High T[sub c] superconductor bolometer with record performance

Brasunas, J.C.; Lakew, B.
February 1994
Applied Physics Letters;2/7/1994, Vol. 64 Issue 6, p777
Academic Journal
Examines the use of sapphire substrates to make YBa[sub 2]Cu[sub 3]O[sub 7-x] thin film bolometer. Use of transition-edge bolometer for signal-to-noise application; Development of superconductor bolometer on silicon substrates; Achievement of detectivity for supeconducting bolometer.


Related Articles

  • Use of Zn doping for tuning of the operating temperature of a bolometer based on the high.... Ogale, S.B.; Vedawyas, M.; Bendre, G.S.T.; Kanetkar, S.M. // Applied Physics Letters;10/26/1992, Vol. 61 Issue 17, p2105 

    Examines the fabrication of a microbridge type of bolometer configuration using zinc doped Y[sub 1]Ba[sub 2]Cu[sub 3]O[sub 7-delta] superconducting thin films. Synthesis of the thin film target pellets; Deposition of thin films on (100) Y-ZrO[sub 2] substrates; Stability of the bolometer in the...

  • A detachable semiconductor bolometer for heat pulses. Shen, Y.; Boragno, C.; Buatier de Mongeot, F.; Valbusa, U. // Review of Scientific Instruments;Jul1992, Vol. 63 Issue 7, p3791 

    A semiconductor detachable bolometer using a superconducting thin film as coupling medium is described. The film acts as a low pass band filter for the phonons having a frequency below the superconductive gap. A comparison between different coupling media is reported.

  • Feasibility of a high-temperature bolometer based on Bi2Sr2CaCu2O8+x superconducting films. Bottiglione, A.; Epifani, M.; Balestrino, G.; Milani, E.; Montuori, M.; Maritato, L.; Ruosi, A.; Scafuro, R. // Journal of Applied Physics;7/1/1993, Vol. 74 Issue 1, p704 

    Presents a study that discussed the design of a high-temperature bolometer with large area that uses the resistive transition of a Bi[sub2]Sr[sub2]CaCu[sub2]O[sub8+x] superconducting thin film as a sensitive thermometer. Use of measurements of the excess noise voltage for different values of...

  • Terahertz Spectroscopy with a Josephson Oscillator and a SINIS Bolometer. Tarasov, M.; Kuz'min, L.; Stepantsov, E.; Agulo, I.; Kalabukhov, A.; Fominskii, M.; Ivanov, Z.; Claeson, T. // JETP Letters;3/25/2004, Vol. 79 Issue 6, p298 

    The voltage response of a thin-film normal-metal hot-electron bolometer based on a SINIS (superconductor�insulator�normal metal�insulator�superconductor) structure to the radiation of a high-temperature Josephson junction in the terahertz frequency region was measured....

  • 9.6 mum wavelength mixing in a patterned YBa[sub 2]Cu[sub 3]O[sub 7-delta] thin film. Trifonov, V.A.; Karasik, B.S. // Applied Physics Letters;3/4/1996, Vol. 68 Issue 10, p1418 

    Demonstrates wavelength mixing in high quality YBa[sub 2]Cu[sub 3]O[sub 7-delta] (YBCO) thin film. Deposition of YBCO film on LaAlO[sub 3]; Absence of Josephson mixing mechanism in film; Examination of the hot-electron bolometric mixer in transmission line.

  • Modeling and optimization of high-Tc superconducting bolometers: The effect of film thickness. Neff, H. // Journal of Applied Physics;6/15/1991, Vol. 69 Issue 12, p8375 

    Focuses on a study which modeled the performance of thin film, YBa[sub2]Cu[sub3]O[sub7-x]-based, transition edge bolometers at high and moderate degrees of thermal isolation. Details of the model; Effect of resistance noise properties of the film; Importance of film thickness.

  • Feasibility of infrared imaging arrays using high-Tc superconducting bolometers. Verghese, S.; Richards, P. L.; Char, K.; Fork, D. K.; Geballe, T. H. // Journal of Applied Physics;3/15/1992, Vol. 71 Issue 6, p2491 

    Discusses the design of high-T[subc] superconducting bolometers for applications such as infrared imaging arrays. Dependence of bolometer sensitivity on excess voltage noise in the thermometer; Measurements of the voltage noise in thin films; Description of a readout scheme for two-dimensional...

  • Self-biased dielectric bolometer from epitaxially grown Pb(Zr,Ti)O[sub 3] and lanthanum-doped Pb(Zr,Ti)O[sub 3] multilayered thin films. Liu, Weiguo; Weiguo Liu; Jiang, Bin; Bin Jiang; Zhu, Weiguang; Weiguang Zhu // Applied Physics Letters;8/14/2000, Vol. 77 Issue 7 

    A self-biased dielectric bolometer has been realized by epitaxially grown lead zirconate titanate Pb[sub 1.1](Zr[sub 0.3]Ti[sub 0.7])O[sub 3] (PZT 30/70) and lanthanum-doped lead zirconate titanate Pb[sub 0.83]La[sub 0.17](Zr[sub 0.3]Ti[sub 0.7])[sub 0.9575]O[sub 3] (PLZT 17/30/70) multilayered...

  • The Diagnostics of Thermal Kinetic Coefficients for the Optimization of Film Bolometer Properties. Medvedev, Yu. V.; Nikolaenko, Yu. M.; Grishin, A. M.; Khartsev, S. I. // Technical Physics;Jan2002, Vol. 47 Issue 1, p114 

    A pulsed microwave technique for the fast and accurate diagnostics of a complete set of thermal kinetic coefficients in single-layer film structures is developed. The technique is tested on La[sub 0.7](Pb[sub 0.7]Sr[sub 0.3])[sub 0.3]MnO[sub 3] films on LaA103 and SrTiO[sub 3]...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics