TITLE

High quality ArF laser ablation of photoincubated polyethylene

AUTHOR(S)
Dyer, P.E.; Karnakis, D.M.
PUB. DATE
March 1994
SOURCE
Applied Physics Letters;3/14/1994, Vol. 64 Issue 11, p1344
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the interaction of argon fluoride excimer laser with polyethylene. Use of helium-neon laser probe beam deflection and scanning electron microscopy; Role of the ultraviolet absorbing chromophores for polymer ablation; Basis for describing the transmission results.
ACCESSION #
4289573

 

Related Articles

  • Laser-assisted growth of diamond particulates on a silicon surface from a cyclohexane liquid. Lu, Y.F.; Huang, S.M.; Wang, X.B.; Shen, Z.X. // Applied Physics A: Materials Science & Processing;1998, Vol. 66 Issue 5, p543 

    Abstract. Excimer laser irradiation of a single-crystalline silicon surface immersed under cyclohexane liquid is demonstrated to form diamond particulates. Scanning electron microscopy and Raman spectroscopy have been used to study the deposited particulates. A mechanism based on the...

  • KrF excimer laser ablation of thin Cr film on glass substrate. Lee, S.K.; Na, S.J. // Applied Physics A: Materials Science & Processing;1999, Vol. 68 Issue 4, p417 

    Abstract. In order to understand the removal mechanism and seek the optimal processing conditions, KrF excimer laser ablation of Cr films deposited on glass substrates is investigated. The surface morphology of the laser-irradiated spot is examined by scanning electron microscopy, and the...

  • The Influence of KrF Excimer Laser Irradiation on the Surface of Collagen and Collagen/PVP Films. Wisniewski, M.; Sionkowska, A.; Kaczmarek, H.; Skopinska, J.; Lazare, S.; Tokarev, V. // International Journal of Photoenergy;Jan2006, p1 

    The surface properties of collagen and collagen/poly(vinyl pyrrolidone) (PVP) films after KrF excimer laser irradiation (λ = 248 nm) were investigated by means of the technique of scanning electron microscopy (SEM) and optical microscopy (OM). The laser irradiation of the used specimens...

  • Underwater excimer laser ablation of polymers. Elaboudi, I.; Lazare, S.; Belin, C.; Talaga, D.; Labrugère, C. // Applied Physics A: Materials Science & Processing;Sep2008, Vol. 92 Issue 4, p743 

    In this paper, we study the photoablation kinetic of poly (ethylene terephthalate) (PET), polycarbonate (PC), polyimide (PI) and polystyrene (PS) in both air and water. Compared to the results obtained in air, we highlight the decrease of the ablation threshold (AT) of polyesters in contact with...

  • Cumulative effect near ablation threshold of polymer by 308-nm excimer laser pulse. Guo, Hongping; Lou, Qihong // Journal of Applied Physics;8/15/1991, Vol. 70 Issue 4, p2333 

    Presents a study which investigated the near-threshold behavior of the ablation processes of excimer lasers using light deflection spectroscopy as a detection method. Experimental setup and procedure; Traverse deflection signals at the laser intensity well above ablation threshold; Conclusion.

  • Ablation of polytetrafluoroethylene (Teflon) with femtosecond UV excimer laser pulses. Küper, S.; Stuke, M. // Applied Physics Letters;1/2/1989, Vol. 54 Issue 1, p4 

    Experiments on the ablation of undoped polytetrafluoroethylene (Teflon) with 300 fs UV excimer laser pulses at 248 nm are reported for the first time. In contrast to standard excimer laser pulses, these ultrashort pulses ablate Teflon with good edge quality and no signs of thermal damage for...

  • PET surface modifications by treatment with monochromatic excimer UV lamps. Praschak, D.; Bahners, T.; Schollmeyer, E. // Applied Physics A: Materials Science & Processing;1998, Vol. 66 Issue 1, p69 

    Abstract. Physical and chemical surface modifications of polyethyleneterephthalate (PET) films due to treatment with excimer UV lamps (222 nm) have been studied. Interpretations of the reactions and products were made in comparison to known PET irradiations with excimer UV lasers and broad-band...

  • A Simple and Cost-effective System for Measuring the Recrystallization Characterization of Polycrystalline Silicon Following Excimer Laser Crystallization. KUA, C. C.; CHAO, C. S. // Lasers in Engineering (Old City Publishing);2011, Vol. 21 Issue 5/6, p353 

    Excimer laser crystallization (ELC) is a widely used technique for producing polycrystalline silicon (poly-Si) thin films. An optical inspection system with simple optical arrangements for rapid measurement of the recrystallization characterization of poly-Si thin films is developed in this...

  • Diode Pumped Solid State Lasers for Surface Microtexture. Mool C. Gupta; Wang, Longteng; Rothenbach, Christian; Sun, Keye // Journal of Laser Micro / Nanoengineering;2013, Vol. 8 Issue 2, p124 

    Surface microtexture has been observed under nanosecond pulsed laser irradiation of silicon and metals. Diode pumped solid state lasers with pulse width in the nanosecond regime can provide a low cost method for fabrication of large area microtextured surfaces. Results are presented on control...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics