TITLE

Versatile 4 K nuclear magnetic resonance probe and cryogenic system for small-bore high-field

AUTHOR(S)
Reyes, A.P.; Bachman, H.N.
PUB. DATE
May 1997
SOURCE
Review of Scientific Instruments;May97, Vol. 68 Issue 5, p2132
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Describes a complete design for a versatile nuclear magnetic resonance cryostat/probe systems specifically adapted for small 32 millimeter bore bitter magnets. Two main problems solved by the probe in association with constrained environments; Implementation of a system with an evacuated space for tuning capacitors to avoid high voltage breakdown.
ACCESSION #
4290444

 

Related Articles

  • High-pressure probe and cryostat for pulsed NMR in a cryomagnet. Peereboom, P. W. E.; Prins, K. O.; Trappeniers, N. J. // Review of Scientific Instruments;Jul1988, Vol. 59 Issue 7, p1182 

    The construction of a probe suitable for pulsed NMR for the investigation of fluids and solids at hydrostatic pressures up to 3 kbar is reported. The probe fits in a cryostat constructed inside the room-temperature bore of a superconducting magnet. The temperature can be controlled in the range...

  • A simple miniature magnetic probe with inherent electrostatic rejection. Loewenhardt, P. K.; Blackwell, B. D.; Zhang, Beichao // Review of Scientific Instruments;Nov93, Vol. 64 Issue 11, p3334 

    A modification of a basic center-tapped magnetic probe design has been developed wherein subtraction of capacitive signals is carried out by the probe itself. The electrostatic rejection of this probe is compared with other typical designs.

  • Electrical measurements with a SQUlD susceptometer. Wong, H. K. // Review of Scientific Instruments;Jun91, Vol. 62 Issue 6, p1664 

    We describe the design of a probe that can be inserted into a SQUID susceptometer (S.H.E. model VTS-805) for electrical measurements at variable temperature and high magnetic field. This top-loading probe allows multisample measurements and rapid sample replacement without disturbing the...

  • A multiple pin, flip-chip system for microwave and gigabit per second cryogenic device testing at variable temperatures. Wire, M. S.; Durand, D. J.; Silver, A. H.; Wagner, M. K.; Hamilton, C. A. // Review of Scientific Instruments;Feb2001, Vol. 72 Issue 2, p1542 

    We have developed a cryogenic probe and cryostat system to test both active and passive superconducting devices and circuits up to microwave frequencies at variable temperatures. Our system consists of two basic parts: the cryostat and the matching probe. The cryostat is a unique, very...

  • Probehead with interchangeable tunable bridged loop-gap resonator for pulsed zero-field optically... Weis, V.; Mittelbach, W.; Claus, J.; Mobius, K. // Review of Scientific Instruments;May97, Vol. 68 Issue 5, p1980 

    Describes a probehead with interchangeable tunable bridged loop-gap resonator for pulsed zero-field optically detected magnetic resonance (ODMR) experiments on photoexcited triplet states. Description of the resonator; Possibility of reducing microwave pulse lengths; Microwave detection of...

  • New probe for high-temperature nuclear-magnetic-resonance spectroscopy with ppm resolution. Stebbins, J. F.; Schneider, E.; Murdoch, J. B.; Pines, A.; Carmichael, I. S. E. // Review of Scientific Instruments;Jan1986, Vol. 57 Issue 1, p39 

    A new type of instrument has been designed and built to make Fourier transform nuclear-magnetic-resonance (NMR) spectroscopic measurements at temperatures to at least 1200 °C, with a resolution of about 1 ppm. A sample is rapidly and repeatedly shuttled between the furnace and the radio...

  • Probe calibration in magnetic force microscopy. Göddenhenrich, T.; Lemke, H.; Mück, M.; Hartmann, U.; Heiden, C. // Applied Physics Letters;12/10/1990, Vol. 57 Issue 24, p2612 

    Quantitative image interpretation in magnetic force microscopy requires information about the geometric and magnetic configuration of the employed microprobe. If the magnetic microfield of a given sample is known in detail, a calibration of the probe is possible. Using the well-defined...

  • Pulsed NMR probe-monitoring system. Heeschen, W. A.; Alderman, D. W.; Grant, David M. // Review of Scientific Instruments;Jun87, Vol. 58 Issue 6, p1128 

    A simple device for measuring the instantaneous reflected power from a NMR probe is described. It is built from commercially available directional power-meter components coupled to a low-speed oscilloscope. The device can be used to monitor the performance of a probe while data are being...

  • A low temperature NMR probe for use in a dilution refrigerator. Kuhns, P. L.; Lee, S.-H.; Coretsopoulos, C.; Hammel, P. C.; Gonen, O.; Waugh, J. S. // Review of Scientific Instruments;Sep91, Vol. 62 Issue 9, p2159 

    We report an NMR probe that we use in ultra low temperature experiments in a top-loading dilution refrigerator. The probe is thermally anchored to the 1.2 K pumped 4He pot and is thermally isolated from the sample located inside a Kel-F cup containing liquid 3He. The probe is adapted from a...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics