities.  // Design News;3/25/91, Vol. 47 Issue 6, p55 

    Reports that the United States Navy is building hulls and frames of the composite material polyethylene-fiber-reinforced epoxy for its robot submarines. Nearly neutral buoyancy allows for smaller ballast tanks and greater payloads; Strength, stiffness, and abrasion resistance; Extended-chain...

  • Influence of porosity in the epoxy matrix-polyvinyl alcohol-disperse filler system on the impact toughness. Stukhlyak, P.; Moroz, K. // Materials Science;Jan2011, Vol. 46 Issue 3, p455 

    We investigate formation of pores in the process of formation of the epoxy matrix-polyvinyl alcohol-disperse filler system and their influence on the impact toughness. The optimal ratio of the components for the preparation of a material with given properties is determined.

  • Ultra-Thin, Loaded Epoxy Materials for Use as EMBEDDED CAPACITOR Layers. Peiffer, Joel S. // Printed Circuit Design & Manufacture;Apr2004, Vol. 21 Issue 4, p40 

    Discusses the use of ultra-thin, loaded epoxy materials as embedded capacitor layers. Fabrication of printed circuit boards with a number of embedded capacitor materials to test bard processing compatibility, reliability and electrical performance; Advantages of loaded, ultra-thin dielectric...

  • Nucleation kinetics of folded chain crystals of polyethylene on active centers. Kozísek, Zdenêk; Hikosaka, Masamichi; Demo, Pavel; Sveshnikov, Alexei M. // Journal of Chemical Physics;7/15/2004, Vol. 121 Issue 3, p1587 

    Kinetic equations describing formation of nuclei of a new phase on active centers from supercooled melt taking into account exhaustion of active centers are solved numerically. Basic characteristics of nucleation process (total number of nuclei and nucleation rate) of folded chain crystals of...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics