TITLE

Comparison of calculated phase-sensitive recoverable signals using a Fabry--Perot cavity in

AUTHOR(S)
Bava, E.; Massari, F.
PUB. DATE
May 1997
SOURCE
Review of Scientific Instruments;May97, Vol. 68 Issue 5, p1927
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Focuses on the analysis of signals which can be recovered in a phase-sensitive detector after either transmission through or reflection from a Fabry-Perot interferometer of a phase-modulated light. Collection and comparison of frequency responses; Analysis of the effects of amplitude modulation resulting in offsets and line shape distortions.
ACCESSION #
4290410

 

Related Articles

  • Gamma radiation resistant Fabry–Perot fiber optic sensors. Liu, Hanying; Miller, Don W.; Talnagi, Joseph // Review of Scientific Instruments;Aug2002, Vol. 73 Issue 8, p3112 

    The Nuclear Regulatory Commission (NRC) in 1998 completed a study of emerging technologies that could be applicable to measurement systems in nuclear power plants [H. M. Hashemian et al., "Advanced Instrumentation and Maintenance Technologies for Nuclear Power Plants," NUREG/ CR-5501 (1998)]....

  • Investigation and compensation of polarization-induced signal fading in an extrinsic fiber-based Fabry-Perot interferometric vibrometer. Pullteap, S.; Seat, H. C. // Fiber Optic Sensors & Systems;Jul2012, Vol. 26 Issue 7, p7 

    An extrinsic-type fiber Fabry-Perot interferometer is proposed and demonstrated for vibrometric applications. The sensor operates on the principle of a "virtual" pseudo-dual cavity generated within the sensing arm due to the introduction of an adapted polarization-controlling optics into the...

  • Frequency locking of a Nd:YAG laser using the laser itself as the optical phase modulator. Cantatore, G.; Della Valle, F.; Milloti, E.; Zavattini, E.; Polacco, E.; Perrone, F.; Rizzo, C.; Zavattini, G.; Ruoso, G. // Review of Scientific Instruments;Apr95, Vol. 66 Issue 4, p2785 

    Discusses frequency locking of a Nd:YAG tunable laser to a Fabry-Perot cavity in air using the Pound-Drever technique. Achievement of the necessary phase modulation of the beam using the direct use of the laser instead of an external phase modulator; Relative amplitude modulation obtained;...

  • Optical fiber sensor for small angle and infinite angle detection. Lü, Tao; Lang, Xianli; Han, Yanling // Review of Scientific Instruments;May2008, Vol. 79 Issue 5, p053105 

    An optical fiber angle sensor that consists of a cam, linear displacement attenuators, and a sensitive Fabry–Pérot cavity (FPC), is demonstrated to simultaneously measure small angle and infinite angle with high resolution. When the cam is driven to rotate by a fixed rotary shaft, a...

  • Amplitude and Phase Drift Correction of EFPI Sensor Systems Using Both Adaptive Kalman Filter and Temperature Compensation for Nanometric Displacement Estimation. Chawah, P.; Sourice, A.; Plantier, G.; Seat, H. C. // Fiber Optic Sensors & Systems;Jul2012, Vol. 26 Issue 7, p10 

    Nanometric displacement measurements by Extrinsic Fiber Fabry-Perot interferometers (EFPI) is extremely susceptible to external environmental changes. Temperature, in particular, has a remarkable influence on the optical power and wavelength of the laser diode in use, in addition to the thermal...

  • Optical fiber temperature sensor using a gain-switched Fabry–Perot semiconductor laser self-seeded from a linearly chirped fiber Bragg grating. Li, Shenping; Chan, K. T. // Applied Physics Letters;12/7/1998, Vol. 73 Issue 23 

    We present a highly sensitive fiber temperature sensor based on a gain-switched Fabry–Perot semiconductor laser self-seeded from a linearly chirped fiber Bragg grating. A temperature resolution of better than 0.1 °C was demonstrated. This sensor not only has the advantage of robustness...

  • An optical fiber multiplexing system using Fabry–Perot cavities. Wang, Qi // Review of Scientific Instruments;Jan1993, Vol. 64 Issue 1, p82 

    An optical fiber multiplexing sensing system with Fabry–Perot interferometers is proposed. A white light source and multimode fibers are used in the system. A theoretical result for the central maximum optical transmittance peak’s half width is given. In the proposed system, a...

  • The Virgo Detector. Acernese, F.; Amico, P.; Al-Shourbagy, M.; Aoudia, S.; Avino, S.; Babusci, D.; Ballardin, G.; Barillé, R.; Barone, F.; Barsotti, L.; Barsuglia, M.; Beauville, F.; Bizouard, M. A.; Boccara, C.; Bondu, F.; Bosi, L.; Bradaschia, C.; Braccini, S.; Brillet, A.; Brisson, V. // AIP Conference Proceedings;2005, Vol. 794 Issue 1, p307 

    The Virgo Experiment is a gravitational wave interferometric detector. It consists in a Michelson interferometer with two 3 km long Fabry-Perot cavities as orthogonal arms. The installation of the detector has been completed in September 2003 and presently the apparatus is under commissioning....

  • Methane Sensor for Mars. Mathew, Kurian; Sarkar, S. S.; Srinivas, A. R.; Dutta, Moumita; Rohit, Minal; Seth, Harish; Kumaran, Rajiv; Pandya, Kshitij; Kumar, Ankush; Sharma, Jitendra; Desai, Jalshri; Patel, Amul; Patel, Vishnu; Shukla, Piyush; Moorthi, S. Manthira; Singh, Aravind K.; Gupta, Ashutosh; Rathi, Jaya; Babu, P. Narayana; Kuriakose, Saji A. // Current Science (00113891);9/25/2015, Vol. 109 Issue 6, p1087 

    Methane Sensor for Mars (MSM), on-board Mars Orbiter Mission is a differential radiometer based on Fabry–Perot Etalon (FPE) filters which measures column density of methane in the Martian atmosphere. It is the first FPE sensor ever flown to space. Spectral, spatial and radiometric...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics