Hard amorphous carbon coatings on soft epitaxial fullerite films by fullerene beam deposition

Busmann, H.-G.; Gaber, H.; Strasser, H.; Hertel, I.V.
January 1994
Applied Physics Letters;1/3/1994, Vol. 64 Issue 1, p43
Academic Journal
Examines the hard amorphous carbon coatings on soft epitaxial fullerite thin films by fullerene beam deposition. Use of the energy cluster impact technique in film coating; Formation of the amorphous carbon; Attainment of diffraction patterns with a transmission electron microscope.


Related Articles

  • High-resolution microbeam x-ray diffractometry applied to InGaAsP/InP layers grown by narrow-stripe selective metal-organic vapor phase epitaxy. Kimura, Shigeru; Kimura, Hidekazu; Kobayashi, Kenji; Oohira, Tomoaki; Izumi, Koich; Sakata, Yasutaka; Tsusaka, Yoshiyuki; Yokoyama, Kazushi; Takeda, Shingo; Urakawa, Masafumi; Kagoshima, Yasushi; Matsui, Junji // Applied Physics Letters;8/28/2000, Vol. 77 Issue 9 

    We measure the diffraction peaks of InGaAsP selective metal-organic vapor-phase epitaxial layers on 1.7-μm-wide InP stripe regions between a pair of SiO[sub 2] mask stripes. This is achieved by using an x-ray microbeam with low angular divergence and a narrow energy bandwidth that was...

  • Advancement and problems of fullerene-oxygen-iodine laser. Grenishin, A. S.; Kiselev, V. M.; Kislyakov, I. M.; Pavlova, A. L.; Sosnov, E. N. // Optics & Spectroscopy;Jan2010, Vol. 108 Issue 1, p143 

    The methods of improving the efficiency of a fullerene-oxygen-iodine laser are investigated. In the course of this research, we developed new fullerene coatings that possess better mechanical and radiative hardness, as well as higher efficiency of singlet oxygen generation. We show that, by...

  • Enhanced photoelectrochemical activity of vertically aligned ZnO-coated TiO2 nanotubes. Hua Cai; Qin Yang; Zhigao Hu; Zhihua Duan; Qinghu You; Jian Sun; Ning Xu; Jiada Wu // Applied Physics Letters;2/3/2014, Vol. 104 Issue 5, p053114-1 

    Vertically aligned ZnO-TiO2 hetero-nanostructures constructed of anatase TiO2 nanotubes (NTs) and wurtzite ZnO coatings are fabricated by atomic layer deposition of ZnO coatings on electrochemical anodization formed TiO2 NTs, and their photoelectrochemical activities are studied through...

  • Single-crystal structural study of the pressure-temperature-induced dimerization of C ... Moret, R.; Launois, P.; Wågberg, T.; Sundqvist, B.; Agafonov, V.; Davydov, V. A.; Rakhmanina, A. V. // European Physical Journal B -- Condensed Matter;Jan2004, Vol. 37 Issue 1, p25 

    We present a study by Raman spectroscopy and X-ray diffraction/diffuse scattering of C60 single-crystals treated at high-pressure and high-temperature. This allowed us to obtain structural information on the C60 dimer state which can be considered as an intermediate state in the polymerization...

  • Transmission electron microscopy study of microstructure and [1120]//[001] polycrystalline epitaxy of CoNiCr/Cr bilayer films. Tang, Li; Lu, Dong; Thomas, Gareth // Journal of Applied Physics;1/1/1995, Vol. 77 Issue 1, p47 

    Presents a study of microstructure and [1120]//[001] polycrystalline epitaxy of CoNiCr/chromium bilayer films using transmission electron microscopy (TEM). Sample tilt method of studying thin film texture by TEM; Crystallographic characteristics of [001] textured chromium and [1120] textured...

  • Self-formed silicon quantum wires on ultrasmooth sapphire substrates. Yanagiya, Shun-ichi; Kamimura, Shunsuke // Applied Physics Letters;9/8/1997, Vol. 71 Issue 10, p1409 

    Examines the silicon wire growth on ultrasmooth sapphire substrates. Use of the molecular beam epitaxy in the process; Application of x-ray diffractometry to check silicon wire crystallinity; Indication of silicon wire growth with substrate orientation by the diffraction pattern; Determination...

  • Solid source MBE growth of quantum cascade lasers. Feng-Qi Liu; Lu Li; Lijun Wang; Junqi Liu; Wei Zhang; Quande Zhang; Wanfeng Liu; Quanyong Lu; Zhanguo Wang // Applied Physics A: Materials Science & Processing;Nov2009, Vol. 97 Issue 3, p527 

    High material quality is the basis of quantum cascade lasers (QCLs). Here we report the solid source molecular beam epitaxy (MBE) growth details of realizing high quality of InGaAs/InAlAs QCL structures. Accurate control of material compositions, layer thickness, doping profile, and interface...

  • Quantitative determination of the order parameter in epitaxial layers of ZnSnP[sub 2]. Francoeur, S.; Seryogin, G. A.; Seryogin, G.A.; Nikishin, S. A.; Nikishin, S.A.; Temkin, H. // Applied Physics Letters;4/10/2000, Vol. 76 Issue 15 

    X-ray diffraction is applied to determine the degree of order in partially ordered epitaxial layers of ZnSnP[sub 2] grown on GaAs. The Bragg-Williams order parameter, used as a scaling coefficient for the structure factor of superstructure reflections, is extracted from the comparison of...

  • Microstructure, mechanical properties, and high-temperature oxidation resistance of AlN/SiO nanomultilayer coatings. Kong, Ming; Zhao, Wenji; Wu, Ying; Huang, Bilong; Li, Geyang // Journal of Coatings Technology & Research;Mar2012, Vol. 9 Issue 2, p177 

    The microstructure, mechanical properties, and high-temperature oxidation resistance of AlN/SiO nanomultilayer coatings with various SiO layer thicknesses were investigated using X-ray diffractometry, high-resolution transmission electron microscopy, scanning electron microscopy, and...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics