Coexistence of grains with differing orthorhombicity in high quality

de Obaldia, E.I.; Ludwig Jr., K.F.; Berkowitz, S.J.; Clark, A.M.; Skocpol, W.J.; Mankiewich, P.M.; Rudman, D.A.; Roshko, A.; Moerman, R.; Vale, L.; Ono, R.H.
December 1994
Applied Physics Letters;12/26/1994, Vol. 65 Issue 26, p3395
Academic Journal
Examines the growth of YBa[sub 2]Cu[sub 3]O[sub 7-delta] films on LaAlO[sub 3] by pulsed-laser deposition. Coexistence of grains in thin films; Proportion of axial grains from film to film; Determination of electrical quality films by small rotation of in-plane epitaxy.


Related Articles

  • Fabrication and photosensitivity of AgInSe[sub 2]/III�VI isotypic heterojunctions. Rud�, V. Yu.; Gremenok, V. F.; Rud�, Yu. V.; Bekimbetov, R. N.; Bodnar�, I. V. // Semiconductors;Oct99, Vol. 33 Issue 10, p1097 

    AgInSe[sub 2] thin films on glass substrates have been prepared by pulsed laser deposition. Rectifying heterojunctions with a pronounced photovoltaic effect have been fabricated for the first time by placing such films in optical contact with layered III-VI (InSe, GaSe) semiconductors. The...

  • Critical dimensions for YBCO islands grown by pulsed laser deposition. Gilmore, C.M.; Kim, J. // Applied Physics A: Materials Science & Processing;2002, Vol. 75 Issue 5, p565 

    Islands of constant width at half maximum of approximately 100 nm have been observed during the pulsed laser deposition of films of nominal thickness from 0.7 to 3.0 nm of the material YBa[sub 2] Cu[sub 3] O[sub 7-d] (YBCO) on substrates of SrTiO[sub 3] . The critical island dimensions of width,...

  • Laser deposition of diamondlike carbon films at high intensities. Qian, F.; Singh, R.K. // Applied Physics Letters;11/20/1995, Vol. 67 Issue 21, p3120 

    Presents a method of laser deposition of diamondlike carbon films at high intensities. Utilization of high titanium: sapphire solid state laser system in the process; Analysis of the film quality using scanning and transmission electron microscopy; Production of smooth, partially transparent films.

  • On the growth mechanisms of thin films produced by pulsed laser deposition. McKinnon, J.; Ionescu, M.; Shi, D. Q.; Dou, S. X. // AIP Conference Proceedings;2002, Vol. 614 Issue 1, p547 

    For more than ten years Pulsed Laser Deposition (PLD) has been used to produce Y[sub 1]Ba[sub 2]Cu[sub 3]O[sub 7-δ] (YBCO) thin films. Most groups have reported their capacity to produce films with roughly optimum characteristics. Unfortunately, the deposition parameters used by the...

  • Structural characterization of YBCO films formed on ISD MgO buffered metal substrates by pulsed laser deposition. Li, M.; Ma, B.; Koritala, R. E.; Fisher, B. L.; Maroni, V. A.; Balachandran, U. // AIP Conference Proceedings;2002, Vol. 614 Issue 1, p531 

    A biaxially textured MgO buffer layer was deposited on nontextured metal substrates by inclined substrate deposition (ISD) at a high deposition rate of 120-200 nm/min. Biaxially aligned YBa[sub 2]Cu[sub 3]O[sub 7-x] (YBCO) films were subsequently deposited on these substrates by pulsed laser...

  • Laser deposition of CdS/Y-Ba-Cu-O heterostructures. Shi, L.; Hashishin, Y.; Dong, S.Y.; Zheng, J.P.; Kwok, H.S. // Applied Physics Letters;9/9/1991, Vol. 59 Issue 11, p1377 

    Examines the use of pulsed laser deposition to grow high-quality Y-Ba-Cu-O (YBCO) and CdS thin films sequentially on MgO. Suitability of a temperature window for CdS deposition on YBCO; Transition temperature of the heterostructure; Determination of the degradation.

  • In situ pulsed laser deposition of superconducting Ba[sub 1-x]K[sub x]BiO[sub 3] thin films. Moon, B.M.; Platt, C.E.; Schweinfurth, R.A.; Van Harlingen, D.J. // Applied Physics Letters;10/7/1991, Vol. 59 Issue 15, p1905 

    Investigates in situ pulsed laser deposition of superconducting Ba[sub 1-x]K[sub x]BiO[sub 3] thin films. Determination of the onset transition temperature and zero resistance temperature; Direction of film growth; Characterization of the thin films.

  • In situ all-laser process for deposition of Y[sub 1]Ba[sub 2]Cu[sub 3]O[sub 7-delta] film on.... Ogale, S.B.; Koinkar, V.N.; Viswanathan, R.; Roy, S.D.; Kanetkar, S.M. // Applied Physics Letters;10/7/1991, Vol. 59 Issue 15, p1908 

    Presents an in situ all-laser process for deposition of Y[sub 1]Ba[sub 2]Cu[sub 3]O[sub 7] films. Exhibition of metallic nature of the resistance versus temperature data; Use of yttrium-zirconium dioxide-silver composite film as a barrier layer.

  • Properties of epitaxial SrRuO[sub 3] thin films. Wu, X.D.; Foltyn, S.R.; Dye, R.C.; Coulter, Y.; Muenchausen, R.E. // Applied Physics Letters;5/10/1993, Vol. 62 Issue 19, p2434 

    Investigates the electrical and structural properties of epitaxial SrRuO[sub 3] thin films. Use of pulsed laser deposition method; Orientation of the thin film to the substrate surface; Display of metallic behavior with a room temperature resistivity; Compatibility with high temperature...

  • Interface effects on YBa[sub 2]Cu[sub 3]O[sub 7-delta] ultrathin film growth monitored by in.... Shen, W.P.; Lehane, C.; Zheng, J.P.; Kwok, H.S. // Applied Physics Letters;6/6/1994, Vol. 64 Issue 23, p3175 

    Examines the growth dynamics of pulsed laser deposition ultrathin YBa[sub 2]Cu[sub 3]O[sub 7-thickness] films using in situ resistance measurement technique. Presence of interface region before onset of uniform growth; Use of misfit strain relaxation and island growth mechanism for...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics