TITLE

Use of thermal barriers in conceptual studies of high-temperature, high-intensity targets for

AUTHOR(S)
Talbert, W.L.; Hodges, T.A.; Hsu, H.-H.; Fikani, M.M.
PUB. DATE
August 1997
SOURCE
Review of Scientific Instruments;Aug1997, Vol. 68 Issue 8, p3019
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Describes the use of thermal barriers in conceptual studies of high-temperature, high-intensity targets for producing radioactive ion beams. Basic principle of heat extraction generated internally by the production of beam interactions; Three classes of targets; Thermal barriers approaches appropriate to the combined temperature and heat removal constraints.
ACCESSION #
4358593

 

Related Articles

  • Experimental study on the feasibility of hot plasmas as stripping media for MeV heavy ions. Shibata, K.; Tsubuku, K.; Nishimoto, T.; Hasegawa, J.; Ogawa, M.; Oguri, Y.; Sakumi, A. // Journal of Applied Physics;4/15/2002, Vol. 91 Issue 8, p4833 

    The feasibility of using hot plasmas as strippers for low-energy ion beams has been investigated by measuring charge state distributions of 350 keV/u ions ([sup 12]C,[sup 16]O,[sup 19]F) after their passage through a laser-produced plasma target. The plasma target was produced by irradiating a...

  • Exploitation and development of particle beams at Culham Laboratory (invited). Green, T. S. // Review of Scientific Instruments;Jan1990, Vol. 61 Issue 1, p523 

    Particle beams have been developed at the Culham Laboratory for many years, mainly for application to the production of high-temperature plasmas. These developments included demonstration of fundamental plasma physics such as particle trapping, heating, and current drive coupled to continuous...

  • High Tc Y-Ba-Cu-O thin films by ion beam sputtering. Gao, J.; Zhang, Y. Z.; Zhao, B. R.; Out, P.; Yuan, C. W.; Li, L. // Applied Physics Letters;12/26/1988, Vol. 53 Issue 26, p2675 

    High quality Y-Ba-Cu-O thin films were successfully prepared by using ion beam sputtering. Zero resistance was reached at 90 K. The critical current density at 77 K was 4–5×104 A/cm2. The surface morphology of the films was observed by scanning electron microscopy.

  • Low-temperature epitaxial Ni silicidation: The role of hyperthermal species. Tsubouchi, Nobuteru; Horino, Yuji // Journal of Chemical Physics;6/1/2005, Vol. 122 Issue 21, p214704 

    We present the results of Ni silicidation on a Si(111) surface employing a mass-selected hyperthermal ion beam at 100 eV and discuss the reaction mechanism compared with the conventional Ni silicidation process. It is found that the Ni silicide formation using this technique is different from...

  • Epitaxial gadolinium nitride thin films. Gerlach, J. W.; Mennig, J.; Rauschenbach, B. // Applied Physics Letters;2/5/2007, Vol. 90 Issue 6, p061919 

    GdN thin films are deposited on MgO(100) by low-energy ion-beam-assisted molecular-beam epitaxy at elevated temperatures. Elemental analysis by secondary-ion mass spectrometry proves that a protective layer is imperative to avoid oxidation of the GdN films in air. In situ surface structural...

  • Nanostructuring of High-TC Superconductors into Micro-Sized Zones. Mezzetti, E.; Botta, D.; Chiodoni, A.; Gerbaldo, R.; Ghigo, G.; Gozzelino, L.; Laviano, F.; Minetti, B.; Rovelli, A.; Amato, A.; Cherubini, R. // AIP Conference Proceedings;2006, Vol. 824 Issue 1, p786 

    A special apparatus was designed in order to “write”, with nanometric resolution, microsize-confined nanostructures in oxide samples. The nanostructures are produced by high energy heavy ion irradiation that allows nanostructuring the sample over its full thickness. The properties of...

  • Dual Ion Assist Beam Deposition of Magnesium Oxide for Coated Conductors. Groves, J. R.; Arendt, P. N.; Holesinger, T. G.; Hammond, R. H.; Foltyn, S. R.; DePaula, R. F.; Stan, L.; Usov, I. O. // AIP Conference Proceedings;2006, Vol. 824 Issue 1, p735 

    Ion Beam Assisted Deposition (IBAD) of Magnesium Oxide (MgO) has been proven to be a viable route for producing template films used to deposit high quality YBCO coated conductors on flexible polycrystalline metal substrates. Here we will discuss improvements in this process using a dual ion...

  • Enhanced life ion source for germanium and carbon ion implantation. Hsieh, Tseh-Jen; Colvin, Neil; Kondratenko, Serguei // AIP Conference Proceedings;Nov2012, Vol. 1496 Issue 1, p372 

    Germanium and carbon ions represent a significant portion of total ion implantation steps in the process flow. Very often ion source materials that used to produce ions are chemically aggressive, especially at higher temperatures, and result in fast ion source performance degradation and a very...

  • Development of an ion beam alignment system for real-time scanning tunneling microscope observation of dopant-ion irradiation. Kamioka, Takefumi; Sato, Kou; Kazama, Yutaka; Watanabe, Takanobu; Ohdomari, Iwao // Review of Scientific Instruments;Jul2008, Vol. 79 Issue 7, p073707 

    An ion beam alignment system has been developed in order to realize real-time scanning tunneling microscope (STM) observation of “dopant-ion” irradiation that has been difficult due to the low emission intensity of the liquid-metal-ion-source (LMIS) containing dopant atoms. The...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics