TITLE

Enhancement of diffusion-induced grain boundary migration by ion irradiation

AUTHOR(S)
Alexander, Dale E.; Rehn, L.E.; Baldo, P.M.; Gao, Y.
PUB. DATE
April 1993
SOURCE
Applied Physics Letters;4/5/1993, Vol. 62 Issue 14, p1597
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Describes the effect of irradiation on diffusion induced grain boundary migration (DIGM) in Au during ion mixing of Au/Cu bilayers. Enhancement of DIGM by ion irradiation; Identification of alloyed zones by cross section transmission electron microscopy; Use of Rutherford backscattering spectrometry.
ACCESSION #
4323036

 

Related Articles

  • Cross-Interaction Between Au and Cu in Au/Sn/Cu Ternary Diffusion Couples. Chang, C. W.; Lee, Q. P.; Ho, C. E.; Kao, C. R. // Journal of Electronic Materials;Feb2006, Vol. 35 Issue 2, p366 

    Both Au and Cu are so-called fast diffusers in Sn, and can diffuse very long distances in Sn in a relatively short time. In this study, the cross-interaction between Au and Cu across a layer of Su was investigated through the use of the Au/Sn/Cu ternary diffusion couples. A 7-µm Au layer and...

  • Diffusion and electromigration in lead alloys. II. Ag, Au, and Cu in lead-indium. Shi, Jinghong; Mei, Shao-ning; Huntington, H. B. // Journal of Applied Physics;7/15/1987, Vol. 62 Issue 2, p451 

    Presents a study that investigated the diffusion and electromigration of several elements in lead-indium alloys. Gold; Silver; Copper.

  • Interdiffusion and resistivity of Cu/Au, Cu/Co, Co/Au, and Cu/Co/Au thin films at 25–550 °C. Madakson, Peter; Liu, Joyce C. // Journal of Applied Physics;9/1/1990, Vol. 68 Issue 5, p2121 

    Presents a study which investigated the interdiffusion and resistivity of copper/gold, copper/cobalt, cobalt/gold, and copper/cobalt/gold thin films. Experimental procedure; Results of the study; Conclusions.

  • Phase diagram of Au-Al-Cu at 500 °C. Li, Jyun; Lo, Pei; Ho, Ming; Hsieh, Ker-Chang // Gold Bulletin;Sep2014, Vol. 47 Issue 3, p167 

    Diffusion couples and equilibrated alloys were used to construct the isothermal phase diagram of Au-Al-Cu at 500 °C. Electron microprobe analyses were performed to determine the phase compositions and phase relationships. Two ternary phases and 10 three-phase equilibriums were determined in...

  • Diffusion mechanism in the gold-copper system. Ravi, R.; Paul, A. // Journal of Materials Science: Materials in Electronics;Dec2012, Vol. 23 Issue 12, p2152 

    Interdiffusion study is conducted in the Au-Cu system, which has complete solid solution in the higher temperature range and ordered phases in the lower temperature range. First experiments are conducted at higher temperatures, where atoms can diffuse randomly. Higher values of interdiffusion...

  • Diffusion Bonding of Stainless Steel to Copper with Tin Bronze and Gold Interlayers. Xiong, Jiang-tao; Xie, Qing; Li, Jing-long; Zhang, Fu-sheng; Huang, Wei-dong // Journal of Materials Engineering & Performance;Jan2012, Vol. 21 Issue 1, p33 

    Vacuum diffusion bonding of stainless steel to copper was carried out at a temperature ranging from 830 to 950 °C under an axial pressure of 3 MPa for 60 min with three kinds of interlayer metals: tin-bronze (TB) foil, Au foil, and TB-Au composite interlayer. The results showed that the grain...

  • Solid-Phase Diffusion at a Galvanostatic Anodic Dissolution of Zn-Ag and Cu-Au Alloy. Kozaderov, O. A.; Bobrinskaya, E. V.; Kartashova, T. V.; Vvedenskii, A. V. // Protection of Metals;Sep2005, Vol. 41 Issue 5, p449 

    The ionization stages of copper and zinc at a galvanostatic anodic dissolution of Zn-Ag and Cu-Au alloys in acidic chloride environment are found to be electrochemically nonequilibrium. Selective dissolution of the alloys is limited by the transient mutual diffusion of components within a...

  • Rapid lateral solidification of pure Cu and Au thin films encapsulated in SiO2. Kline, J. E.; Leonard, J. P. // Applied Physics Letters;5/16/2005, Vol. 86 Issue 20, p201902 

    Excimer laser melting and lateral resolidification is demonstrated in 200 nm thick Cu and Au elemental metal thin films encapsulated between SiO2 layers. Projection irradiation is used to selectively and completely melt lines 3 to 30 μm wide in the metal film—with rapid lateral...

  • Enhancement in sensitivity of copper sulfide thin film ammonia gas sensor: Effect of swift heavy ion irradiation. Sagade, Abhay Abhimanyu; Sharma, Ramphal; Sulaniya, Indra // Journal of Applied Physics;Feb2009, Vol. 105 Issue 4, pN.PAG 

    The studies are carried out on the effect of swift heavy ion (SHI) irradiation on surface morphology and electrical properties of copper sulfide (CuxS) thin films with three different chemical compositions (x values). The irradiation experiments have been carried out on CuxS films with x=1.4,...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics