P-type CdSe grown by molecular beam epitaxy using a nitrogen plasma source

Ohtsuka, Takeo; Kawamata, Junji; Ziqiang Zhu; Yao, Takafumi
July 1994
Applied Physics Letters;7/25/1994, Vol. 65 Issue 4, p466
Academic Journal
Use of grown p-CdSe layers with zinc blende structure by molecular beam epitaxy as an Ohmic contact for p-zinc selenide. Use of a nitrogen plasma source; Electrical and optical characterization of the epilayers; Effectiveness of the structure as an Ohmic contact.


Related Articles

  • Improvement of ohmic contacts on GaAs with in situ cleaning. Ren, F.; Emerson, A.B.; Pearton, S.J.; Fullowan, T.R.; Brown, J.M. // Applied Physics Letters;3/11/1991, Vol. 58 Issue 10, p1030 

    Studies an in situ argon ion mill clean step prior to ohmic metal deposition developed to improve the uniformity of contact parameters and reduce the contact resistance. Native oxide regrowth of molecular beam epitaxy grown gallium arsenide and AlGaAs layers in vacuum chambers after ion mill...

  • Very low resistance nonalloyed ohmic contacts using low-temperature molecular beam epitaxy of GaAs. Patkar, M.P.; Chin, T.P. // Applied Physics Letters;3/13/1995, Vol. 66 Issue 11, p1412 

    Explores very low resistance ohmic contacts using low-temperature molecular beam epitaxy of gallium arsenide films. Improvement of film stability; Protection of high space charge density layer on the surface; Result of heavy beryllium doping.

  • Low-resistance nonalloyed ohmic contacts to Si-doped molecular beam epitaxial GaAs. Kirchner, P. D.; Jackson, T. N.; Pettit, G. D.; Woodall, J. M. // Applied Physics Letters;7/1/1985, Vol. 47 Issue 1, p26 

    We have found evidence that the surface depletion charge density in molecular beam epitaxial n-GaAs doped heavily with Si approaches the Si concentration. In situ metallization of the as-grown surface of GaAs uniformly doped with Si at 1×1020 cm-3 yields a specific contact resistivity of 1.3...

  • Delta-doped ohmic contacts to n-GaAs. Schubert, E. F.; Cunningham, J. E.; Tsang, W. T.; Chiu, T. H. // Applied Physics Letters;8/4/1986, Vol. 49 Issue 5, p292 

    A new type of nonalloyed ohmic contact to GaAs is realized by molecular beam epitaxy. The ohmic characteristic of the metal-semiconductor junction is obtained by placing a highly δ-doped donor layer a few lattice constants away from the metal-semiconductor interface of the contact and thus...

  • Use of InN for Ohmic contacts on GaAs/AlGaAs heterojunction bipolar transistors. Ren, F.; Abernathy, C.R. // Applied Physics Letters;3/20/1995, Vol. 66 Issue 12, p1503 

    Examines the use of InN grown by metalorganic molecular beam epitaxy for Ohmic contacts on GaAs/AlGaAs heterojunction bipolar transistors. Samples grown in an Intervac Gen II gas-source system on GaAs substrates; Demonstration of the total resistance of abrupt and graded contact structures as a...

  • Low resistance ohmic contact for p-type ZnTe using Au electrode. Ohtsuka, Takeo; Yoshimura, Masashi // Applied Physics Letters;8/28/1995, Vol. 67 Issue 9, p1277 

    Examines the low resistive gold (Au) ohmic contact for nitrogen doped p-type zinc telluride (ZnTe) layer with high thermal stability. Growth of ZnTe by molecular beam epitaxy; Treatment of the ZnTe surface with oxygen plasma; Dependence of contact resistance on annealing temperature; Value of...

  • Contact resistances of NiGeAu, PdGeTiPt, and TiPd ohmic contacts to GaAs and their temperature dependence from 4.2 to 350 K. Jones, K. A.; Linfield, E. H.; Frost, J. E. F. // Applied Physics Letters;12/30/1996, Vol. 69 Issue 27, p4197 

    The specific contact resistance (rc) of NiGeAu and PdGeTiPt ohmic contacts to n-GaAs and TiPd and PdGeTiPt ohmic contacts to p+-GaAs were determined as a function of temperature between 4.2 and 350 K. The low rc obtained for some of the contacts at 4.2 K implies that much of the total contact...

  • Nonalloyed ohmic contact to n-GaAs with GaS/GaAs quasi-metal-insulator-semiconductor structure. Okamoto, Naoya; Takahashi, Tsuyoshi; Tanaka, Hitoshi // Applied Physics Letters;8/10/1998, Vol. 73 Issue 6, p794 

    We report on nonalloyed ohmic contact to n[sup +]-GaAs (approx. 2×10[sup 18] cm[sup -3]) with a Ti-based metal/ultrathin GaS (approx. 15 nm)/GaAs quasi-metal-insulator-semiconductor (QMIS) structure. The GaS film was grown by molecular beam epitaxy employing the precursor,...

  • Microgun-pumped blue lasers. Herve, D.; Accomo, R. // Applied Physics Letters;10/9/1995, Vol. 67 Issue 15, p2144 

    Investigates the operation of microgun-pump blue laser without doping and ohmic contact fabrication. Growth of substrates by molecular beam epitaxy; Information on lasing thresholds; Role of temperature and wavelength on the lifetime of the device.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics