Absence of solute drag in solidification

Kittl, J.A.; Aziz, M.J.; Brunco, D.P.; Thompson, M.O.
May 1994
Applied Physics Letters;5/2/1994, Vol. 64 Issue 18, p2359
Academic Journal
Examines the rapid solidification of silicon-arsenic alloys induced by pulsed laser melting (PLM). Absence of solute drag in the solidification process; Technique for measuring temperatures and velocities during PLM and rapid solidification; Use of Rutherford backscattering to determine the partition coefficients.


Related Articles

  • Time dependent interface stability during rapid solidification. Greven, K.; Ludwig, A. // Journal of Applied Physics;10/1/1999, Vol. 86 Issue 7, p3682 

    Presents information on a study which investigated the destabilization of a planar solid/liquid interface during resolidification of the molten surface layer of silicon-tin alloys. Theoretical model; Results and discussion; Summary and conclusions.

  • Lattice location of erbium in high-fluence implanted silicon-germanium: Backscattering/channeling study. Touboltsev, V. S.; Ra¨isa¨nen, J.; Johnson, E.; Johansen, A.; Sarholt, L. // Applied Physics Letters;10/2/2000, Vol. 77 Issue 14 

    High-quality crystalline Si[sub 0.75]Ge[sub 0.25] alloy crystals were implanted with 70 keV Er[sup +] ions at 550 °C to a fluence of 10[sup 19] m[sup -2]. In situ Rutherford backscattering/channeling spectrometry with a 500 keV He[sup 2+] beam revealed Er atoms located on regular lattice...

  • Dendritic Growth in an Aluminum-Silicon Alloy. Kaya, H.; Çadırlı, E.; Gündüz, M. // Journal of Materials Engineering & Performance;Feb2007, Vol. 16 Issue 1, p12 

    Unidirectional solidification experiments have been carried out on an A1-3 wt.% Si alloy as a function of temperature gradient, G and growth rate, V. The samples were solidified under steady-state conditions with a constant growth rate of 8.20 µm/s at different temperature gradients...

  • Structure and temperature dependence of conductivity of Ag2.5Se-Se composite. Vitta, Satish // Journal of Applied Physics;10/1/1990, Vol. 68 Issue 7, p3413 

    Reports on the phenomenon of liquid immiscibility combined with rapid solidification to produce a microstructure in the Ag-53. Preparation of the silicon aloy; Information on electron transport.

  • Time-resolved temperature measurements during rapid solidification of Si-As alloys induced by pulsed-laser melting. Kittl, J. A.; Reitano, R.; Aziz, M. J.; Brunco, D. P.; Thompson, M. O. // Journal of Applied Physics;4/15/1993, Vol. 73 Issue 8, p3725 

    Provides information on a study that examined the solidification of silicon-arsenic alloys induced by pulsed-laser melting at regrowth velocities where the partition coefficient is close to unity. Experimental techniques; Data analysis; Results and discussion on the study; Conclusions.

  • Observation of Misoriented Tertiary Dendrite Arms During Controlled Directional Solidification in Aluminum-7 Wt pct Silicon Alloys. Hoose, J.; Grugel, R.; Tewari, S.; Brush, L.; Erdmann, R.; Poirier, D. // Metallurgical & Materials Transactions. Part A;Dec2012, Vol. 43 Issue 12, p4724 

    Electron backscattered diffraction (EBSD) examination of transverse cross sections from a directionally solidified aluminum-7 wt pct silicon alloy revealed tertiary dendrite arms that appeared in place but in reality had orientations that significantly differed from their parent arm. The maximum...

  • Solid-phase epitaxial regrowth of Sb-implanted Si1-xGex strained layers: Kinetics and electrical properties. Atzmon, Z.; Eizenberg, M.; Shacham-Diamand, Y.; Mayer, J. W.; Schäffler, F. // Journal of Applied Physics;4/15/1994, Vol. 75 Issue 8, p3936 

    Focuses on a study which described the kinetics and electrical properties of solid-phase epitaxial regrown (SPEG) layers of antimony-implanted strained silicon-germanium alloys. Materials and procedure; Results of higher-dose implanted ion backscattering measurements; Information on the...

  • Effect of TiO[sub x] on the formation of titanium silicide layer. El Omari, H.; Boyeaux, J. P.; Errkik, A.; Lemiti, M.; Laugier, A. // Journal of Applied Physics;6/15/2003, Vol. 93 Issue 12, p9803 

    The Al/TiO[SUBx]/Si, Ti/TiO[SUBx]/Si, and Mo/TiO[SUBx]/Si interfaces are studied, before and after thermal treatment, by secondary ion mass spectrometry (SIMS), Rutherford backscattering spectrometry (RBS), x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and scanning electron...

  • Microstructural Properties of Nb-Si Alloys Investigated using EBSD at Large and Small Scale. Drawin, Stefan; Boivin, Denis; Petit, Pierre // Metallurgical & Materials Transactions. Part A;Mar2005, Vol. 36 Issue 3, p497 

    Texture and crystallographic orientation relationships in arc-melted hypoeutectic and hypereutectic binary Nb-Si alloys are investigated. Electron backscattered diffraction (EBSD) is used here in conventional conditions, i.e., at relatively high spatial resolution (<1 �m) for ~400 x 400...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics