TITLE

Capillary-based x-ray collector/collimator for diffraction applications

AUTHOR(S)
Kovantsev, V.E.; Pant, J.; Pantojas, V.; Nazaryan, N.; Hayes, T.M.; Persans, P.D.
PUB. DATE
June 1993
SOURCE
Applied Physics Letters;6/7/1993, Vol. 62 Issue 23, p2905
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the capillary-based x-ray collector/collimator for diffraction applications. Use of multiple reflections with hollow glass capillary tubes; Diffraction assessment of the device from a lithium fluoride flat crystal monochromator; Increase of x-ray flux.
ACCESSION #
4337995

 

Related Articles

  • Coherent addition of AlGaAs lasers using microlenses and diffractive coupling. Leger, James R.; Scott, Miles L.; Veldkamp, Wilfrid B. // Applied Physics Letters;5/23/1988, Vol. 52 Issue 21, p1771 

    A near single-lobed far-field pattern was obtained from coherent operation of a nonevanescently coupled AlGaAs laser diode array. A diffractive microlens array collimated the individual beams to approximate a plane wave, and diffractive coupling from an external cavity mirror provided mutual...

  • Formation of Multiple Longitudinal High-Absorption Kinks under the Action of Collimated Gaussian Light Beams. Vysloukh, A. V.; Trofimov, V. A. // Technical Physics Letters;Feb2000, Vol. 26 Issue 2, p119 

    The possibility of formation of several longitudinal kinks under the action of a collimated Gaussian light beam in a medium with absorptive cavityless optical bistability is demonstrated to be possible. The beam is essentially affected by diffraction. The domain formation is caused by the...

  • Ideal collimation, concentration, and imaging with curved diffractive optical elements. Bokor, Nándor; Davidson, Nir // Review of Scientific Instruments;Nov2005, Vol. 76 Issue 11, p111101 

    In this article the design, optimization and characterization of diffractive optical elements formed on a curved surface are reviewed. For such curved diffractive optical elements not only the phase function, but also the surface shape are free parameters that can be used for optimization,...

  • New long trace profiler based on phase plate diffraction for optical metrology of SSRF. Zeng, Danhua; Xiao, Tiqiao; Du, Guohao; Wen, Li; Luo, Hongxin; Xia, Shaojian; Xu, Hongjie // Review of Scientific Instruments;Sep2006, Vol. 77 Issue 9, p093305 

    A long trace profiler LTP-1200, with a novel f-θ system based on phase plate diffraction and a scanning range up to 1200 mm, has been developed at Shanghai Synchrotron Radiation Facility. The central dark line in the diffraction pattern generated by a π phase plate is taken as the...

  • Meandering collimated beam of surface acoustic waves on a trigonal crystal ball. Yanagisawa, Takayuki; Ohgi, Tsuneo; Akao, Shingo; Nakaso, Noritaka; Tsukahara, Yusuke; Ohara, Yoshikazu; Tsuji, Toshihiro; Yamanaka, Kazushi // Applied Physics Letters;3/21/2011, Vol. 98 Issue 12, p123508 

    To fully exploit high-quality piezoelectric crystals in acoustic wave devices, it is necessary to remove limitations not related to the crystal quality. Among them, the 'diffraction loss' is most serious. Previously, we have developed the ball surface acoustic wave (SAW) sensor using crystal...

  • A collimated focused ultrasound beam of high acoustic transmission and minimum diffraction achieved by using a lens with subwavelength structures. Zhou Lin; Xiasheng Guo; Juan Tu; Jianchun Cheng; Junru Wu; Pingtong Huang; Dong Zhang // Applied Physics Letters;9/14/2015, Vol. 107 Issue 11, p1 

    An acoustic focusing lens incorporated with periodically aligned subwavelength grooves corrugated on its spherical surface has been developed. It is demonstrated theoretically and experimentally that acoustic focusing achieved by using the lens can suppress the relative sidelobe amplitudes,...

  • Accurate fabrication of anamorphic microlenses and efficient collimation of tapered.... Liau, Z.L.; Walpole, J.N. // Applied Physics Letters;6/20/1994, Vol. 64 Issue 25, p3368 

    Details the fabrication of highly precise refractive anamorphic microlenses in gallium phosphide substrates by mass-transport smoothing of etched multiple-mesa structures. Collimation of astigmatic outputs from tapered unstable-resonator lasers; Obtainment of initial good efficiencies;...

  • Dosimetric Studies of a mMLC for Intensity Modulated Radiation Surgery for Irregular Lesions. Garcia-Garduno, Olivia Amanda; Rodriguez-Villafuerte, Mercedes; Larraga-Gutierrez, Jose Manuel; Celis-Lopez, Miguel Angel // AIP Conference Proceedings;2003, Vol. 682 Issue 1, p167 

    In this work we present the commissioning of a micro Multileaf Collimator (mMLC) of the Novalisâ„¢ Intensity Modulated Radiation Surgery (IMRS) system. This system can deliver conventional stereotactic radiosurgery, conformal arcs and beams, and IMRS. The last modalities are performed using...

  • Design of the neutron multicollimator for Frascati tokamak upgrade. Batistoni, P.; Esposito, B.; Martone, M.; Mantovani, S. // Review of Scientific Instruments;Oct95, Vol. 66 Issue 10, p4949 

    Presents the design for the neutron multicollimator for Frascati tokamak upgrade (FTU). Provision of the radial profile of neutron emission from D-D plasmas; Derivation of the ion temperature profile; Information on the position and shape of FTU circular plasmas; Detection system and...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics