Spatially resolved electrical characterization of a YBa[sub 2]Cu[sub 3]O[sub 7-delta] flux

Husemann, K.-D.; Gross, R.; Huebener, R.P.; Roas, B.
May 1993
Applied Physics Letters;5/31/1993, Vol. 62 Issue 22, p2871
Academic Journal
Examines the transport properties of YBa[sub 2]Cu[sub 3]O[sub 7-delta] flux transformer using scanning electron microscopy. Application of SrTiO[sub 3] that serves as an insulator adapting the crossover technology; Masking of the layers via optical lithography; Evolution of a three-layer flux transformer.


Related Articles

  • Epitaxial growth of NiSi2 on (111)Si inside 0.1–0.6 μm oxide openings prepared by electron beam lithography. Yew, J. Y.; Chen, L. J.; Nakamura, K. // Applied Physics Letters;8/12/1996, Vol. 69 Issue 7, p999 

    Epitaxial growth of NiSi2 on (111)Si inside 0.1–0.6 μm oxide openings prepared by electron beam lithography has been studied by field emission scanning electron microscopy, transmission electron microscopy, and thin-film stress measurement. Striking effects of size and shape of deep...

  • Monitoring lithography product data for real-time focus control. Peters, Kurt M.; Creighton, Michael // Microlithography World;Nov2004, Vol. 13 Issue 4, p22 

    The difference between the width of the bottom of an isolated resist line and the width of the top can be extracted from CD-SEM data and used as a focus monitor metric. This facilitates real-time on-product focus control and the prompt identification of aberration and illumination drifts without...

  • Fabrication of three-dimensional (3D) woodpile structure photonic crystal with layer by layer e-beam lithography. Li Wang; Sasa Zhang; Qingpu Wang; Jiaqi Chen; Wei Jiang; Chen, Ray T. // Applied Physics A: Materials Science & Processing;May2009, Vol. 95 Issue 2, p329 

    Photonic crystal based superprism offers a way to design new optical components for beam steering and DWDM (Dense Wavelength Division Multiplexing) application. Three-dimensional (3D) photonic crystals are especially attractive as they could offer more control of the light beam. A FCT...

  • Joining of Broken Multiwalled Carbon Nanotubes Using an Electron Beam-Induced Deposition (EBID) Technique. Dhall, Shivani; Vaidya, Gayatri; Jaggi, Neena // Journal of Electronic Materials;Sep2014, Vol. 43 Issue 9, p3283 

    In the present work, joining of broken multiwalled carbon nanotubes (MWCNTs) via an electron beam-induced deposition technique is discussed. Current-induced breakdown caused by Joule heating was achieved by applying an appropriate sweep voltage. Scanning electron microscopy images indicated...

  • Self-organized fabrication of periodic arrays of vertical, ultra-thin nanopillars on GaAs surfaces. Riedl, Thomas; Lindner, Jörg. K. N. // Physica Status Solidi. A: Applications & Materials Science;Dec2014, Vol. 211 Issue 12, p2871 

    This paper presents a low-cost procedure that allows for self-organized fabrication of periodically arranged, sub-50 nm diameter, vertical-sidewall GaAs nanopillars on GaAs surfaces based on nanosphere lithography, and reactive ion etching (RIE). Monodispersed polystyrene (PS) sphere double...

  • Characterization of superconducting nanowire single-photon detector with artificial constrictions. Ling Zhang; Lixing You; Dengkuan Liu; Weijun Zhang; Lu Zhang; Xiaoyu Liu; Junjie Wu; Yuhao He; Chaolin Lv; Zhen Wang; Xiaoming Xie // AIP Advances;Jun2014, Vol. 4 Issue 6, p1 

    Statistical studies on the performance of different superconducting nanowire singlephoton detectors (SNSPDs) on one chip suggested that random constrictions existed in the nanowire that were barely registered by scanning electron microscopy. With the aid of advanced e-beam lithography,...

  • Submicron patterning of a catalyst film by scanning probe nanolithography for a selective chemical vapor deposition of carbon nanotubes. Parisse, P.; Verna, A.; Rinaldi, M.; Bussolotti, F.; Grossi, V.; Passacantando, M.; Nardone, M.; Santucci, S.; Ottaviano, L. // Journal of Applied Physics;3/15/2007, Vol. 101 Issue 6, p066101 

    Submicrometric catalyst patterns have been fabricated by atomic force nanolithography and the subsequent selective growth of carbon nanotubes has been successfully verified. Rectangular stripes (∼350 nm wide) were engraved onto a polymethylmethacrylate film, deposited onto SiO2/Si, by...

  • High Resolution Lithography as a Tool to Fabricate Quasiperiodic Crystals. Petti, Lucia; Matarazzo, Vitantonio; Rippa, Massimo; Zito, Gianluigi; De Nicola, Sergio; Abbate, Giancarlo; Mormile, Pasquale // AIP Conference Proceedings;10/7/2009, Vol. 1176 Issue 1, p146 

    Photonic crystal (PC) structures have attracted great attention for their property to forbid the propagation of the light at fixed wavelengths and the intriguing possibility to realize an all-optical integrated circuit for devices of new emerging technologies. Recently, important efforts have...

  • Growth of patterned island arrays to identify origins of thin film stress. Chason, E.; Shin, J. W.; Chen, C.-H.; Engwall, A. M.; Miller, C. M.; Hearne, S. J.; Freund, L. B. // Journal of Applied Physics;2014, Vol. 115 Issue 12, p123519-1 

    To understand the origins of stress in thin films, we have used wafer curvature to measure the stress evolution during electrodeposition of Ni on lithographically patterned Si substrates. The stress is measured as the hemispherical islands grow and impinge upon each other, forming interfacial...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics