TITLE

Sunlight-style color-temperature tunable organic light-emitting diode

AUTHOR(S)
Jwo-Huei Jou; Ming-Hsuan Wu; Shih-Ming Shen; Hsi-Ching Wang; Sun-Zen Chen; Szu-Hao Chen; Chuen-Ren Lin; Yueh-Lin Hsieh
PUB. DATE
July 2009
SOURCE
Applied Physics Letters;7/6/2009, Vol. 95 Issue 1, p013307
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
We demonstrate a man-made lighting device of organic light-emitting diode (OLED) capable of yielding a sunlight-style illumination with various daylight chromaticities, whose color temperature ranges between 2300 and 8200 K, fully covering those of the entire daylight at different times and regions. The OLED employs a device architecture capable of simultaneously generating all the emissions required to form a series of daylight chromaticities. The wide color-temperature span may be attributed to that the recombination core therein can easily be shifted along the different emissive zones simply by varying the applied voltage via the use of a thin carrier-modulating layer.
ACCESSION #
43158407

 

Related Articles

  • Temperature dependence of polarized electroluminescence side emission from (0001)-oriented blue and violet InGaN/GaN light-emitting diodes. Du, Xiaozhang; Lu, Hai; Han, Ping; Zhang, Rong; Zheng, Youdou // Applied Physics Letters;5/19/2008, Vol. 92 Issue 20, p203504 

    Temperature dependent polarized electroluminescence from (0001)-oriented blue and violet InGaN/GaN multiple-quantum-well (MQW) light-emitting diodes (LEDs) has been investigated. The viewing angle dependent light emission is found to be highly polarized perpendicular to the electrical field in...

  • Efficiency droop in 245–247 nm AlGaN light-emitting diodes with continuous wave 2 mW output power. Sun, W.; Shatalov, M.; Deng, J.; Hu, X.; Yang, J.; Lunev, A.; Bilenko, Y.; Shur, M.; Gaska, R. // Applied Physics Letters;2/8/2010, Vol. 96 Issue 6, p061102 

    We report on 245–247 nm AlGaN-based deep ultraviolet (DUV) light-emitting diodes with continuous wave output power up to 2 mW. DUV diodes with peak emission wavelength of 245 and 247 nm exhibit turn-on voltage less than 10 V. At room temperature and cw operation the maximum external...

  • Diagnose LEDs by monitoring the switch-mode duty cycle. Janssen, Fons // EDN Europe;May2009, Vol. 56 Issue 5, p28 

    The article focuses on the different methods to monitor the forward voltage of high-brightness light-emitting diodes (HB LEDs). As stated, any changes in forward voltage can affect LEDs' connectivity and measurement. As suggested, the differential high-voltage measurement can be avoided with the...

  • Highly efficient white organic light-emitting diodes using two emitting materials for three primary colors (red, green, and blue). Seo, Ji Hoon; Seo, Ji Hyun; Park, Jung Hyun; Kim, Young Kwan; Kim, Jun Ho; Hyung, Gun Woo; Lee, Kum Hee; Yoon, Seung Soo // Applied Physics Letters;5/14/2007, Vol. 90 Issue 20, p203507 

    The authors have demonstrated highly efficient white organic light-emitting diodes (WOLEDs) by using two emissive materials as a dopant, 1,4-bis[2-(7-N-diphenyamino-2-(9,9-diethyl-9H-fluoren-2-yl)) vinyl] benzene (DAF-ph) and iridium(III) bis(5-acetyl-2-phenylpyridinato-N,C2′)...

  • Recombination Currents in Light-Emitting Diodes based on (AlGa)InP/(AlGa)InP Multiple Quantum Wells. Prudaev, I.; Skakunov, M.; Lelekov, М.; Ryaboshtan, Yu.; Gorlachuk, P.; Marmalyuk, А. // Russian Physics Journal;Dec2013, Vol. 56 Issue 8, p898 

    The results of experimental studies of the effect of temperature on the forward current-voltage characteristics of light-emitting diodes (LEDs) with an active region consisting of multiple (AlGa)InP/(AlGa)InP quantum wells are reported. It is shown that several regions can be identified in the...

  • Measurement of Temperature Resistance of High power LED. Wang Xiaozeng // Applied Mechanics & Materials;2014, Vol. 701/702, p510 

    In the absence of cooling measures, the chip temperature of high power LED rises rapidly. When the junction temperature exceeds the maximum allowable temperature, the high power LED will be damaged due to overheating. In the design of high power LED lamps, the main work is to the temperature...

  • 3 Things You Should Know Before Installing LED Lighting. Muncrief, Jessica // Ventanas;Summer2012, Vol. 3 Issue 2, p41 

    The article shares tips for installing light emitting diode (LED) lighting systems including checking the maximum voltage, discussing in-line surge protection with the contractor, and being pro-active during an outage.

  • Room-temperature ultraviolet emission from an organic light-emitting diode. Qiu, C. F.; Wang, L. D.; Chen, H. Y.; Wong, M.; Kwok, H. S. // Applied Physics Letters;10/1/2001, Vol. 79 Issue 14, p2276 

    Ultraviolet emission was obtained from N,N[sup ′]-diphenyl-N,N[sup ′]-bis(3-methylphenyl)-(1,1[sup ′]-biphenyl)-4,4[sup ′]-diamine. Gallium nitride was used as a hole-blocking layer to contain the holes. A peak emission wavelength of 400 nm was measured. The external...

  • Light-emitting diodes of “Warm” white luminescence on the basis of p- n heterostructures of the InGaN/AlGaN/GaN type coated with phosphors made of yttrium-gadolinium garnets. Soshchin, N. P.; Galchina, N. A.; Kogan, L. M.; Shirokov, S. S.; Yunovich, A. E. // Semiconductors;May2009, Vol. 43 Issue 5, p672 

    Electroluminescence spectra and color characteristics of light-emitting diodes of white luminescence based on p- n heterostructures of the InGaN/AlGaN/GaN type with blue emission (λmax ≈ 455 nm) coated with phosphors of the type of aluminum-yttrium-gadolinium garnets activated with the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics