TITLE

Epitaxial growth of Pb(Zr,Ti)O[sub 3] films on MgAl[sub 2]O[sub 4] by pulsed laser deposition

AUTHOR(S)
Ling, S.H.; Tang, Y.S.; Au, W.S.; Wong, H.K.
PUB. DATE
April 1993
SOURCE
Applied Physics Letters;4/12/1993, Vol. 62 Issue 15, p1757
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Explores the epitaxial growth of Pb(Zr,Ti)O[sub 3] films on MgAl[sub 2]O[sub 4] by pulsed laser deposition. Existence of a stringent restriction on the substrate temperature and oxygen pressure; Effect of substrate temperature on the growth; Alignment of the films.
ACCESSION #
4323088

 

Related Articles

  • Colossal magnetoresistance effect in perovskite-type La-Sn-Mn-O epitaxial films. Xiangxin Guo; Shouyu Dai; Yueliang Zhou; Guozhen Yang; Zhenghao Chen // Applied Physics Letters;11/22/1999, Vol. 75 Issue 21, p3378 

    Reports that La-Sn-Mn-O thin films have been epitaxially grown on single-crystal substrates by pulsed-laser deposition. Perovskite structure of the films; Performance of the colossal magnetoresistance effect; Dependence of electrical transport and magnetic properties on the film thickness.

  • Epitaxial growth of single-crystal Ca[sub 1-x]Sr[sub x]CuO[sub 2] thin films by pulsed-laser.... Norton, D.P.; Chakoumakos, B.C.; Budai, J.D.; Lowndes, D.H. // Applied Physics Letters;4/5/1993, Vol. 62 Issue 14, p1679 

    Examines the epitaxial growth of single-crystal Ca[sub 1-x]Sr[sub x]CuO[sub 2] thin films by pulsed laser evaporation. Single-target codeposition growth scheme; Characterization of the films using four-circle x-ray diffractometry; Dependence of c-axis lattice constant on strontium content.

  • Epitaxial metallic LaNiO[sub 3] thin films grown by pulsed laser deposition. Satyalakshmi, K.M.; Mallya, R.M.; Ramanathan, K.V.; Wu, X.D.; Brainard, B.; Gautier, D.C.; Vasanthacharya, N.Y.; Hegde, M.S. // Applied Physics Letters;3/15/1993, Vol. 62 Issue 11, p1233 

    Characterizes the formation of epitaxial metallic lanthanum nickel trioxide (LNO) thin films using pulsed laser deposition. Crystallinity of LNO films; Resistivity of LNO films to electricity; Diffusion of nickel ion from the LNO film into yttrium barium copper oxide films.

  • Epitaxial ferroelectric Ba[sub 0.5]Sr[sub 0.5]TiO[sub 3] thin films for room-temperature tunable... Chen, C.L.; Feng, H.H.; Zhang, Z.; Brazdeikis, A.; Huang, Z.J.; Chu, W.K.; Chu, C.W.; Miranda, F.A.; Van Kuels, F.W.; Romanofsky, R.R.; Liou, Y. // Applied Physics Letters;7/19/1999, Vol. 75 Issue 3, p412 

    Reports on the synthesis of perovskite barium[sub 0.5]strontium[sub 0.5]titanium oxygen[sub 3] thin films by pulsed laser ablation. Crystalline quality of the epitaxial films; Dielectric property measurements; Dielectric constant.

  • Structural and optical properties of wurtzite Mg[sub x]Zn[sub 1-x]S (0≤x≤0.25) films grown on (0001) Al[sub 2]O[sub 3] by pulsed-laser deposition. Ong, H. C.; Dai, J. Y. // Applied Physics Letters;8/19/2002, Vol. 81 Issue 8, p1444 

    Wurtzite Mg[sub χ]Zn[sub 1-χ]S (0 ≤ χ ≤ 0.25) thin films have been epitaxially grown on (0001) Al[sub 2]O[sub 3] using pulsed-laser deposition. High-quality films can be prepared at a growth temperature of 450-550 °C with (0001) ω-rocking curve full width at half...

  • Growth of epitaxial strontium barium niobate thin films by pulsed laser deposition. Thony, S. Schwyn; Youden, K.E. // Applied Physics Letters;10/17/1994, Vol. 65 Issue 16, p2018 

    Reports the growth of epitaxial strontium barium niobate (SBN) thin films by pulsed laser deposition (PLD). Applications of SBN for holographic storage and beam steering; Formation of crystalline SBN; Importance of PLD in the incorporation of dopants into films.

  • Atomically defined epitaxy and physical properties of strained La[sub 0.6]Sr[sub 0.4]MnO[sub 3] films. Izumi, M.; Konishi, Y.; Nishihara, T.; Hayashi, S.; Shinohara, M.; Kawasaki, M.; Tokura, Y. // Applied Physics Letters;10/26/1998, Vol. 73 Issue 17 

    La[sub 0.6]Sr[sub 0.4]MnO[sub 3] thin films were fabricated on SrTiO[sub 3] (001) substrates using pulsed laser deposition with observing persistent intensity oscillation of reflection high-energy electron diffraction. By atomic force microscopy, the surface of resulting films was confirmed to...

  • Pulsed-laser-deposited epitaxial Sr[sup 2]FeMoO[sub 6 - y] thin films: Positive and negative... Asano, H.; Ogale, S.B. // Applied Physics Letters;6/14/1999, Vol. 74 Issue 24, p3696 

    Describes how epitaxial thin films of ordered double-perovskite Sr[sub 2]FeMoO[sub 6-y] are deposited on SrTiO[sub 3] substrates by pulsed-laser deposition using a two step growth process. Selection of growth condition; Highly conductive metallic thin films or semiconducting films; Positive...

  • Growth mode mapping of SrTiO[sub 3] epitaxy. Lippmaa, M.; Nakagawa, N.; Kawasaki, M.; Ohashi, S.; Koinuma, H. // Applied Physics Letters;4/24/2000, Vol. 76 Issue 17 

    We have mapped the growth mode of homoepitaxial SrTiO[sub 3] thin films as a function of deposition rate and substrate temperature during pulsed laser deposition. The transition from layer by layer growth to step flow growth was mapped by making 260 depositions, 3 monolayers each, on a single...

  • Structural investigation of Fe silicide films grown by pulsed laser deposition. Karpenko, O. P.; Olk, C. H.; Yalisove, S. M.; Mansfield, J. F.; Doll, G. L. // Journal of Applied Physics;8/15/1994, Vol. 76 Issue 4, p2202 

    Provides information on a study which investigated the use of pulsed laser deposition (PLD) to grow epitaxial B-FeSi[sub2] films on Si(111) (1X1) and Si(111) (7X7) with various epitaxial orientations and three rotational variants. Factors that influenced the silicide growth; Content of films...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics