Thermal noise in biomagnetic measurements

Nenonen, Jukka; Montonen, Juha; Katila, Toiro
June 1996
Review of Scientific Instruments;Jun96, Vol. 67 Issue 6, p2397
Academic Journal
Focuses on thermal magnetic noise fields generated by slabs with high electrical conductivity of high magnetic permeability. Spectral densities and spatial correlations of magnetic field fluctuations; Estimation of thermal noise fields in the walls of a magnetically shielded room.


Related Articles

  • BabySQUID: A mobile, high-resolution multichannel magnetoencephalography system for neonatal brain assessment. Okada, Yoshio; Pratt, Kevin; Atwood, Christopher; Mascarenas, Anthony; Reineman, Richard; Nurminen, Jussi; Paulson, Douglas // Review of Scientific Instruments;Feb2006, Vol. 77 Issue 2, p024301 

    We developed a prototype of a mobile, high-resolution, multichannel magnetoencephalography (MEG) system, called babySQUID, for assessing brain functions in newborns and infants. Unlike electroencephalography, MEG signals are not distorted by the scalp or the fontanels and sutures in the skull....

  • Simple active method for reducing magnetic interference in a thermoelectrically cooled photomultiplier tube. Kärhä, Petri; Jaakkola, Teemu // Review of Scientific Instruments;Apr2008, Vol. 79 Issue 4, p043102 

    We present a simple modification for thermoelectrically cooled photomultiplier tube (PMT) assemblies that eliminates the magnetic interference between the peltier element and the PMT. An active compensation is accomplished by forming current loops of the wires of the peltier element and placing...

  • Resistive wall mode identification by contrast enhancing technique of soft x-ray measurements on DIII-D. Bogatu, Ioan N.; Edgell, Dana H.; Kim, Jin-Soo // Review of Scientific Instruments;Sep2004, Vol. 75 Issue 9, p2832 

    A contrast enhancing technique (CET) for soft x-ray (SXR) measurements has been developed and tested for the early identification of the low amplitude resistive wall mode (RWM) on the DIII-D tokamak. The technique is simple and fast. It utilizes the chord-by-chord difference of low-pass...

  • A ceramic-type diamond anvil cell for optical measurements at high pressure in pulsed high magnetic fields. Yamamoto, K.; Endo, S.; Yamagishi, A.; Mikami, H.; Hori, H.; Date, M. // Review of Scientific Instruments;Dec1991, Vol. 62 Issue 12, p2988 

    A diamond anvil cell made of stabilized zirconia ceramic for high-pressure experiments under a pulsed high magnetic field is described. As an application, the magneto-optical spectra of ruby have been obtained at 77 K up to 7 GPa and 33 T, showing the Zeeman splitting of the fluorescent lines,...

  • Active low frequency vertical vibration isolation. Hensley, Joel M.; Peters, Achim; Chu, Steven // Review of Scientific Instruments;Jun99, Vol. 70 Issue 6, p2735 

    Describes the construction of a system that isolates a key element of an experimental setup from vertical motions of the ground and the surrounding apparatus. Theory; Mechanical system; Electronic feedback; Alignment.

  • Three-in-one functionality. whitel // MWP (Online Edition);10/ 4/2012, p207 

    The article evaluates Talyrond 500 instruments for roundness, form and surface finish measurements.

  • Feasibility and applicability of integrated metrology using spectroscopic ellipsometry in a cluster tool. Piel, J. Ph.; Boher, P.; Stehle´, J. L.; Pickering, C. // AIP Conference Proceedings;2001, Vol. 550 Issue 1, p538 

    For any industrial integrated metrology application three key issues must be addressed - feasibility, applicability and cost-effectiveness. This paper reports progress on the integration of spectroscopic ellipsometry (SE) in the cool-down chamber. SE is capable of providing rapid information on...

  • A newly developed low drift fast response salinity meter. Bidokhti, A. A.; Bidokhti, A.A.; Peacock, A. // Review of Scientific Instruments;Sep2000, Vol. 71 Issue 9 

    Here a new conductivity probe, which is basically a stainless steel tube with a plastic plug with a hole, plugged in one end, is described. The tube is externally insulated and the other electrode is (usually earthed) a metallic slab fixed in the fluid. The electronic used is of a conventional...

  • Instrument for the in situ measurement of haze in aircraft windscreens. Gallagher III, Frank W.; Brock, Fred V. // Review of Scientific Instruments;Jun96, Vol. 67 Issue 6, p2083 

    Reports on the development of a prototype instrument that measures haze in aircraft windscreens. Elimination of ambient light and compensation for the remaining illumination; Need for precise orientation of the collimator and the integrating sphere.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics