TITLE

Thermal conductivity of thin metallic films measured by photothermal profile analysis

AUTHOR(S)
Langer, G.; Hartmann, J.; Reichling, M.
PUB. DATE
March 1997
SOURCE
Review of Scientific Instruments;Mar97, Vol. 68 Issue 3, p1510
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Discusses the measurement of thermal conductivity of nickel and gold films on quartz using a modulated thermoreflectance technique. Recording of surface temperature profile; Model calculations' prediction of an optimum frequency for measuring thermal transport within the film; Gold films' reduced conductivity with decreasing film thickness.
ACCESSION #
4320532

 

Related Articles

  • Segregation and surface transport of impurities: New mechanisms affecting the surface morphology... Balandin, V. Yu.; Gernert, U. // Journal of Applied Physics;3/15/1997, Vol. 81 Issue 6, p2835 

    Presents a numerical simulation of the general motion of a liquid subjected to a lateral thermal gradient. Production of free-standing polycrystalline gold films by thermal evaporation; Calculation procedure and input parameters.

  • DISPERSIVE OPTICAL PARAMETERS OF Ni(100) CRYSTAL AND THERMALLY EVAPORATED NICKEL FILMS. ATUCHIN, V. V.; GRIGORIEVA, T. I.; POKROVSKY, L. D.; KRUCHININ, V. N.; LYCHAGIN, D. V.; RAMANA, C. V. // Modern Physics Letters B;2/20/2012, Vol. 26 Issue 5, p1150029-1 

    Structure and optical characteristics of nickel (Ni) single crystal (100) surface and thin films have been evaluated by the combined use of reflection high-energy electron diffraction (RHEED) and spectroscopic ellipsometry (SE). Nickel films were fabricated by thermal evaporation at 100°C...

  • Study of Ti/Au, Ti/Al/Au, and Ti/Al/Ni/Au ohmic contacts to n-GaN. Qin, Z.X.; Chen, Z.Z.; Tong, Y.Z.; Ding, X.M.; Hu, X.D.; Yu, T.J.; Zhang, G.Y. // Applied Physics A: Materials Science & Processing;2004, Vol. 78 Issue 5, p729 

    The contacts of Ti/Au, Ti/Al/Au, and Ti/Al/Ni/Au films deposited on n-GaN were studied by current–voltage (I–V) and transmission-line-method measurements. The effect of annealing temperature on specific contact resistivity has been investigated by changing the annealing temperature...

  • Fast and slow stress evolution mechanisms during interruptions of Volmer-Weber growth. Hang Z. Yu; Leib, Jeffrey S.; Boles, Steven T.; Thompson, Carl V. // Journal of Applied Physics;2014, Vol. 115 Issue 4, p1 

    The evolution of mechanical stress during Volmer-Weber growth of thin films is complex, often including a reversible stress evolution during interruptions of film deposition. The underlying mechanism for stress evolution during growth interruptions has been extensively debated, but remains...

  • Oxygen-free precursor for chemical vapor deposition of gold films: thermal properties and decomposition mechanism. Turgambaeva, Asiya E.; Zharkova, Galina; Semyannikov, Petr; Krisyuk, Vladislav V.; Koretskaya, Tatyana; Trubin, Sergey; Kuchumov, Boris; Igumenov, Igor // Gold Bulletin;2011, Vol. 44 Issue 3, p177 

    Thermal properties of oxygen-, phosphorus-, and halogen-free dimethylgold(III) diethyldithiocarbamate complex (CH3)2AuS2CN(C2H5)2 (gold, dimethyl(diethylcarbamodithioato -S,S')-) having excellent storage stability and the mechanism of its decomposition to elemental gold were studied. Saturated...

  • Gold (Film). Bardwell, John D. // Library Journal;4/1/1981, Vol. 106 Issue 7, p729 

    Reviews the film 'Gold: The Sacred Metal,' from International Film Foundation.

  • An integral equation study of a simple point charge model of water. Lombardero, M.; Martin, C.; Jorge, S.; Lado, F.; Lomba, E. // Journal of Chemical Physics;1/8/1999, Vol. 110 Issue 2, p1148 

    Details an integral equation study of a simple point charge model of water for a variety of thermodynamic states ranging from the vapor phase to the undercooled liquid. Good thermodynamics resulting from the use of a hard sphere fluid as reference system to provide the input reference bridge...

  • Exploring minimum film-forming temperature. Sewell, Graham // Paint & Coatings Industry;May98, Vol. 14 Issue 5, p70 

    Describes the minimum film-forming temperature (MFFT), a process by which a waterborne synthetic latex or emulsion will coalesce when laid on a substrate as a thin film. Explanation on how temperature affects the paint-drying process; Ideal way to determine the MFFT.

  • Super buckyballs. Lerner, Eric J. // Industrial Physicist;Dec2001/Jan2002, Vol. 7 Issue 6, p9 

    Reveals that a joint team from Lucent Technologies and Bell Laboratories has discovered a way for pushing a versatile buckyball-based crystal's critical temperature close to that achieved by copper-containing ceramics. Observation of outcome of injecting holes into Buckminsterfullerene-based...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics