TITLE

Steady state behavior of a multipolar plasma device

AUTHOR(S)
Carrere, M.; Cherigier, L.; Arnas-Capeau, C.; Bachet, G.
PUB. DATE
December 1996
SOURCE
Review of Scientific Instruments;Dec1996, Vol. 67 Issue 12, p4124
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Focuses on a low pressure discharge plasma, with magnetic multipolar confinement, that is produced in a cylindrical ultrahigh vacuum device. Allowing of moving Langmuir probes measurements and laser induced fluorescence diagnostic for the plasma ions; Exploration of the sheaths region in a bounded plasma; Wave turbulence in a laboratory plasma.
ACCESSION #
4320453

 

Related Articles

  • Operation of a reversed field pinch without a conducting shell. Robertson, Scott; Schmid, Peter // Physics of Fluids (00319171);Mar87, Vol. 30 Issue 3, p884 

    The Reversatron reversed field pinch (R/a = 50 cm/8 cm) [IEEE Trans. Plasma Sci. PS-14, 267 (1986)] has been operated with and without an aluminum shell surrounding the resistive toroidal vacuum chamber. Discharges without the shell have the same density, fluctuation level, and dynamo activity...

  • A vacuum ultraviolet study of rare-earth phosphor screens with application as diagnostics for hot... Baciero, A.; Placentino, L.; McCarthy, K.J.; Barquero, L.R.; Ibarra, A.; Zurro, B. // Review of Scientific Instruments;Jan1999, Vol. 70 Issue 1, p802 

    Discusses a vacuum ultraviolet study of rare-earth phosphor screens with application as diagnostics for hot plasmas. Performance of absolute efficiency measurements using a calibrated vacuum ultraviolet source; Measurements made at visible wavelengths and in the x-ray; Customization of phosphor...

  • A plasma window for vacuum-atmosphere interface and focusing lens of sources for nonvacuum ion material modification (invited). Hershcovitch, Ady // Review of Scientific Instruments;Feb1998, Vol. 69 Issue 2, p868 

    Develops a plasma window for vacuum-atmosphere interface. Sources for the nonvacuum ion material modification; Provision of vacuum atmosphere separation; Use of a helium cascade arc discharge plasma to establish the interface; Transportation of ions through the window.

  • Formation and dynamics of a Z pinch in a high current capillary discharge in initial vacuum. Wyndham, F.; Favre, M.; Aliaga-Rossel, R.; Chuaqui, H.; Mitchell, I.; Choi, P. // Journal of Applied Physics;11/1/2003, Vol. 94 Issue 9, p5537 

    Experimental conditions are presented for the formation of a Z pinch from ablated wall material in a high current, medium diameter capillary discharge without an initial filling gas. A hollow cathode geometry is used and electron beams, initiated by a laser spark, form a transient metallic...

  • Cathode fall characteristics in a dc atmospheric pressure glow discharge. Shi, J.J.; Kong, M.G. // Journal of Applied Physics;11/1/2003, Vol. 94 Issue 9, p5504 

    Atmospheric pressure glow discharges are attractive for a wide range of material-processing applications largely due to their operation flexibility afforded by removal of the vacuum system. These relatively new atmospheric plasmas are nonequilibrium plasmas with gas temperature around 100 °C...

  • Plasma-cathode-initiated vacuum gap closure. Sampayan, S. E.; Gurbaxani, S. H.; Buttram, M. T. // Journal of Applied Physics;9/1/1990, Vol. 68 Issue 5, p2058 

    Presents the properties of vacuum gap closure initiated by a plasma cathode. Details on the apparatus; Results of the removal of the Faraday cup; Measurement of the ion pulse.

  • Method for modifying the structure and elemental composition of the solid surface during a high-voltage vacuum discharge. Lupekhin, S.; Ibragimov, A. // Technical Physics;Jun2013, Vol. 58 Issue 6, p907 

    A new method for modifying the surface of a solid, which makes it possible to change effectively the structure and elemental composition of the surface with a high precision, is developed and tested experimentally. The method is based on the action of the plasma of a pulsed high-voltage vacuum...

  • Plasma Immersion Ion Processing for Coatings.  // Foundry Management & Technology;Oct2000, Vol. 128 Issue 10, p34 

    Reports that Southwest Research Institute has added both plasma immersion ion implantation and plasma immersion ion processing (PIIP) to its Ion Surface Modification Facility. Versatility of PIIP for surface modification; Vacuum technology for the application of hard, wear-resistant coatings.

  • Transportation of an electromagnetic pulse to the load in the Angara-5-1 facility. Aleksandrov, V.; Grabovski, E.; Gribov, A.; Oleinik, G.; Samokhin, A.; Sasorov, P. // Plasma Physics Reports;Nov2008, Vol. 34 Issue 11, p911 

    One of the main problems in Z-pinch experiments is to transport power and energy from the generator to the load. As the pulse produced in a double forming line propagates to the load along a water-vacuum insulator, its power and energy decrease due to current leakage in the plasma shortening the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics