TITLE

Two port cavity Q measurement using scattering parameters

AUTHOR(S)
Dae-Hyun Han; Young-Soo Kim; Kwon, M.
PUB. DATE
June 1996
SOURCE
Review of Scientific Instruments;Jun96, Vol. 67 Issue 6, p2179
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Describes a method of measuring Q of a two port cavity resonator by scattering parameters. Use of a lumped equivalent circuit model as a function of cavity parameters; Additional information such as the coupled power ratio provided by the two port measurement, which is one of the important parameters for the beam-accelerating cavities.
ACCESSION #
4295422

 

Related Articles

  • Tunable Q-band resonator for low temperature electron paramagnetic resonance/electron nuclear... Sienkiewicz, Andrzej; Smith, Brian G.; Veselov, Andrei; Scholes, Charles P. // Review of Scientific Instruments;Jun96, Vol. 67 Issue 6, p2134 

    Presents a tunable Q-band cavity for performing electron paramagnetic resonance and electron nuclear double resonance experiments at cryogenic temperatures. Description of the resonator; Enhancement of effective modulation and radio frequency fields; Broad frequency range that will compensate...

  • Thermal-wave resonator cavity. Shen, Jun; Mandelis, Andreas // Review of Scientific Instruments;Oct95, Vol. 66 Issue 10, p4999 

    Describes a thermal-wave resonant cavity constructed using a thin aluminum foil wall. Production of fundamental and higher overtone resonant extrema; Effects of scanning the cavity length; Use of the resonator as a high-resolution thermophysical property sensor of gaseous ambients.

  • Novel technique to measure the microwave response of high Tc superconductors between 4.2 and 200 K. Sridhar, S.; Kennedy, W. L. // Review of Scientific Instruments;Apr88, Vol. 59 Issue 4, p531 

    We have devised and implemented a novel technique that has the required sensitivity to enable measurements of the complex surface impedance (Z[sub s]) of high T[sub c] superconducting materials between 4.2 K and at least 200 K. The essential ideal is to employ a superconducting high-Q cavity...

  • Apparatus for measurement of surface resistance versus rf magnetic field of high-Tc superconductors. Delayen, J. R.; Bohn, C. L.; Roche, C. T. // Review of Scientific Instruments;Aug1990, Vol. 61 Issue 8, p2207 

    A coaxial niobium quarter-wave resonant cavity has been fabricated and used for measurement of the surface resistance of disk-shaped samples of high-Tc superconductors at 820 MHz and 4.2 K, and at surface rf magnetic fields ranging to 300 G. The cavity can accommodate samples as large as 36 mm...

  • Influence of intensity loss in the cavity of a folded Fabry-Perot interferometer on interferometric signals. Shyu, Lih-Horng; Chang, Chung-Ping; Wang, Yung-Cheng // Review of Scientific Instruments;Jun2011, Vol. 82 Issue 6, p063103 

    Fabry-Perot interferometer is often used for the micro-displacement, because of its common optical path structure being insensitive to the environmental disturbances. Recently, the folded Fabry-Perot interferometer has been investigated for displacement measurements in large ranges. The...

  • Piezoelectric voltage coupled reentrant cavity resonator. Carvalho, N. C.; Fan, Y.; Le Floch, J.-M.; Tobar, M. E. // Review of Scientific Instruments;2014, Vol. 85 Issue 10, p1 

    A piezoelectric voltage coupled microwave reentrant cavity has been developed. The central cavity post is bonded to a piezoelectric actuator allowing the voltage control of small post displacements over a high dynamic range. We show that such a cavity can be implemented as a voltage tunable...

  • A CdS photoconductivity gas sensor as an analytical tool for detection and analysis of hazardous gases in the environment. Miremadi, Bijan K.; Colbow, Konrad; Harima, Yutaka // Review of Scientific Instruments;Oct97, Vol. 68 Issue 10, p3898 

    Develops a highly sensitive gas sensor for detection and analytical identification of hazardous gases, by depositing partially crystalline powder from an aqueous suspension of CdS powder on an alumina substrate. Sample preparation; Schematic diagram of the apparatus and measuring system;...

  • Projecting two-axis nanometer scale displacement of microscopic beads onto a quadrant photodetector with a laser beam Li, Daqun; Schnapp, Bruce J. // Review of Scientific Instruments;Oct97, Vol. 68 Issue 10, p3920 

    Reports that a quadrant photodetector has been added onto a custom differential interference contrast microscope to measure two-axis displacement of silica beads with a noise below 150 Hz. Incorporation of a diode-pumped solid-state laser to function as an optical trap for motility studies of...

  • 20-l explosibility test chamber for dusts and gases. Cashdollar, Kenneth L.; Hertzberg, Martin // Review of Scientific Instruments;Apr1985, Vol. 56 Issue 4, p596 

    The Bureau of Mines has designed a 20-l test chamber for the explosibility testing of dusts, gases, and their mixtures. It can be used to measure lean and rich limits of flammability, explosion pressures and rates of pressure rise, minimum ignition energies, minimum oxygen concentrations for...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics