TITLE

Laser ion source via direct ionization at the outlet of a helium jet

AUTHOR(S)
Shang Rencheng; Xu Sida; Zhang Wei; Yi Rong; Zhang Shuming; Zipiao, Ye; Zhao Zhizheng; Luo Yixiao
PUB. DATE
August 1997
SOURCE
Review of Scientific Instruments;Aug1997, Vol. 68 Issue 8, p3027
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Proposes a laser ion source based on laser resonant ionization at the outlet of a helium jet for on-line isotope separator of the Heavy Ion Research Facility in Lanzhou, China. Description of in-beam ionization; Classification of the proposal in three categories; Sodium atoms introduced into vacuum at reduced water density.
ACCESSION #
4358594

 

Related Articles

  • Small anode source for efficient ion production. Dudnikov, V.; Dudnikova, G. // Review of Scientific Instruments;Feb2002, Vol. 73 Issue 2, p726 

    Ion source modification is proposed for efficient production of ion beam and extending of operating lifetime. Ionization efficiency of the Bernas type ion source has been improved by using a small anode-thin rod, oriented along the magnetic field. The transverse electric field of small anode...

  • Effusive-flow characterization of arbitrary size and geometry target/vapor transport systems: RIB applications. Bilheux, J.-C.; Alton, G. D.; Liu, Y.; Murray, S. N.; Williams, C. L. // Review of Scientific Instruments;Feb2002, Vol. 73 Issue 2, p786 

    The principal factors that limit intensities of short-lived radioactive ion beams produced by the isotope separator on-line technique are time delays due to diffusion of radioactive species from solid or liquid target materials and their effusive-flow transport to the ion source. Although...

  • Technical considerations in the design of the Chalk River high temperature helium-jet ion source. Watson, M. J.; Koslowsky, V. T.; Hagberg, E.; Hardy, J. C.; Steer, M. G.; Schmeing, H.; Perry, W. L. // Review of Scientific Instruments;Apr92, Vol. 63 Issue 4, p2497 

    A second-generation helium-jet-coupled ion source of the Bernas-Nier type has been developed for the Chalk River on-line isotope separator. The source features improvements to the anode-cylinder heating system, which enables the anode to reach temperatures exceeding 2000 °C. The source...

  • The ECR ion source at the TRIUMF isotope separator TISOL. Buchmann, L.; Vincent, J.; D’Auria, J.; Dombsky, M.; McNeely, P.; Roy, G. // Review of Scientific Instruments;Apr92, Vol. 63 Issue 4, p2387 

    The installation at the isotope separator TISOL of a single-staged ECR (electron cyclotron resonance) ion source has been completed. The source can now routinely deliver radioactive species extracted from the production target when bombarded by 500 MeV protons. Among the radioactive species...

  • High efficiency ion sources for on-line mass separators: A brief review (invited). Duppen, P. Van; Decrock, P.; Huyse, M.; Kirchner, R. // Review of Scientific Instruments;Apr92, Vol. 63 Issue 4, p2381 

    A review on low-charge state high-efficiency ion sources used at on-line isotope separators (ISOL) is given. These sources for which the efficiency is optimized, can be distinguished from ion sources used at, e.g., accelerators where essentially the output current is optimized. Recent...

  • Further development of a gaseous ion source based on low-pressure hollow cathode glow. Vizir, A. V.; Yushkov, G. Yu.; Oks, E. M. // Review of Scientific Instruments;Feb2000, Vol. 71 Issue 2, p728 

    Describes limitations of a hollow cathode glow discharge system embodied in a gas ion source. Ion source configuration and operating conditions; Ratio between the anode surface area and the surface area of the cathode cavity of the main discharge; Optimization of the geometry of the discharge gap.

  • Development of Radioactive Ion Beam Purification by Selective Adsorption at the HRIBF. Jost, C.; Carter, H. K.; Goans, R. E.; Griffith, B. O.; Katakam, R.; Kratz, K.-L.; Reed, C. A.; Spejewski, E. H.; Stora, T.; Stracener, D. W. // AIP Conference Proceedings;3/15/2009, Vol. 1099 Issue 1, p750 

    In the past decades many techniques have been developed to reduce isobaric contaminations in ISOL (Isotope Separation On-Line) beams. Another promising method to achieve improved selectivity is employing surface effects in the transfer line between target container and ion source. Thus...

  • Thermal positive-ion source developed for molecular beam detection. Kawano, Hiroyuki; Matsui, Seiji; Serizawa, Naoshi // Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p1193 

    Reports on the development of a thermal positive-ion source for neutral beam detection. Filament diameter of the neutral beam; Schematic diagram; Maximum sensitivities of the electrometers connected to the cylinder and Faraday cup; Optimum range temperatures observed with various sample...

  • Ion source for tests of ion behavior in the Karlsruhe tritium neutrino experiment beam line. Lukic, S.; Bornschein, B.; Drexlin, G.; Glück, F.; Kazachenko, O.; Schöppner, M.; Weinheimer, Ch.; Zoll, M. C. R. // Review of Scientific Instruments;Jan2011, Vol. 82 Issue 1, p013303 

    An electron-impact ion source based on photoelectron emission was developed for ionization of gases at pressures below 10-4 mbar in an axial magnetic field in the order of 5 T. The ion source applies only dc fields, which makes it suitable for use in the presence of equipment sensitive to...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics