TITLE

A calibration method of a radio frequency magnetic probe

AUTHOR(S)
Yang, J.G.; Choi, J.H.; Kim, B.C.; Yoon, N.S.; Hwang, S.M.
PUB. DATE
September 1999
SOURCE
Review of Scientific Instruments;Sep99, Vol. 70 Issue 9, p3774
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Demonstrates a simple calibration method of a radio frequency magnetic probe by utilizing a two port network analysis method. Measurement of the scattering parameters; Calculation of the magnetic field generated by the Helmholtz coil; Determination of probe sensitivity.
ACCESSION #
4295875

 

Related Articles

  • Tracking Advances In Probing Mixed-Mode RF Circuitry. Dangremond, Larry // Microwaves & RF;Jan2008, Vol. 47 Issue 1, p86 

    The article attempts to show some of the issues unique to four-port probe-based measurements in mixed-mode radio frequency (RF) circuitry. These include lack of a probe-centric RF system calibration, lack of appropriate and well-designed precision probe calibration standards, and inaccuracies...

  • Magnetic field probes for time-domain monitoring of RF exposure within tissue-mimicking materials for MRI-compatible medical device testing. Attaran, Ali; Handler, William B.; Menon, Ravi S.; Chronik, Blaine A. // Electronics Letters;1/11/2018, Vol. 54 Issue 1, p16 

    A new RF B/H field probe for time-domain monitoring of RF electromagnetic-radiated exposure during medical device testing inside the lossy tissue-mimicking material is presented. The probe was tuned and matched for a centre frequency of 127.6 MHz to optimise the response for testing within...

  • Calibration of magnetic probes in the vicinity of a conducting well. Howard, S. J.; Horton, R. D.; Hwang, D. Q.; Evans, R. W.; Brockington, S. J. // Review of Scientific Instruments;Feb2008, Vol. 79 Issue 2, p023503 

    Measuring magnetic fields near the edge of a plasma device can be complicated by the geometric effects of the ports through which such measurements are made. The primary effect is an attenuation of the magnetic field at the probe coil due to the field expanding into the finite sized conducting...

  • Scanning Hall probe microscopy with shear force distance control. Schweinbo¬®ck, Thomas; Weiss, Dieter; Lipinski, Martin; Eberl, Karl // Journal of Applied Physics;5/1/2000, Vol. 87 Issue 9, p6496 

    We describe a new type of scanning Hall probe microscope operating at room temperature for quantitative and noninvasive measurements of magnetic stray fields. The probe-sample distance is controlled by piezoelectrical detection of the shear forces acting on an oscillating cantilever. The Hall...

  • Time-domain magnetic field waveform measurement near printed circuit boards. Harada, Takashi; Sasaki, Hideki; Hankui, Eiji // Electrical Engineering in Japan;12/1/1998, Vol. 125 Issue 4, p9 

    This paper describes a time domain magnetic field measurement process for measuring magnetic fields near printed circuit boards (PCBs) with a loop probe. In carrying out these measurements, the loop probe needs to be calibrated in the frequency domain. In this process, a microstrip line with a...

  • Market Profile: NMR Probes.  // Spectroscopy;Mar2011, Vol. 26 Issue 3, p14 

    The article offers information about the nuclear magnetic resonance (NMR) probe. It is where all action within an NMR system happens. The probe integrates radio frequency coils for use in magnetic field strengths and detect specific nuclei. Its wide range of types include microprobes, capillary...

  • High accuracy magnetic field measurements with a Hall probe. Schott, C.; Popovic, R.S.; Alberti, S.; Tran, M.Q. // Review of Scientific Instruments;Jun99, Vol. 70 Issue 6, p2703 

    Describes a silicon-based temperature stabilized axial Hall probe with an absolute accuracy of +/-40 ppm in the range from 0 to 6 T. Hall probe configuration; Magnetic field configuration; Calibration procedure.

  • Fast reciprocating probe system for local scrape-off layer measurements in front of the lower... Asakura, N.; Tsuji-lio, S.; Ikeda, Y.; Neyatani, Y.; Seki, M. // Review of Scientific Instruments;Dec1995, Vol. 66 Issue 12, p5428 

    Investigates an improved coupling mechanism of the radio frequency wave to the core plasma. Incorporation of a fast reciprocating probe system with a long drive shaft into a multi-junction lower hybrid wave launcher; Use of a compact pneumatic cylinder and springs in the operation of the probe.

  • Contactless vector network analysis using diversity calibration with capacitive and inductive coupled probes. Zelder, T.; Rolfes, I.; Eul, H. // Advances in Radio Science;2007, Vol. 5, p19 

    Contactless vector network analysis based on a diversity calibration is investigated for the measurement of embedded devices in planar circuits. Conventional contactless measurement systems based on two probes for each measurement port have the disadvantage that the signal-to-noise system...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics