Lowering of the conduction threshold by carbon fiber formation in KrF excimer laser irradiated

Ball, Z.; Sauerbrey, R.
July 1994
Applied Physics Letters;7/25/1994, Vol. 65 Issue 4, p391
Academic Journal
Reports the carbon fiber formation in krypton fluoride excimer laser irradiated polyimide to lower the conduction threshold. General perspectives of excimer laser processing; Induction of electrical conductivity in the polyimide; Illustration of an optical micrograph of a typical fiber.


Related Articles

  • Excimer laser etching of polyimide. Brannon, J. H.; Lankard, J. R.; Baise, A. I.; Burns, F.; Kaufman, J. // Journal of Applied Physics;9/1/1985, Vol. 58 Issue 5, p2036 

    Focuses on a study which investigated the laser induced etch depth for polyimide in air as a function of incident laser fluence and excimer wavelenght. Information on excimer radiation; Methodology of the study; Results and discussion.

  • Quantification of polymide carbonization after laser ablation. Raimondi, F.; Abolhassani, S.; Brütsch, R.; Geiger, F.; Lippert, T.; Wambach, J.; Wei, J.; Wokaun, A. // Journal of Applied Physics;9/15/2000, Vol. 88 Issue 6, p3659 

    Reports that polyimide was irradiated with a XeCl excimer laser. Study of the ablated area and its surrounding by transmission electron microscopy and confocal Raman microscopy; Morphological features; Raman-microscopy characterization of the area surrounding the ablation crater;...

  • Enhancements in the output energy of a KrF oscillator. McCown, A. W.; Godard, J. A. B. // Journal of Applied Physics;9/15/1988, Vol. 64 Issue 6, p2879 

    Presents a study that examined the enhancements in the output energy of a krypton fluoride excimer laser. Methodology; Effect of injected energy and input beam polarization on the output energy enhancements; Correlation between the wavelength and the observed effect of injected energy and input...

  • Development and origin of conical structures on XeCl laser ablated polyimide. Dyer, P. E.; Jenkins, S. D.; Sidhu, J. // Applied Physics Letters;8/25/1986, Vol. 49 Issue 8, p453 

    Stable, well-defined conical structures have been observed to develop on the surface of excimer laser etched polyimide. Deliberate seeding shows that these are induced by the shielding effect of particulate impurities and indicates means for controlling the surface microstructure.

  • Structural-modification mechanism for polyimide-doped poly(tetrafluoroethylene) at subthreshold fluences using 248 nm radiation. Davis, C. R.; Snyder, R. W.; Egitto, F. D.; D’Couto, G. C.; Babu, S. V. // Journal of Applied Physics;9/1/1994, Vol. 76 Issue 5, p3049 

    Discusses a study which evaluated the surface and bulk chemical changes to blends exposed to subthreshold excimer laser fluences. Structural-modification mechanism for polyimide-doped poly(tetrafluoroethylene) at subthreshold fluences using 248 nanometer radiation; Details of the experiment;...

  • Formation of carbon fibers by laser ablation of graphite. Sharma, A. // Applied Physics Letters;10/26/1992, Vol. 61 Issue 17, p2114 

    Examines the technique for the formation of carbon fibers by graphite excimer laser ablation. Growth of the carbon fibers in electrodes; Consideration of the fiber optical and scanning micrographs; Characteristics of the carbon fibers; Formation of metal hydride and oxide filaments.

  • Velocity measurements in polyetheretherketone-carbon fiber composite using excimer laser.... Ablett, S.J.; Dyer, P.E.; Tait, B.L.; Barnes, J.A. // Applied Physics Letters;12/16/1991, Vol. 59 Issue 25, p3236 

    Presents the acoustic velocity measurements on uniaxial polyetheretherketone-carbon fiber composite using excimer laser generated ultrasound. Ultrasound generation using laser-based techniques; Measurements of plane wave velocities on thin single laminae; Propagation of velocities at various...

  • ArF laser excited in a capacitively coupled discharge tube. de la Rosa, J.; Eichler, H. J.; Herweg, H. // Journal of Applied Physics;8/1/1988, Vol. 64 Issue 3, p1598 

    Presents a study which obtained lasing in argon fluoride laser using a longitudinal capacitively coupled high-voltage discharge. Wavelength of the laser energy obtained; Information on excimer lasers with capillary discharge excitation; Experimental set-up for the argon fluoride laser.

  • Vacuum ultraviolet generation by anti-Stokes Raman scattering of KrF laser radiation in H2. Huo, Yunsheng; Shimizu, Kouki; Yagi, Takashi // Journal of Applied Physics;10/15/1992, Vol. 72 Issue 8, p3258 

    Presents a study which determined the eleventh anti-Stokes order at 116 nm of the krypton fluoride excimer laser radiation in hydrogen gas at room temperature. Effects of the depletion of the first Stokes order on the efficient vacuum ultraviolet anti-Stokes generation; Increase in conversion...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics