Selection of targets and ion sources for radioactive ion beam generation at the Holifield

Alton, G.D.
November 1996
Review of Scientific Instruments;Nov96, Vol. 67 Issue 11, p3831
Academic Journal
Describes the performance characteristics for a selected number of target ion sources that will be employed for initial use at the Holifield Radioactive Ion Beam Facility. Prototype ion sources that show promise for future use for radioactive ion beam applications; Present efforts to select target materials and to design composite target matrix/heat-sink systems.


Related Articles

  • Radioactive ion beams at the HRIBF. Stracener for the HRIBF Staff, D. W. // AIP Conference Proceedings;2001, Vol. 576 Issue 1, p257 

    The Holifield Radioactive Ion Beam Facility (HRIBF) is now delivering beams of radioactive ions for nuclear physics experiments. The radioactive ions are produced using the Isotope-Separator-On-Line (ISOL) technique and then injected into a 25 MV tandem electrostatic accelerator and accelerated...

  • Bunching and cooling of radioactive ions with REXTRAP. Ames, F.; Beck, D.; Bollen, G.; Forstner, O.; Habs, D.; Huber, G.; Reisinger, K.; Schmidt, P. // AIP Conference Proceedings;2002, Vol. 606 Issue 1, p609 

    The properties of radioactive ion beams produced by the present on-line target ion source technology are often not suitable for direct post acceleration. For that purpose pulsed and cooled beams of higher charged ions are required. In the case of REX-ISOLDE, the post accelerator at the...

  • Prototype negative-ion sources for radioactive ion-beam generation. Alton, G.D.; Welton, R.F.; Williams, C.; Cui, B.; Murray, S.N. // Review of Scientific Instruments;Jun98, Vol. 69 Issue 6, p2313 

    Investigates hot carbon nitrogen oxygen cycles and rp stellar nuclear synthesis processes based on radioactive ion beams of [sup 17]F and [sup 18]F. Process of generating useful beam intensities of atomic F[sup -]; Evaluation of prototype negative ion sources; Presentation of mechanical design...

  • Constraints due to the production of radioactive ion beams in the SPIRAL project. Leroy, R.; Villari, A. C. C.; Jardin, P.; Marry, C.; Pacquet, J. Y.; Huguet, Y. // Review of Scientific Instruments;Feb1998, Vol. 69 Issue 2, p758 

    Describes the constraints in the production of radioactive ion beams. Production of the ion beam through the interaction between a primary ion beam and a carbon target; Diffusion of the ion beam out of the target; Implications of the diffusion for the environment of the target.

  • Commissioning and initial operation of a radioactive beam ion source at ISAC. Dombsky, M.; Bishop, D.; Bricault, P.; Dale, D.; Hurst, A.; Jayamanna, K.; Keitel, R.; Olivo, M.; Schmor, P.; Stanford, G. // Review of Scientific Instruments;Feb2000, Vol. 71 Issue 2, p978 

    Focuses on successful production of a radioactive ion beam at an isotope separator accelerator (ISAC) radioactive beam facility. On-line target/ion source performance; ISAC target module; Remote handling; Beam diagnostics.

  • The Production and Acceleration of RIBs at ISAC-I and Future Plans for ISAC-II. Laxdal, R.E. // AIP Conference Proceedings;2003, Vol. 680 Issue 1, p249 

    ISAC-I at TRIUMF is now delivering intense beams of both low energy and accelerated radioactive ion beams (RIBs) for experiments. The post-accelerator for ISAC-I includes a room temperature RFQ and DTL operating cw to accelerate ions of A ≤ 30 to a final energy fully variable from 0.153 to...

  • Accelerating Radioactive Ion Beams With REX-ISOLDE. Ames, F.; Bollen, G.; Cederkäll, J.; Emhofer, S.; Forstner, O.; Habs, D.; Huber, G.; Kester, O.; Reisinger, K.; Schwalm, D.; Sieber, T.; Van Den Bergh, P.; Van Duppen, P.; von Hahn, R.; Wenander, F.; Wolf, B. // AIP Conference Proceedings;2003, Vol. 680 Issue 1, p245 

    The post accelerator REX-ISOLDE is installed at the ISOLDE facility at CERN, where a broad variety of radioactive ions can be addressed. Since the end of 2001 beams at the final energy of 2.2 MeV/u are available. REX-ISOLDE uses a unique system of beam bunching and charge breeding. First a...

  • A Universal Method For Effusive-Flow Characterization of Target/Vapor Transport Systems For RIB Generation. Bilheux, J.-C.; Alton, G.D.; Liu, Y.; Cole, J.M.; Williams, C. // AIP Conference Proceedings;2003, Vol. 680 Issue 1, p241 

    Decay losses associated with the times required for diffusion-release from ISOL production targets and to effusively-flow to the ion source are principal means whereby short half-life radioactive species are lost between initial formation and utilization. We have developed an experimental method...

  • REX-ISOLDE-post-accelerated radioactive beams at cern-ISOLDE. Nilsson, T.; Äystö, J.; Forstner, O.; Ravn, H. L.; Oinonen, M.; Simon, H.; Cederkäll, J.; Weissman, L.; Habs, D.; Ames, F.; Kester, O.; Sieber, T.; Bongers, H.; Emhofer, S.; Reiter, P.; Thirolf, P. G.; Bollen, G.; Schmidt, P.; Huber, G.; Liljeby, L. // AIP Conference Proceedings;2001, Vol. 576 Issue 1, p265 

    The ISOLDE RIB-facility at CERN has today been producing a vast range of radioactive beams since more than 30 years. The low-energy beams of ISOLDE will be complemented by a post-accelerator, REX-ISOLDE, currently being assembled. In order to convert the pseudo-DC, singly-charged beam from the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics