TITLE

Photoconduction in germanium and phosphorus doped silica waveguides

AUTHOR(S)
Kashyap, Raman; Maxwell, Graeme D.; Williams, Doug L.
PUB. DATE
January 1993
SOURCE
Applied Physics Letters;1/18/1993, Vol. 62 Issue 3, p214
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the photoconductivity of silica wave guides doped in germanium and phosphorus. Proposal of two possible forms of defect; Use of flame hydrolysis deposition for fabrication of wave guides; Measurement of the refractive index through commercial prism coupler.
ACCESSION #
4329432

 

Related Articles

  • Second-harmonic scanning optical microscopy of poled silica waveguides. Pedersen[a], Kjeld; Bozhevolnyi, Sergey I.; Arentoft, Jesper; Kristensen, Martin; Laurent-Lund[b], Christian // Journal of Applied Physics;10/1/2000, Vol. 88 Issue 7, p3872 

    Presents the results of detailed investigations of second-harmonic scanning optical microscopy of poled silica-based waveguides. Oblique transmission reflection mode; Normal reflection mode.

  • Effect of reactive ion etching–generated sidewall roughness on propagation loss of buried-channel silica waveguides. Bazylenko, M. V.; Gross, M.; Faith, M. // Applied Physics Letters;10/7/1996, Vol. 69 Issue 15, p2178 

    Different mask materials (photoresist and amorphous silicon) and different sample temperatures can influence the roughness of sidewalls produced during reactive ion etching of silica. Buried-channel waveguides with different microroughness on the core sidewalls (corrugation periods less than 1...

  • Ultraviolet laser fabrication of strong, nearly polarization-independent Bragg reflectors in.... Strasser, Thomas A.; Erdogan, Turan; White, Alice E.; Mizrahi, Victor; Lemaire, Paul J. // Applied Physics Letters;12/26/1994, Vol. 65 Issue 26, p3308 

    Examines the fabrication of Bragg reflectors in germanium-doped silica waveguides on silica substrates. Ability of Bragg phase gratings to fabricate the reflectors; Demonstration of narrower spectral widths in Bragg reflectors; Dependence of reflection passband on polarization.

  • Rare earth doped silica waveguides on Si fabricated by flame hydrolysis deposition and aerosol.... Bebbington, J.A.; Barbarossa, G.; Bonar, J.R.; Aitchison, J.S. // Applied Physics Letters;1/25/1993, Vol. 62 Issue 4, p337 

    Examines the fabrication of silica optical waveguides on silicon by flame hydrolysis deposition and aerosol doping technique. Employment of erbium ions during deposition process; Details on nebulized solution strength and delivery rate of aerosol; Fluorescence lifetime of erbium doped silica...

  • High temperature proton implantation induced photosensitivity of Ge-doped SiO[sub 2] planar... Hughes, P. J.; Knights, A. P. // Applied Physics Letters;5/31/1999, Vol. 74 Issue 22, p3311 

    Explores the possibility of using high temperature proton implantation to enhance the photosensitivity of germanium-doped silica planar waveguides. Defects induced by room temperature implantation; Hydrogenation techniques used to enhance the concentration of neutral oxygen vacancy centers.

  • Gain limiting processes in Er-doped Si nanocrystal waveguides in SiO[sub 2]. Kik, P. G.; Polman, A. // Journal of Applied Physics;1/1/2002, Vol. 91 Issue 1, p534 

    Erbium-doped Si nanocrystal based optical waveguides were formed by Er and Si ion implantation into SiO[sub 2]. Optical images of the waveguide output facet show a single, well-confined optical mode. Transmission measurements reveal a clear Er related absorption of 2.7 dB/cm at 1.532 μm,...

  • Reflection-type 2x2 optical waveguide switch using the Goos-Ha¨nchen shift effect. Sakata, Tomomi; Togo, Hiroyoshi; Shimokawa, Fusao // Applied Physics Letters;5/15/2000, Vol. 76 Issue 20 

    We have designed a structure for a 2x2 silica-based optical waveguide switch that is based on a thermocapillarity effect. This switch can use the reflection walls on both sides of the slit, because the Goos-Ha¨nchen shift effect was taken into account when the structure of the waveguides and...

  • High-aperture optical waveguides based on fluorine-doped silica glass. Guryanov, A.; Salganskii, M.; Khopin, V.; Kosolapov, A.; Semenov, S. // Inorganic Materials;Jul2009, Vol. 45 Issue 7, p823 

    The dependence of fluorine incorporation into silica glass on conditions of the optical waveguide blank manufacture using the method of modified chemical vapor deposition (MCVD) is studied. The degree of fluorine incorporation at constant consumption of a fluoridizer (SiF4) is shown to increase...

  • Photoluminescence of terbium-organic complex in aerosol—gel-derived planar waveguides. Jenouvrier, P.; Cela, E.; Coutier, C.; Langlet, M.; Rimet, R.; Fick, J. // Applied Physics B: Lasers & Optics;2001, Vol. 73 Issue 5/6, p463 

    This work deals with the low-temperature preparation of optically active silica-based materials. Tb[sup 3+] -doped silica monolithic gels were elaborated at 40 °C. Tb[sup 3+] –SSA-doped SiO[sub 2] –TiO[sub 2] thin films were deposited by an original sol–gel approach, the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics