TITLE

Review of work related to ion sources and targets for radioactive beams at Argonne

AUTHOR(S)
Nolen, J.A.
PUB. DATE
March 1996
SOURCE
Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p935
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
of finite-difference time-domain technique to model the microwave fields with excite the plasma; Determination of the distribution function for the electron energy change; Radioactive beam production target geometries; Charge-state/stripping options; Tests of isol-type ion sources.
ACCESSION #
4367166

 

Related Articles

  • Selection of targets and ion sources for radioactive ion beam generation at the Holifield... Alton, G.D. // Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p934 

    Describes the performance characteristics for a selected number of target ion sources that will be employed for initial use at the Holifield Radioactive Ion Beam Facility in Tennessee. Efforts to select target materials; Development of a design for composite target matrix/heat-sink systems.

  • Status report on the electron cyclotron resonance ion sources used for the production of... Gaelens, M.; Decrock, P.; Huyse, M.; Van Duppen, P.; Loiselet, M.; Ryckewaert, G. // Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1347 

    Reports on the production of radioactive ion beams using electron cyclotron resonance (ECR) ion sources at Louvain-la-Neuve, Belgium. Coupling of the ECR source to the Leuven isotope separator on-line mass separator; Upgrading of the ECR source for higher charge states.

  • The use of magnetic fields in a partial-coaxial microwave cavity holey-plate ion source. Yoshida, Y.; Takeiri, Y. // Review of Scientific Instruments;Jan2000, Vol. 71 Issue 1 

    A low-pressure and high-density microwave ion source created and sustained by evanescent waves emitted from a holey plate, and using permanent magnet multicusp fields, has been studied. This source is called a holey-plate ion source. Microwave power at 2.45 GHz is supplied from a coaxial cavity...

  • Simple and direct method to determine the single or polydomain status of the particles in a uniaxial ferromagnetic polycrystal: Measure of the coercive and anisotropy fields. Turilli, G.; Pareti, L.; Paoluzi, A. // Review of Scientific Instruments;Jul1988, Vol. 59 Issue 7, p1215 

    We present a method and the corresponding apparatus which allow one to determine the single or polydomain status of the particles in a uniaxial ferromagnetic polycrystal. The method is based on the measurement of the field dependence of the transverse susceptibility χ[sub t] (H). The...

  • Ion source metal-arc fault current protection circuit. deVries, G. J.; Lietzke, A. F.; van Os, C. F. A.; Stearns, J. W. // Review of Scientific Instruments;Dec1991, Vol. 62 Issue 12, p3098 

    Ion sources can be damaged by arcs between metallic components of the source if these arcs are permitted to last. The negative-biased low-work-function converter in a surface conversion negative ion source is especially susceptible to metal-arc breakdown damage. Here an electronic circuit for...

  • Plasma cathode oxygen-ion source. Shibuya, Takehisa // Review of Scientific Instruments;Dec1991, Vol. 62 Issue 12, p2890 

    A plasma cathode ion source has been developed to attain a long lifetime in oxygen-ion production. In this ion source, a plasma of a nonreactive gas serves as a cathode in place of a thermionic tungsten hot cathode used in the conventional Kaufman ion source. An anode ring with an annular slit...

  • Volume source of hydrogen negative ions based on rfelexive discharge: Theory and experiment[sup a)]. Goretsky, V.P.; Ryabtsev, A.V.; Soloshenko, I.A.; Tarasenko, A.F.; Schedrin, A.I. // Review of Scientific Instruments;Apr96, Vol. 67 Issue 4, p1622 

    Reports on the results of theoretical and experimental studies of the stationary volume source of hydrogen negative ions based on reflexive discharge. Measurements of plasma parameters; Parameters of the ion beam; Calculation of dependencies of hydrogen negative ions' current density.

  • Selection and design of ion sources for use at the Holifield radioactive ion beam facilitya). Alton, G. D.; Haynes, D. L.; Mills, G. D.; Olsen, D. K. // Review of Scientific Instruments;Jun94, Vol. 65 Issue 6, p2012 

    The Holifield Radioactive Ion Beam Facility now under construction at the Oak Ridge National Laboratory will use the 25 MV tandem accelerator for the acceleration of radioactive ion beams to energies appropriate for research in nuclear physics; negative ion beams are, therefore, required for...

  • Prototype negative ion sources for radioactive ion beam generation (abstract). Alton, G. D.; Williams, C.; Murray, S. N.; Cui, B.; Walton, R. F. // Review of Scientific Instruments;Feb1998, Vol. 69 Issue 2, p775 

    Investigates the prototype negative ion sources for radioactive ion beam generation. Overview of two prototype negative ion sources; Utilization of cesium vapor to enhance F[sup -] formation; Data on the analogous efficiencies and delay times for the kinetic ejection negative ion source.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics