TITLE

A circular arc bending model of piezoelectric tube scanners

AUTHOR(S)
Wei, Cao; Honghai Zhang; Lu Tao; Wenju Li; Hanmin Shi
PUB. DATE
June 1996
SOURCE
Review of Scientific Instruments;Jun96, Vol. 67 Issue 6, p2286
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Reports on the influence of the tip length mounted on a tube upon the transverse scanning based on a circular arc scanning model of piezoelectric tubes. Relation between the vertical and transverse displacement of the tip; Three-dimensional features of a piezoelectric tube scanner.
ACCESSION #
4295438

 

Related Articles

  • A six-degree-of-freedom precision motion stage. Seugling, Richard M.; LeBrun, Thomas; Smith, Stuart T.; Howard, Lowell P. // Review of Scientific Instruments;Jun2002, Vol. 73 Issue 6, p2462 

    This article presents the design and performance evaluation of a six-degree-of-freedom piezoelectrically actuated fine motion stage that will be used for three dimensional error compensation of a long-range translation mechanism. Development of a single element, piezoelectric linear displacement...

  • Production of dry powder clots using a piezoelectric drop generator. Yashchuk, Valeriy V.; Sushkov, Alexander O.; Budker, Dmitry; Lee, Eric R.; Lee, Irwin T.; Perl, Martin L. // Review of Scientific Instruments;Jun2002, Vol. 73 Issue 6, p2331 

    We have demonstrated that piezoelectrically driven, squeeze mode, tubular reservoir liquid drop generation, originally developed as a "drop-on-demand" method for ejection of microdrops of liquids or suspensions, can successfully operate with dry powder. Spherical silver powder with maximum...

  • Simple piezoelectric translation device. Niedermann, Ph.; Emch, R.; Descouts, P. // Review of Scientific Instruments;Feb1988, Vol. 59 Issue 2, p368 

    We describe a piezoelectric device which allows continuous movement and high-resolution micropositioning, without distance limitation. Both mechanical construction and the electronics for the device are very simple. The movement is obtained via a stick-slip mechanism, and steps as small as 10 nm...

  • A piezoelectric droplet generator for use in wind tunnels. Warnica, W. D.; Van Reenen, M.; Renksizbulut, M.; Strong, A. B. // Review of Scientific Instruments;Dec1991, Vol. 62 Issue 12, p3037 

    This article describes a compact piezoelectric droplet generator. A unique feature of this instrument is the small size of its nozzle assembly which includes a cylindrical piezoelectric ceramic transducer, an interchangeable orifice, a charging ring, and deflection plates. The nozzle assembly is...

  • Simultaneous measurement of spatially separated forces using a dual-cantilever resonance-based touch sensor. Phan, Jack V.; Hocken, Robert; Smith, Stuart T.; Keanini, Russell G. // Review of Scientific Instruments;Feb2002, Vol. 73 Issue 2, p318 

    A simple device for simultaneously measuring two spatially separated contact forces is described. The device uses a monolithic dual-cantilever touch sensor driven by a piezoelectric PZT actuator. A phase-locking method allows measurement of resonant frequency shifts at constant phase, based on...

  • Micropipetting device operating under surface vibration motion of piezoelectric ceramic vibrator. Toda, K.; Matsuyama, K.; Takamori, M. // Review of Scientific Instruments;Sep92, Vol. 63 Issue 9, p4225 

    A micropipetting device incorporating an ultrasonic pump is described, in which vibration motion on the side surface of a cylindrical piezoelectric vibrator plays the key role. A core tube surrounded by three bearings mounted at the central part of the rotor operates essentially for the pump...

  • Compensation method based on formularizing hysteresis of piezoelectric tube scanners. Cao Wei; Honghai Zhang; Lu Tao; Wenji Li; Hanmin Shi // Review of Scientific Instruments;Oct96, Vol. 67 Issue 10, p3594 

    Discusses a three-dimensional scanning model of piezoelectric tubes and its used to compensate distortions of measured images scanned by a piezoelectric tube. Omission of the vertical scanning error induced by transverse scanning of the tip; Relations between the three-dimensional scanning...

  • Piezoelectric push-pull micropositioner for ballistic electron emission microscope Xiaohui Qiu; Chen Wang; Chunli Bai; Guangyi Shang // Review of Scientific Instruments;Oct97, Vol. 68 Issue 10, p3803 

    Details the development of a piezoelectric micropositioner based on the push-pull mechanism. Distinctive features of the piezoelectric micropositioner; Two piezoelectric actuators and three permanent magnet feet comprising the positioner; Application of a very low driving voltage to the...

  • Speed control characteristics and digital servosystem of a circular traveling wave motor. Hatsuzawa, Takeshi; Toyoda, Kouji; Tanimura, Yoshihisa // Review of Scientific Instruments;Nov86, Vol. 57 Issue 11, p2886 

    The rotational speed control characteristics of a circular traveling wave motor are investigated. This motor is an ultrasonic motor driven by a specially designed piezoelectric vibrator. There are various parameters for controlling rotational speed due to the influence of friction and resonance...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics