TITLE

Densification effect on the microstructure and critical current density in

AUTHOR(S)
Satou, M.; Yamada, Y.; Murase, S.; Kitamura, T.; Kamisada, Y.
PUB. DATE
January 1994
SOURCE
Applied Physics Letters;1/31/1994, Vol. 64 Issue 5, p640
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the effect of higher density on the enhancement of the microstructure and critical current density value of bismuth(2223) silver tape. Use of the cold working process; Relation between oxide core density and cold working degree; Estimate of the oxide core density using Vickers hardness.
ACCESSION #
4319564

 

Related Articles

  • DEVELOPMENT OF A CRYOGENIC MECHANICAL PROPERTY TESTING STATION FOR SUPERCONDUCTING RF CAVITY MATERIAL. Compton, C.; Chandrasekaran, S. K.; Baars, D.; Bieler, T.; Darbandi, P.; Wright, N. // AIP Conference Proceedings;4/9/2010, Vol. 1218 Issue 1, p587 

    Recent concerns with pressure vessel codes as they relate to the construction of superconducting linacs have raised questions about mechanical proprieties of materials used in their fabrication at cryogenic temperatures. Pressure vessel engineering codes will require demonstration of a level of...

  • Quench tests of a 20-cm-long RABiTS YBCO tape. Lue, J. W.; Gouge, M. J.; Duckworth, R. C.; Lee, D. F.; Kroeger, D. M.; Pfotenhauer, J. M. // AIP Conference Proceedings;2002, Vol. 614 Issue 1, p321 

    A 20-cm-long YBCO tape fabricated by the Rolling Assisted Bi-axially Textured Substrate (RABiTS) technique was used to study the quench behavior of a secondgeneration high-temperature superconductor (HTS). Quench tests of the sample were performed in a conduction cooling condition with a...

  • Grain alignment in bulk YBa[sub 2]Cu[sub 3]O[sub x] superconductor by a low temperature phase.... Selvamanickam, V.; Goyal, A. // Applied Physics Letters;8/1/1994, Vol. 65 Issue 5, p639 

    Examines the grain alignment in bulk YBa[sub 2]Cu[sub 3]O[sub x] superconductor by low temperature phase transformation method. Development of a quench and directional transformation process; Role of temperature in the formation of Y[sub 2]BaCuO[sub 5]; Comparison of the magnetic field...

  • Design and performance of a portable [sup 3]He cryogenic system for ground based instrumentation. Verveer, J.; Rando, N.; Andersson, S.; Gondoin, P.; Peacock, A.; Collaudin, B. // Review of Scientific Instruments;Oct99, Vol. 70 Issue 10, p4088 

    Reports on the design and performance of a complete ground based cryogenic system consisting of [sup 3]He cryosorption refrigerator and designed to cool a 6x6 element detector array of tantalum based superconducting tunnel junctions. Minimization of the use of magnetic materials; Use of the...

  • Cryogenic system upgrade for the National Superconducting Cyclotron Laboratory. McCartney, A.; Ganni, V.; Laumer, H.; Arenius, D.; Creel, J.; Chronis, W.; Davidson, K. // AIP Conference Proceedings;2002, Vol. 613 Issue 1, p207 

    The National Superconducting Cyclotron Laboratory (NSCL) is a National Science Foundation supported facility, with additional support from Michigan State University (MSU). The facility consists of two superconducting cyclotrons and over fifty individual cryostats, each containing several...

  • Delivery mechanism for electrical energy being explored. Engelke, Roger // Electronic Design;04/19/99, Vol. 47 Issue 8, p28 

    Reports on the development of high-temperature superconducting (HTS) transformers to improve the delivery of electrical energy in the United States. Enhancements including higher electrical efficiency and substation capacity; Employment of a liquid-nitrogen design to reduce transformer fires...

  • Cooling of a superconductor by quasiparticle tunneling. Manninen, A.J.; Suoknuuti, J.K.; Leivo, M.M.; Pekola, J.P. // Applied Physics Letters;5/17/1999, Vol. 74 Issue 20, p3020 

    Studies the cryogenic cooling of a superconductor by quasiparticle tunneling. Superconducting transition temperature; Electron system of the titanium strip; Determination of electron temperature from zero-bias resistance.

  • Implications of the Tevatron operating experience for 1000-W refrigerator systems (invited). Rode, C. H. // Review of Scientific Instruments;May86, Vol. 57 Issue 5, p798 

    The design principles and concepts for the Tevatron cryogenic system have been proven to be a viable way to deal with refrigeration maintenance and repair as well as magnet replacement. The operating experience and techniques are directly applicable for smaller systems (and also for larger ones...

  • PROCESS FLOW AND FUNCTIONAL ANALYSIS OF THE ITER CRYOGENIC SYSTEM. Henry, D.; Chalifour, M.; Forgeas, A.; Kalinin, V.; Monneret, E.; Serio, L.; Vincent, G.; Voigt, T. // AIP Conference Proceedings;4/9/2010, Vol. 1218 Issue 1, p676 

    The ITER cryogenic system is presently under design by a large international collaboration. It will start commissioning at Cadarache, south of France in 2015. The system is designed to provide an equivalent refrigeration capacity of 65 kW at 4.5 K for the superconducting magnet and 1300 kW at 80...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics