TITLE

Ion sources for heavy ion fusion (invited)

AUTHOR(S)
Yu, Simon S.; Eylon, S.; Chupp, W.; Henestroza, E.; Lidia, S.; Peters, C.; Reginato, L.; Tauschwitz, A.; Grote, D.; Deadrick, F.
PUB. DATE
March 1996
SOURCE
Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1098
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Reports on the development ion sources for heavy ion fusion. Fabrication of large thermonic ion emitters; Beam extraction using a 2 MeV injector; Design of the beam optics; Range of voltages and currents produced by the injector; Energy flatness of the ion beam.
ACCESSION #
4367223

 

Related Articles

  • Time-resolved emittance of a bismuth ion beam from a pulsed vacuum arc ion source. Anders, André; Chacon-Golcher, Edwin // Journal of Applied Physics;2/15/2003, Vol. 93 Issue 4, p2298 

    The emittance of a pulsed bismuth vacuum arc ion source has been measured using a time-resolving double-slit emittance scanner. Each arc pulse was 250 µs long. Ion extraction was performed with 20 µs pulses 200 µs after arc triggering, when Bi ions are almost exclusively singly charged....

  • Developing high brightness beams for heavy ion driven inertial fusion. Kwan, J. W.; Anders, A.; Bieniosek, F. M.; Chacon-Golcher, E.; Henestroza, E.; Leung, K. N.; Ahle, L. A.; Grote, D. P.; Molvik, A. W. // Review of Scientific Instruments;Feb2002, Vol. 73 Issue 2, p1084 

    Heavy ion fusion (HIF) drivers require large currents and bright beams. In this article we review the two different approaches for building HIF injectors and the corresponding ion source requirements. The traditional approach uses large aperture, low current density ion sources, resulting in a...

  • Ion sources for induction linac driven heavy ion fusiona). Rutkowski, H. L.; Eylon, S.; Chupp, W. W. // Review of Scientific Instruments;May94, Vol. 65 Issue 5, p1728 

    The use of ion sources in induction linacs for heavy ion fusion is fundamentally different from their use in the rf linac-storage rings approach. Induction linacs require very high current, short pulse extraction usually with large apertures which are dictated by the injector design. One is...

  • Vacuum arc ion source for heavy ion fusion. Liu, F.; Prasad, R. R.; Brown, I. G.; Krishnan, M.; Qi, N.; Gensler, S. // Review of Scientific Instruments;Feb1998, Vol. 69 Issue 2, p819 

    Investigates the use of vacuum arc ion source for heavy ion fusion. Production of gadolinium ion beams; Concern on space-charge neutralization; Need for a background pressure in providing beam space-charge neutralization.

  • Development of a Bi[sup +] source for heavy ion fusion. Weber, M.; Lakatos, A.; Maaser, A.; Klein, H.; Beller, P.; Volk, K. // Review of Scientific Instruments;Feb1998, Vol. 69 Issue 2, p1066 

    Investigates the development of a bismuth source for heavy ion fusion. Construction of a multiaperture extraction system; Use of a high power emittance scanner in determining beam emittance; Relationship between plasma parameters and beam composition.

  • Negative chlorine ions from multicusp radio frequency ion source for heavy ion fusion applications. Hahto, S. K.; Hahto, S. T.; Kwan, J. W.; Leung, K. N.; Grisham, L. R. // Review of Scientific Instruments;Jun2003, Vol. 74 Issue 6, p2987 

    Use of high mass atomic neutral beams produced from negative ions as drivers for inertial confinement fusion has been suggested recently. Best candidates for the negative ions would be bromine and iodine with sufficiently high mass and electron affinity. These materials require a heated vapor...

  • Spiral wobbling beam illumination uniformity in HIF fuel target implosion. S. Kawata; T. Kurosaki; S. Koseki; Y. Hisatomi; D. Barada; Y. Y. Ma; A. I. Ogoyski // EPJ Web of Conferences;2013, Issue 59, p1 

    A few % wobbling-beam illumination nonuniformity is realized in heavy ion inertial confinement fusion (HIF) throughout the heavy ion beam (HIB) driver pulse by a newly introduced spiraling beam axis motion in the first two rotations. The wobbling HIB illumination was proposed to realize a...

  • Secondary ions produced by 400 eV He[sup +] ion impact on N[sub 2] and O[sub 2] thin films at 8 K. Hiraoka, K.; Sato, T.; Watanabe, M.; Mori, K.; Kimura, M. // Journal of Chemical Physics;10/1/2002, Vol. 117 Issue 13, p6252 

    Secondary ions produced by 400 eV He[sup +] ion impact on N[sub 2] and O[sub 2] thin films deposited on a silicon substrate at 8 K were measured as a function of film thickness using a time-of-flight secondary-ion mass spectrometer. While the N[sup +, sub n] ions with n up to 4 were observed for...

  • Mechanism of secondary ion emission from an Al sample under MeV heavy ion bombardment. Xue, J.; Ninomiya, S.; Gomi, S.; Imanishi, N. // AIP Conference Proceedings;2001, Vol. 576 Issue 1, p145 

    Sputtering yields and kinetic energy distributions (KED) of Al atomic ions ejected from a pure aluminum sample under MeV silicon ion bombardment were simulated with the molecular dynamics (MD) method. Since the electronic energy loss (S[sub e]) is much higher than the nuclear energy loss (S[sub...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics