TITLE

A combined thermal dissociation and electron impact ionization source for radioactive ion beam

AUTHOR(S)
Alton, G.D.; Williams, C.
PUB. DATE
March 1996
SOURCE
Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1189
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Discusses the abstract for a combined thermal dissociation and electron impact ionization source for radioactive beam generation. Effect of fragmentation process on ion beam intensity; Potential use for radioactive beam applications where beam intensity is at a premium.
ACCESSION #
4367249

 

Related Articles

  • A high-efficiency positive (negative) surface ionization source for radioactive ion beam (abstract). Alton, G.D.; Mills, G.D. // Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1189 

    Discusses the abstract for the development of a design and fabrication of a positive (negative) surface-ionization source for generating both positive- and negative-ion beams without mechanical changes to the source. Potential to overcome chronic poisoning effects experienced with LaB[sub 6].

  • Status report on the electron cyclotron resonance ion sources used for the production of... Gaelens, M.; Decrock, P.; Huyse, M.; Van Duppen, P.; Loiselet, M.; Ryckewaert, G. // Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1347 

    Reports on the production of radioactive ion beams using electron cyclotron resonance (ECR) ion sources at Louvain-la-Neuve, Belgium. Coupling of the ECR source to the Leuven isotope separator on-line mass separator; Upgrading of the ECR source for higher charge states.

  • Selection of targets and ion sources for radioactive ion beam generation at the Holifield... Alton, G.D. // Review of Scientific Instruments;Nov96, Vol. 67 Issue 11, p3831 

    Describes the performance characteristics for a selected number of target ion sources that will be employed for initial use at the Holifield Radioactive Ion Beam Facility. Prototype ion sources that show promise for future use for radioactive ion beam applications; Present efforts to select...

  • Bunching and cooling of radioactive ions with REXTRAP. Ames, F.; Beck, D.; Bollen, G.; Forstner, O.; Habs, D.; Huber, G.; Reisinger, K.; Schmidt, P. // AIP Conference Proceedings;2002, Vol. 606 Issue 1, p609 

    The properties of radioactive ion beams produced by the present on-line target ion source technology are often not suitable for direct post acceleration. For that purpose pulsed and cooled beams of higher charged ions are required. In the case of REX-ISOLDE, the post accelerator at the...

  • Radioactive ion beams at the HRIBF. Stracener for the HRIBF Staff, D. W. // AIP Conference Proceedings;2001, Vol. 576 Issue 1, p257 

    The Holifield Radioactive Ion Beam Facility (HRIBF) is now delivering beams of radioactive ions for nuclear physics experiments. The radioactive ions are produced using the Isotope-Separator-On-Line (ISOL) technique and then injected into a 25 MV tandem electrostatic accelerator and accelerated...

  • A beam line for highly charged ions. Pikin, A.I.; Morgan, C.A.; Bell, E.W.; Ratliff, L.P.; Church, D.A.; Gillaspy, J.D. // Review of Scientific Instruments;Jul96, Vol. 67 Issue 7, p2528 

    Describes the design and operation of a beam line for transporting and charge-to-mass selecting highly charged ions extracted from the National Institute of Standards and Technology electron beam ion trap (EBIT). Production of pure beams of low-energy, highly charged ions; Design choices and...

  • Focused ion-beam direct deposition of metal thin film. Nagamachi, Shinji; Yamakage, Yasuhiro; Ueda, Masahiro; Maruno, Hiromasa; Ishikawa, Junzo // Review of Scientific Instruments;Jun96, Vol. 67 Issue 6, p2351 

    Reports on the development of focused ion-beam direct deposition as a method for fabricating patterned metal films directly on substrates. Performance of ion-beam deposition by low-energy focused ion beams; Estimated beam diameter; Measurement of the purity of the gold film using Auger electron...

  • An apparatus for glancing incidence ion beam polishing and characterization of surfaces to... Wissing, M.; Holzwarth, M.; Simeonova, D.S.; Snowdon, K.J. // Review of Scientific Instruments;Dec1996, Vol. 67 Issue 12, p4314 

    Describes an instrument which combines a glancing incidence ion beam erosion system with a scanning tunneling and an atomic force microscope. Allowing the ion beam polishing and surface topographic characterization of samples under ultrahigh vacuum conditions; Vacuum system and vibration...

  • Prototype negative-ion sources for radioactive ion-beam generation. Alton, G.D.; Welton, R.F.; Williams, C.; Cui, B.; Murray, S.N. // Review of Scientific Instruments;Jun98, Vol. 69 Issue 6, p2313 

    Investigates hot carbon nitrogen oxygen cycles and rp stellar nuclear synthesis processes based on radioactive ion beams of [sup 17]F and [sup 18]F. Process of generating useful beam intensities of atomic F[sup -]; Evaluation of prototype negative ion sources; Presentation of mechanical design...

Share

Read the Article

Courtesy of NEW JERSEY STATE LIBRARY

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics