Beam emittance measurements on multicusp ion sources

Sarstedt, M.; Lee, Y.; Leung, K.N.; Perkins, L.T.; Pickard, D.S.; Weber, M.; Williams, M.D.
March 1996
Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1249
Academic Journal
Measures the emittance of an ion beam generated on multicusp ion sources. Numerical calculation of the extraction system; Chance of distortion emittance due to the coupling of the radio frequency voltage to the direct current extraction voltage; Beam emittance with and without magnetic filters.


Related Articles

  • Spectroscopic studies in the VUV range in electron cyclotron resonance ion sources. Jettkant, B.; Berreby, R.; Hitz, D.; Druetta, M. // Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1258 

    Studies emission lines in the VUV range in electron cyclotron resonance ion sources, CAPRICE and QUADRUMAFIOS. Observation of emission lines from nearly all ionization states; Comparison of ion densities between CAPRICE and QUADRUMAFIOS.

  • An ESS system for ECRIS Emittance Research. Cao, Y.; Sun, L. T.; He, W.; Ma, L.; Zhang, Z. M.; Zhao, H. Y.; Zhao, H. W.; Zhang, X. Z.; Guo, X. H.; Ma, B. H.; Li, J.; Wang, H.; Li, J. Y.; Li, X. X.; Feng, Y. C.; Lu, W. // AIP Conference Proceedings;2005, Vol. 749 Issue 1, p231 

    An emittance scanner named Electric-Sweep Scanner had been designed and fabricated in IMP. And it has been set up on the LECR3 beam line for the ion beam quality study. With some development, the ESS system has become a relatively dependable and reliable emittance scanner. Its experiment error...

  • Emittance measurement at IMP LECR3. Cao, Y.; Zhao, H. W.; Ma, L.; Zhang, Z. M.; Sun, L. T. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1443 

    We have designed and built an emittance scanner which was installed at the beam line of IMP LECR3. The scanner measures the emittance of ECR ion source by the method of electric-sweep, typically named as Electric-Sweep Scanner (ESS). The horizontal and vertical emittances were both measured by...

  • Ion beam assisted deposition with a duoplasmatrona). Ensinger, W.; Barth, M.; Martin, H.; Schröer, A.; Enders, B.; Emmerich, R.; Wolf, G. K. // Review of Scientific Instruments;May92, Vol. 63 Issue 5, p3058 

    One of the recent applications of ion sources is their use for ion beam assisted deposition of thin films and coatings. This method combines a coating technique such as evaporation or sputtering with bombardment with ions in the keV energy range. The required ions with defined energy, flux, and...

  • Theoretical and Experimental Studies of the Extracted MCI Beam from an ECR Ion Source. Sun, L. T.; Cao, Y.; Zhao, H. W.; Guo, X. H.; Zhang, Z. M.; Feng, Y. C.; Li, J. Y.; Ma, L.; Li, J.; Zhao, H. Y.; He, W.; Li, X. X.; Hitz, D.; Girard, A. // AIP Conference Proceedings;2005, Vol. 749 Issue 1, p227 

    With the development of Electron Cyclotron Resonance Ion Source (ECRIS), very high performance ECRIS nowadays have been set up one by one around the world, such as the GTS in Grenoble, SERSE in Catania, LECR3 in Lanzhou and etc, which can produce very intense Multiply Charged Ion (MCI) beam. But...

  • 2Q-LEBT Prototype for the RIA Facility. Vinogradov, N. E.; Aseev, V. N.; Kern, M. R. L.; Ostroumov, P. N.; Pardo, R. C.; Scott, R.; Vondrasek, R. C. // AIP Conference Proceedings;2005, Vol. 749 Issue 1, p215 

    The Rare Isotope Accelerator (RIA) facility utilizes the concept of simultaneous acceleration of two charge states from the ion source. We are building a prototype two charge-state (2Q) injector of the RIA Driver Linac, which includes an ECR ion source, a LEBT and one-segment of the prototype...

  • Emittance characterization of a hot-cavity laser ion source at Holifield Radioactive Ion Beam Facility. Liu, Y.; Baktash, C.; Beene, J. R.; Geppert, Ch.; Gottwald, T.; Havener, C. C.; Kessler, T.; Krause, H. F.; Schultz, D. R.; Stracener, D. W.; Vane, C. R.; Wies, K.; Wendt, K. // Review of Scientific Instruments;Aug2009, Vol. 80 Issue 8, p083304 

    The first investigation of the transverse emittance of a hot-cavity laser ion source based on all-solid-state Ti:sapphire lasers is presented. The emittances of 63Cu ion beams generated by three-photon resonant ionization are measured and compared with that of the 69Ga and 39K ion beams...

  • Production of high intensity primary beams at GANIL. Barué, C.; Canet, C.; Cornell, J.; Dubois, M.; Dupuis, M.; Eléon, C.; Flambard, J. L.; Gaubert, G.; Huet-Equilbec, C.; Jardin, P.; Lecesne, N.; Lehérissier, P.; Lemagnen, F.; Leroy, R.; Pacquet, J. Y. // Review of Scientific Instruments;Mar2006, Vol. 77 Issue 3, p03A344 

    The 100 kV platform used for the production of primary beams has been modified in order to increase the beam intensity. The configuration of the new platform is described and preliminary results are reported. A gain intensity of a factor of 2 has already been obtained for sulfur: 36S (65%...

  • Electrostatic plasma lens for accelerator injection application. Chekh, Yu. M.; Goncharov, A. A.; Protsenko, I. M.; Dobrovolsky, A. M.; Brown, I. G. // Review of Scientific Instruments;Mar2006, Vol. 77 Issue 3, p03B906 

    We describe the results of investigations of the suitability of the electrostatic plasma lens as a focusing element in the low-energy injection beam lines of particle accelerators. We have explored the focusing of high-current, wide-aperture, heavy-ion beams by a plasma lens. The results...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics