Polyaniline as a transparent electrode for polymer light-emitting diodes: Lower operating

Yang, Y.; Heeger, A.J.
March 1994
Applied Physics Letters;3/7/1994, Vol. 64 Issue 10, p1245
Academic Journal
Demonstrates the use of polyaniline (PANI) as a transparent electrode for polymer light-emitting diodes. Application of PANI to improve device performance; Result of using indium/tin oxide (ITO) as the hole-injecting anode; Importance of the ITO layer in the ITO/PANI composite electrode.


Related Articles

  • Emission through one of two metal electrodes of an organic light-emitting diode via surface-plasmon cross coupling. Gifford, Dawn K.; Hall, Dennis G. // Applied Physics Letters;12/2/2002, Vol. 81 Issue 23, p4315 

    We report strong surface emission from an organic light-emitting diode in which the luminescent material resides between two nearly opaque metal electrodes. Experimental and theoretical analyses indicate that cross coupling between surface plasmons on opposite sides of the metal cathode layer...

  • Mechanisms of injection enhancement in organic light-emitting diodes through an Al/LiF electrode. Heil, H.; Steiger, J.; Karg, S.; Gastel, M.; Ortner, H.; von Seggern, H.; Sto¨ßel, M. // Journal of Applied Physics;1/1/2001, Vol. 89 Issue 1, p420 

    The mechanisms of enhanced electron injection into the electron transport layer of Alq[sub 3] [tris(8-hydroxyquinoline)-aluminum] via LiF interlayers are studied by means of I-V characteristics, secondary ion mass spectroscopy (SIMS), and Kelvin probe measurements. Devices for single carrier...

  • Fabrication of polymer light-emitting diodes using doped silicon electrodes. Parker, I.D.; Kim, Helen H. // Applied Physics Letters;4/4/1994, Vol. 64 Issue 14, p1774 

    Examines the fabrication of light-emitting diodes (LED) from semiconducting conjugated polymer. Use of doped silicon substrates as an electrode material; Possibility of the procedure to integrate LED into silicon based integrated circuitry; Demonstration of low-voltage light emission from...

  • Enhanced performance of polymer light-emitting diodes using high-surface area polyaniline network electrodes. Yang, Y.; Westerweele, E.; Zhang, C.; Smith, P.; Heeger, A. J. // Journal of Applied Physics;1/15/1995, Vol. 77 Issue 2, p694 

    Presents a study which enhanced the performance of polymer light emitting diodes with the use of high-surface area polyaniline (PANI) network electrodes. Experimental methods; Formation of the PANI network electrode; Effect of PANI- camphor sulfuric acid concentration in the initial blends.

  • Efficient green light-emitting diodes from a phenylated derivative of poly(p-phenylene–vinylene). Cacialli, F.; Friend, R. H.; Haylett, N.; Daik, R.; Feast, W. J.; dos Santos, D. A.; Bre´das, J. L. // Applied Physics Letters;12/16/1996, Vol. 69 Issue 25, p3794 

    We have used polyvinylcarbazole, PVK, in combination with poly(p-phenylene vinylene), PPV and a green-emitting, soluble derivative, poly(4,4′-diphenylene diphenylvinylene) or briefly PDPV, to fabricate triple-layer light-emitting diodes PPV/PVK/PDPV/metal, with indium tin oxide as the...

  • Indium contamination from the indium–tin–oxide electrode in polymer light-emitting diodes. Schlatmann, A. R.; Floet, D. Wilms; Hilberer, A.; Garten, F.; Smulders, P. J. M.; Klapwijk, T. M.; Hadziioannou, G. // Applied Physics Letters;9/16/1996, Vol. 69 Issue 12, p1764 

    We have found that polymer light-emitting diodes (LEDs) contain high concentrations of metal impurities prior to operation. Narrow peaks in the electroluminescence spectrum unambiguously demonstrate the presence of atomic indium and aluminum. Rutherford backscattering spectroscopy (RBS) and...

  • Stabilization of electrode migration in polymer electroluminescent devices. Chua, Soo-Jin; Ke, Lin; Kumar, Ramadas Senthil; Zhang, Keran // Applied Physics Letters;8/5/2002, Vol. 81 Issue 6, p1119 

    A thin 3-nm-thick parylene layer is deposited by chemical vapor deposition at room temperature on the indium tin oxide (ITO) coated glass substrate to form a bilayer anode of an organic light emitting diode. The parylene layer forms a conformal film to cover the spikes present in the ITO film....

  • Transparent organic light-emitting diodes using metal acethylacetonate complexes as an electron injective buffer layer. Yamamori, Asuka; Hayashi, Sachiko; Koyama, Toshiki; Taniguchi, Yoshio // Applied Physics Letters;5/21/2001, Vol. 78 Issue 21, p3343 

    We studied transparent organic light-emitting diodes, which had a transparent top electrode deposited by sputtering, for possible application to a transparent light-emitting display. In the fabrication of a transparent electrode on an organic layer, steps must be taken to reduce the damage...

  • Polymeric anodes for improved polymer light-emitting diode performance. Carter, S.A.; Angelopoulos, M. // Applied Physics Letters;4/21/1997, Vol. 70 Issue 16, p2067 

    Examines the use of polyaniline and polyethylenedioxythiophene transparent electrodes as hole-injecting anodes in polymer light emitting diodes. Presentation of the anodes doped with variety of polymer and monomer-based acid; Effect of the dopant and solvent on the hole-injection properties;...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics