Investigations on AuSi liquid alloy sources (abstract)

Muhle, R.; Germann, D.; Nebiker, P.
March 1996
Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1374
Academic Journal
Discusses an abstract focusing on the extensive investigations on AuSi liquid alloy ion sources of different alloy compositions. Influence of source temperature and tip radius on current-voltage characteristics, emission current stability, and angular distribution; Mass spectra measurement as a function of source current, source temperature and source operating time.


Related Articles

  • An apparatus to grain refine metals and alloys with mold vibrations. Maltais, Alexandre; Fiset, Michel; Dubé, Dominique // Review of Scientific Instruments;Oct2005, Vol. 76 Issue 10, p105105 

    An apparatus has been built to study the grain refining effect of mechanical vibrations applied during the solidification of magnesium alloys. The experimental setup consists of a pneumatic vibrator attached to a vertical beam onto which a permanent mold is clamped. This mold experiences peak...

  • Spatial structure of electric potential near the extraction region in Cs-seeded H- ion sources. Fukano, A.; Hanatani, J.; Matsumiya, T.; Hatayama, A. // Review of Scientific Instruments;Feb2008, Vol. 79 Issue 2, p02A525 

    Structure of electric potential near the extraction region in a negative ion source is investigated analytically with the effect of strong surface H- production. The potential profile is analyzed one dimensional by solving the plasma-sheath equation, which gives the electric potential in the...

  • Volume source of hydrogen negative ions based on rfelexive discharge: Theory and experiment[sup a)]. Goretsky, V.P.; Ryabtsev, A.V.; Soloshenko, I.A.; Tarasenko, A.F.; Schedrin, A.I. // Review of Scientific Instruments;Apr96, Vol. 67 Issue 4, p1622 

    Reports on the results of theoretical and experimental studies of the stationary volume source of hydrogen negative ions based on reflexive discharge. Measurements of plasma parameters; Parameters of the ion beam; Calculation of dependencies of hydrogen negative ions' current density.

  • Ion source metal-arc fault current protection circuit. deVries, G. J.; Lietzke, A. F.; van Os, C. F. A.; Stearns, J. W. // Review of Scientific Instruments;Dec1991, Vol. 62 Issue 12, p3098 

    Ion sources can be damaged by arcs between metallic components of the source if these arcs are permitted to last. The negative-biased low-work-function converter in a surface conversion negative ion source is especially susceptible to metal-arc breakdown damage. Here an electronic circuit for...

  • Plasma cathode oxygen-ion source. Shibuya, Takehisa // Review of Scientific Instruments;Dec1991, Vol. 62 Issue 12, p2890 

    A plasma cathode ion source has been developed to attain a long lifetime in oxygen-ion production. In this ion source, a plasma of a nonreactive gas serves as a cathode in place of a thermionic tungsten hot cathode used in the conventional Kaufman ion source. An anode ring with an annular slit...

  • Development of liquid-metal-ion source low-energy ion gun/high-temperature ultrahigh vacuum scanning tunneling microscope combined system. Uchigasaki, M.; Kamioka, T.; Hirata, T.; Shimizu, T.; Lin, F.; Shinada, T.; Ohdomari, I. // Review of Scientific Instruments;Dec2005, Vol. 76 Issue 12, p126109 

    A liquid-metal-ion source low-energy ion gun/high-temperature ultrahigh vacuum scanning tunneling microscope combined system (LMIS-IG/STM) has been developed in order to investigate the ion beam modification process in situ based on our previous ion gun/STM combined system (IG/STM). Various...

  • NEW INSTRUMENTS.  // Review of Scientific Instruments;Dec1997, Vol. 68 Issue 12, p4629 

    Presents scientific instruments. Ion sputtering source; Pyrometer; Sensors.

  • Ion beam assisted deposition with a duoplasmatrona). Ensinger, W.; Barth, M.; Martin, H.; Schröer, A.; Enders, B.; Emmerich, R.; Wolf, G. K. // Review of Scientific Instruments;May92, Vol. 63 Issue 5, p3058 

    One of the recent applications of ion sources is their use for ion beam assisted deposition of thin films and coatings. This method combines a coating technique such as evaporation or sputtering with bombardment with ions in the keV energy range. The required ions with defined energy, flux, and...

  • Operation of a Dudnikov type Penning source with LaB6 cathodes. Leung, K. N.; DeVries, G. J.; Ehlers, K. W.; Jackson, L. T.; Stearns, J. W.; Williams, M. D.; McHarg, M. G.; Ball, D. P.; Lewis, W. T.; Allison, P. W. // Review of Scientific Instruments;Feb1987, Vol. 58 Issue 2, p235 

    The Dudnikov type Penning source has been operated successfully with low work function LaB6 cathodes in a cesium-free discharge. It is found that the extracted H- current density is comparable to that of the cesium-mode operation and H- current density of 350 mA/cm2 have been obtained for an arc...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics