TITLE

Laser polymer ablation threshold lowered by nanometer hot spots

AUTHOR(S)
Xiaoning Wen; Hare, David E.; Dlott, Dana D.
PUB. DATE
January 1994
SOURCE
Applied Physics Letters;1/10/1994, Vol. 64 Issue 2, p184
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the effect of nanometer-sized hot spots on laser polymer ablation. Synthesis of polymer thin films absorbing intense optical pulses; Synthesizers contained by the films; Impact of local thermal decomposition on ablation; Identification of ablation thresholds in different optical pulses.
ACCESSION #
4289538

 

Related Articles

  • Laser ablation and the unzipping of addition polymer. Blanchet, Graciela B. // Journal of Applied Physics;10/1/1996, Vol. 80 Issue 7, p4082 

    Deals with a study that investigated laser ablation and the unzipping of addition polymer. Importance of the ability to control decomposition path and products for addition polymers in applications such as thin film fabrication; Uses of laser ablation; Differences between pyrolytic and laser...

  • Possibility of depositing magnetic iron oxide films by excimer laser ablation of an.... Meng Ouyang; Hiraoka, Hiroyuki // Applied Physics Letters;9/18/1995, Vol. 67 Issue 12, p1781 

    Investigates the possibility of depositing magnetic iron oxide films by excimer laser ablation of an organometallic polymer. Means of investigation used for the deposited films; Information on the measured magnetic hysteresis loop of the deposited film; Details on the values of magnetization...

  • Formation of high mass carbon cluster ions from laser ablation of polymers and thin carbon films. Creasy, William R.; Brenna, J. T. // Journal of Chemical Physics;2/15/1990, Vol. 92 Issue 4, p2269 

    Three materials were studied by laser ablation/Fourier transform mass spectrometry, using 266 nm laser radiation: a copolymer of ethylene and tetrafluoroethylene (ETFE), polyphenylene sulfide (PPS), and a diamond-like carbon film (DLC). In each case, positive ion mass spectra exhibit primarily...

  • Effect of laser-ablated copper nanoparticles on polymerization of 1,1,3,3-tetraphenyl-1,3-disilacyclobutane. Song, R. G.; Yamaguchi, M.; Nishimura, O.; Shimokawa, K.; Kushibiki, N.; Suzuki, M. // Applied Physics A: Materials Science & Processing;2004, Vol. 78 Issue 6, p867 

    We have studied the effect of copper nanoparticles produced by laser ablation on the ring-opening polymerization of 1,1,3,3-tetraphenyl-1,3-disilacyclobutane (TPDC). The particle size and distribution of laser-ablated, copper nanoparticles were controlled by laser-ablation conditions such as...

  • Influence of thermal diffusion on the laser ablation of thin polymer films. Fardel, R.; Nagel, M.; Lippert, T.; Nüesch, F.; Wokaun, A.; Luk'Yanchuk, B. S. // Applied Physics A: Materials Science & Processing;Mar2008, Vol. 90 Issue 4, p661 

    The laser ablation of a photosensitive triazene polymer was investigated with a ns XeCl excimer laser over a broad range of thicknesses (10–400 nm). We found that the ablation threshold fluence increased dramatically with decreasing film thickness for films thinner than 50 nm. Ablation on...

  • Thin-film deposition by a new laser ablation and plasma hybrid technique. Krishnaswamy, J.; Rengan, A.; Narayan, J.; Vedam, K.; McHargue, C. J. // Applied Physics Letters;6/12/1989, Vol. 54 Issue 24, p2455 

    We have developed a new laser ablation and plasma hybrid technique for depositing thin diamond-like carbon (DLC) films on Si<100> substrates at room temperature and at 110 °C with improved optical and mechanical properties. The technique involves coupling of laser energy (λ=0.308 μm,...

  • Laser patterned arrays of interfaces in magnetoresistive La[sub 2/3]/Sr[sub 1/3]MnO[sub 3] thin... Bibes, M.; Martinez, B. // Applied Physics Letters;10/4/1999, Vol. 75 Issue 14, p2120 

    Reports on the fabrication of laser patterned arrays of interfaces on epitaxial thin films with the aim of developing versatile and low-cost technologies for interface engineering in manganites. Interfaces in the films induced by laser patterning of monocrystalline substrates; Growth of...

  • Microwave properties of compositionally graded (Ba, Sr)TiO[sub 3] thin films according to the direction of the composition gradient for tunable microwave applications. Lee, Su-Jae; Moon, Seung Eon; Ryu, Han-Cheol; Kwak, Min-Hwan; Kim, Young-Tae; Han, Seok-Kil // Applied Physics Letters;3/31/2003, Vol. 82 Issue 13, p2133 

    Compositionally graded (Ba[SUBx], Sr[SUB1-x]TiO[SUB3] (BST) thin films were deposited on MgO substrates by pulsed laser ablation. The microwave properties of the graded BST thin films were investigated at microwave frequencies with coplanar waveguide (CPW) meander-line phase shifters as a...

  • Epitaxial and highly electrical conductive La0.5Sr0.5TiO3 films grown by pulsed laser... Wenbin Wu; Fei Lu // Journal of Applied Physics;7/15/2000, Vol. 88 Issue 2, p700 

    Reports that the target material with nominal composition of La0.5Sr0.6TiO3 sintered in air is an insulator and not a single-phase compound. Fabrication of highly electrical conductive and epitaxial thin films by pulsed laser ablation.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics