TITLE

Direct observation of the defect structure of polycrystalline diamond by scanning electron

AUTHOR(S)
Harker, A.B.; DeNatale, J.F.; Flintoff, J.F.; Breen, J.J.
PUB. DATE
June 1993
SOURCE
Applied Physics Letters;6/14/1993, Vol. 62 Issue 24, p3105
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Demonstrates the defect structure of polycrystalline diamond films by scanning electron microscopy. Surface crystallography of diamond films; Characterization of film microstructures; Observation on the defects and grain boundaries.
ACCESSION #
4329741

 

Related Articles

  • Direct-current bias effect on the synthesis of (001) textured diamond films on silicon. Lee, J.S.; Liu, K.S. // Applied Physics Letters;9/11/1995, Vol. 67 Issue 11, p1555 

    Investigates the necessary conditions involved in the synthesis of textured diamond films on silicon. Utilization of chemical vapor deposition in the growth of diamond films; Impact of modified bias voltage on diamond film growth; Alteration of the texture characteristics; Use of scanning...

  • Direct hydrothermal electrochemical preparation of diamond-like carbon films on substrates. Tao, Ying; Yi, Danqin; Zhu, Baojun; Wang, Dini; Wang, Ziyao; He, Kuangchi // Journal of Materials Science;Feb2011, Vol. 46 Issue 4, p1136 

    The article presents a study on the use of hydrothermal electrochemical process in the creation of diamond-like carbon (DLC) films. The study assessed the morphology of the films with the use of both scanning electron microscopy (SEM) and energy dispersive spectroscopy. Results showed that the...

  • Synthesis of oriented textured diamond films on silicon via hot filament chemical vapor deposition. Qijin Chen; Jie Yang // Applied Physics Letters;9/25/1995, Vol. 67 Issue 13, p1853 

    Focuses on the orientation of diamond films on Si(001) or Si(111) wafers in a conventional hot filament chemical vapor deposition apparatus. Use of scanning electron microscopy and Raman spectroscopy in characterizing substrates; Application of negative bias nucleation method; Importance of...

  • KrF excimer laser-assisted combustion-flame deposition of diamond films. Han, Y. X.; Ling, H.; Lu, Y. F. // Journal of Applied Physics;12/15/2006, Vol. 100 Issue 12, p124911 

    Cobalt (Co) composition has detrimental effects on the deposition of diamond films on cemented tungsten carbide (WC-Co) substrates. It decreases adhesion of the deposited films to the substrates and causes a transformation of sp3-bonded diamond to sp2-bonded graphite. In this study, a KrF...

  • Deposition and Characterization of Diamond Thin Films by HF-CVD Method. Mishra, S. C.; Choudhary, R. K.; Mishra, P.; Abraham, G. J. // AIP Conference Proceedings;2015, Vol. 1665, p1 

    Effect of reactor pressure and methane gas concentration on the growth of diamond films on Si (100) substrate by hot filament chemical vapor deposition (HFCVD) method has been studied in this work. Raman spectroscopy measurements of the obtained film confirmed the formation of a mixture of micro...

  • Evidence of electrical activity of extended defects in 3C–SiC grown on Si. Song, X.; Michaud, J. F.; Cayrel, F.; Zielinski, M.; Portail, M.; Chassagne, T.; Collard, E.; Alquier, D. // Applied Physics Letters;4/5/2010, Vol. 96 Issue 14, p142104 

    In this paper, we demonstrate the high electrical activity of extended defects found in 3C–SiC heteroepitaxially grown layer on (100) silicon substrates. Cross-sectional scanning transmission electron microscopy analysis was performed to reveal the defects while scanning spreading...

  • Degradation evolution in high power IGBT modules subjected to sinusoidal current load. Pedersen, Kristian; Østergaard, Lotte; Kristensen, Peter; Ghimire, Pramod; Popok, Vladimir; Pedersen, Kjeld // Journal of Materials Science: Materials in Electronics;Feb2016, Vol. 27 Issue 2, p1938 

    In this paper the degradation evolution and distribution in high power IGBT module interconnects are investigated. Modules are subjected to advanced active thermal cycling by applying a sinusoidal current load switched by the device. A series of samples subjected to an increasing number of power...

  • Effect of welding current on microstructure and properties of TIG welded EW75 magnesium alloy. Chun-fang Lu; Yong-jun Li; Kui Zhang; Xing-gang Li; Ming-long Ma; Guo-liang Shi; Jiawei Yuan // Materials Science Forum;2016, Vol. 852, p142 

    Using the wire of the same material as base metal, EW75 magnesium alloy (Mg-7Gd-5Y-1Nd-0.5Zr wt. %) plate with the thickness of 6 mm was welded by TIG to investigate the welding property. Optical microscopy (OM), scanning electron microscopy (SEM) and universal tensile testing machine were used...

  • Correlation between chemical vapor deposited diamond and carbon fibers substrates. Almeida, Erica Cristina; Trava-Airoldi, Vladimir Jesus; Baldan, Mauricio Ribeiro; Rosolen, José Mauricio; Ferreira, Neidenei Gomes // Journal of Materials Science;Apr2007, Vol. 42 Issue 7, p2250 

    Diamond film formation has been studied on carbon felts (CF) substrates produced from polyacrylonitrile precursor, at different heat treatment temperatures (HTT). Scanning electron microscopy images have revealed a polycrystalline and preferential (111) diamond film covering the whole CF...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics