C-axis preferred orientation of laser ablated epitaxial PbTiO[sub 3] films and their electrical

Tabata, Hitoshi; Murata, Osamu; Kawai, Tomoji; Kawai, Shichio; Okuyama, Masanori
January 1994
Applied Physics Letters;1/24/1994, Vol. 64 Issue 4, p428
Academic Journal
Demonstrates the formation of preferential c-axis oriented lead titanate oxide (PbTiO[sub 3]) epitaxial films using pulsed laser ablation. Description of the electric and pyroelectric behavior of PbTiO[sub 3] films; Display of clear and large ferroelectric hysteresis loops films; Pyroelectric coefficient of the films.


Related Articles

  • Deposition of large area YBa[sub 2]Cu[sub 3]O[sub 7] superconducting films by laser scanning.... Song, W.D.; An, C.W. // Applied Physics Letters;12/13/1993, Vol. 63 Issue 24, p3370 

    Presents a method of laser scanning ablation for producing large area YBa[sub 2]Cu[sub 3]O[sub 7] superconducting films. Effectiveness of the laser scanning ablation method; Measurement of critical current density; Use of x-ray diffraction for c-axis orientation of the films.

  • Electronic and mechanical properties of carbon nitride films prepared by laser ablation.... Zhong-Min Ren; Yuan-Cheng Du // Applied Physics Letters;9/12/1994, Vol. 65 Issue 11, p1361 

    Prepares carbon nitride films using laser ablation graphite under nitrogen ion bombardment. Existence of carbon-nitrogen bonds in the films using Raman shift; Observation of the presence of paracyanogen-like materials using time-of-flight measurements; Characterization of the crystal properties...

  • Inexpensive substrate heater for oxidizing environments Paturi, P.; Huhtinen, H.; Laiho, R. // Review of Scientific Instruments;Nov98, Vol. 69 Issue 11, p3945 

    Describes the construction of substrate heater for oxidizing environment. Location of the heating element; Description of the vacuum side of the quartz tube; Application of substrate heater for laser ablation of superconducting films.

  • Pulsed-laser ablation growth of epitaxial ZnSe[sub 1-x]S[sub x] films and superlattices with.... McCamy, J.W.; Lowndes, Douglas H. // Applied Physics Letters;11/29/1993, Vol. 63 Issue 22, p3008 

    Presents a method for growing epitaxial semiconductor alloys with continuously variable composition. Use of a single pulsed laser ablation target of fixed composition; Removal of the principal barrier to pulsed-laser ablation (PLA) growth ; Application of method for PLA growth of other compound...

  • Growth of highly doped p-type ZnTe films by pulsed laser ablation in molecular nitrogen. Rouleau, C.M.; Lowndes, D.H. // Applied Physics Letters;10/23/1995, Vol. 67 Issue 17, p2545 

    Examines the growth of highly-doped p-type zinc telluride (ZnTe) epitaxial films by pulsed laser ablation in molecular nitrogen. Extraction of atomic nitrogen from direct current and radio frequency plasma source; Production of high hole concentrations in laser ablated ZnTe; Formation of ohmic...

  • Mechanisms of oxygen incorporation in indium–tin–oxide films deposited by laser ablation at room temperature. Morales-Paliza, M. A.; Haglund, R. F.; Feldman, L. C. // Applied Physics Letters;5/20/2002, Vol. 80 Issue 20, p3757 

    The use of [sup 18]O[sub 2] as a background gas in pulsed-laser deposition (PLD) of indium-tin-oxide (ITO) films allows clear discrimination between the two oxygen sources in the films: target and background gas. A study of both stoichiometric and electrical properties of the ITO films in terms...

  • Laser ablation of Co:ZnO films deposited from Zn and Co metal targets on (0001) Al[sub 2]O[sub 3] substrates. Prellier, W.; Fouchet, A.; Mercey, B.; Simon, Ch.; Raveau, B. // Applied Physics Letters;5/19/2003, Vol. 82 Issue 20, p3490 

    We report on the synthesis of high-quality Co-doped ZnO thin films using the pulsed laser deposition technique on (0001)-Al[sub 2]O[sub 3] substrates performed in an oxidizing atmosphere, using Zn and Co metallic targets. We first optimized the growth of ZnO in order to obtain the less strained...

  • Secondary electrons generated by fast neutral bombardment of the growing film during laser.... Brongersma, S.H.; Kools, J.C.S.; Baller, T.S.; Beijerinck, H.C.W.; Dieleman, J. // Applied Physics Letters;9/9/1991, Vol. 59 Issue 11, p1311 

    Examines the time-of-flight measurements on the films produced during excimer laser ablation of titanium nitride by fast neutral bombardment. Number of ions produced in the ablation process; Magnitude of the positive current due to secondary electrons.

  • Pulsed laser deposition of silicon carbide at room temperature. Capano, M.A.; Walck, S.D. // Applied Physics Letters;6/20/1994, Vol. 64 Issue 25, p3413 

    Details the pulsed laser deposition of silicon carbide (SiC) films at room temperature. Ablation of a 6H-SiC target using radiation from the krypton fluoride excimer laser; Observation of the Si 2p peaks; Shift in binding energy revealed by the scans of the C 1s peak; Equivalence of the...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics