Improved sample-holder design for specific-heat measurements in magnetic fields up to 17.5 T

Klaasse, J.C.P.; Hagmusa, I.H.; Bruck, E.
November 1997
Review of Scientific Instruments;Nov97, Vol. 68 Issue 11, p4208
Academic Journal
Presents the results obtained with a sample holder made of cold-worked silver and equipped with a combination thermometer with a lower magnetoresistance. Accuracy of low-temperature specific-heat measurements in a certain temperature range; Error margin for large heat capacities.


Related Articles

  • Direct temperature monitoring for semiconductors in plasma immersion ion implantation. Tian, Xiubo; Xiubo Tian; Chu, Paul K. // Review of Scientific Instruments;Jul2000, Vol. 71 Issue 7 

    In situ temperature monitoring is extremely important in plasma immersion ion implantation (PIII) of semiconductors. For instance, the silicon wafer must be heated to 600 °C or higher in separation by plasma implantation of oxygen, and in the PIII/ion-cut process, the wafer temperature must...

  • Temperature distribution in a cylindrical furnace for high-pressure use. Kawashima, Y.; Yagi, T. // Review of Scientific Instruments;Jul1988, Vol. 59 Issue 7, p1186 

    Temperature distribution in a cylindrical furnace used in a high-pressure apparatus has been calculated by the difference method. The calculated values are in good agreement with the experimental observations obtained by an x-ray diffraction method. A steep temperature gradient exists in a...

  • A high temperature probe operating in the variable temperature insert of a commercial superconducting magnet system. Leighton, C.; Kern, John; English, Suzanne R. // Review of Scientific Instruments;Jun2002, Vol. 73 Issue 6, p2364 

    We describe the design, construction, and performance of an oven insert for performing magnetotransport measurements, which operates inside the variable temperature environment of commercial superconducting magnet systems. The probe provides a high temperature environment up to 800 K and is...

  • Comparative results for germanium and platinum thermometer calibration test data approximation Bogdanova, Nina B.; Terzijska, Bonka M. // Review of Scientific Instruments;Oct97, Vol. 68 Issue 10, p3766 

    Presents a description of the functions R(T) and T(R) for germanium resistance thermometer and platinum resistance thermometer using a special weighted orthonormal polynomial expansion method (OPEM). Approximation problems; Reliability and the advantages of the proposed OPEM.

  • A transit-time flow meter for measuring milliliter per minute liquid flow. Yang, Canqian; Kümmel, M.; So\eberg, H. // Review of Scientific Instruments;Feb1988, Vol. 59 Issue 2, p314 

    A transit-time flow meter, using periodic temperature fluctuations as tracers, has been developed for measuring liquid flow as small as 0.1 ml/min in microchannels. By injecting square waves of heat into the liquid flow upstream with a tiny resistance wire heater, periodic temperature...

  • Design aspects of a modular instrumentation system for thermal diagnostic studies. Rubey, Wayne A.; Grant, Richard A. // Review of Scientific Instruments;Feb1988, Vol. 59 Issue 2, p265 

    A laboratory instrumentation system has been developed which provides flexibility for conducting an extensive range of thermal investigations of organic materials. Test samples can be of gaseous, liquid, solid, polymeric, composite, or even multiphase nature. This modular system uses an...

  • 500 °C infrared absorption cell. Robinson, A. M.; Billing, M.; Garand, D. // Review of Scientific Instruments;Feb1988, Vol. 59 Issue 2, p249 

    A high-temperature IR-transmitting absorption cell has been designed and tested. The cell is heated by utilizing the cell wall as the heating element. A PTFE (Teflon) gasket double-window assembly allows temperatures as high as 500 °C to be attained. Temperature uniformity of 4 °C is...

  • Cryogenic Temperature Indicator And Controller.  // Physics Today;Jul90, Vol. 43 Issue 7, p75 

    Reviews a cryogenic temperature indicator and controller from Scientific Instruments.

  • Analysis of dopant concentration effects in praseodymium-based fluorescent fiber optic temperature sensors. Mitchell, I. R.; Mitchell, I.R.; Farrell, P. M.; Farrell, P.M.; Baxter, G. W.; Baxler, G.W.; Collins, S. F.; Collins, S.F.; Grattan, K. T. V.; Grattan, K.T.V.; Sun, T. // Review of Scientific Instruments;Jan2000, Vol. 71 Issue 1 

    An analysis of concentration effects in praseodymium-doped glasses used as the sensor element of several fiber optic temperature sensors has been performed. Results show the dependence of a range of relevant parameters on concentration, and the determination of concentration-independent...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics