TITLE

A highly processable metallic glass:Zr[sub 41.2]Ti[sub 13.8]Cu[sub 12.5]Ni[sub 10.0]Be[sub 22.5]

AUTHOR(S)
Peker, A.; Johnson, W.L.
PUB. DATE
October 1993
SOURCE
Applied Physics Letters;10/25/1993, Vol. 63 Issue 17, p2342
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Investigates the properties of a family of metallic alloys which exhibit excellent glass forming ability. Cooling rate needed in maintaining the glassy phase of the material; Effect of casting rods in silica containers; Results of the liquid alloy study using scanning calorimetry; Origin of the glass forming ability of the alloys.
ACCESSION #
4289486

 

Related Articles

  • Effects of relaxation on glass transition and crystallization of ZrTiCuNiBe bulk metallic glass. Zhuang, Yan Xin; Wang, Wei Hua // Journal of Applied Physics;6/1/2000, Vol. 87 Issue 11, p8209 

    Presents a study which used a differential scanning calorimetry to investigate the effects of relaxation on the glass transition and crystallization of a type of metallic glass. Effect of temperature annealing to metallic glasses; Process of crystallization of an amorphous alloy.

  • Reversible structural relaxation in Fe-Ni-B-Si metallic glasses. Brüning, R.; Altounian, Z.; Ström-Olsen, J. O. // Journal of Applied Physics;11/1/1987, Vol. 62 Issue 9, p3633 

    Studies reversible structural relaxation in (Fe[sub1-x]Ni[subx])[sub80]B[sub10]Si[sub10] by differential scanning calorimetry and x-ray diffraction. Types into which the modifications of the atomic structure of metallic glasses may be classified; Irreversible exotherm in enthalpy flow from an...

  • Quantification of free volume differences in a Zr44Ti11Ni10Cu10Be25 bulk amorphous alloy. Launey, M. E.; Kruzic, J. J.; Li, C.; Busch, R. // Applied Physics Letters;7/30/2007, Vol. 91 Issue 5, p051913 

    Deformation of metallic glasses requires the existence of free volume to allow atomic movement under mechanical loading. Accordingly, quantification of the free volume state of the alloy is crucial to understand its mechanical behavior. By annealing below the glass transition temperature, the...

  • Glass-forming ability and thermoplastic formability of a PdNiSiP glassy alloy. Chen, N.; Yang, H. A.; Caron, A.; Chen, P. C.; Lin, Y. C.; Louzguine-Luzgin, D. V.; Yao, K. F.; Esashi, M.; Inoue, A. // Journal of Materials Science;Apr2011, Vol. 46 Issue 7, p2091 

    The glass-forming ability of a PdNiSiP alloy has been investigated. This alloy exhibits a wide supercooled liquid region of 107 K, a high reduced glass transition temperature of 0.596 and a small fragility parameter of 28, indicating that this alloy is a good glass former. Using flux treatment,...

  • Crystallization kinetics of metallic glasses. Suñol, Joan Josep; Bonastre, J. // Journal of Thermal Analysis & Calorimetry;Nov2010, Vol. 102 Issue 2, p447 

    In this study, the temperature-heating rate diagram of the main crystallization process of two metallic glasses, FeNiMoBSi and FeNiMoB was obtained from one experimental differential scanning calorimetry (DSC) scan and the knowledge of their activation energy as determined by an isoconversional...

  • Fabrication of an In Situ Bulk Metallic Glass Composite with High Magnesium Content. Biletska, Olga; Laws, Kevin; Gibson, Mark; Ferry, Michael // Metallurgical & Materials Transactions. Part A;May2014, Vol. 45 Issue 5, p2352 

    In this work, an in situ bulk metallic glass composite in the Mg-Ni-Gd ternary system with high Mg content (>80 at. pct) that contains a ductile Mg-rich crystalline phase was produced by copper mold casting. The stability and devitrification process of the amorphous matrix in the composite...

  • Preparation of La68Al10Cu20Co2 bulk metallic glass by rapid compression. Liu, X. R.; Hong, S. M.; Lü, S. J.; Shen, R. // Applied Physics Letters;8/20/2007, Vol. 91 Issue 8, p081910 

    Melt of La68Al10Cu20Co2 alloy was solidified by rapid compression within 20 ms to 5.5 GPa at 733 K. The structural analysis demonstrates that the recovered alloy is a fully glassy structure indicating that the method is an effective way for preparing bulk metallic glass. Differential scanning...

  • THE PRECIPITATION OF NANOCRYSTALLINE STRUCTURE IN THE JOULE HEATED Fe72Al5Ga2P11C6B4 METALLIC GLASSES. Mitrović, N.; Kane, S.; Roth, S.; Kalezić-Glišović, A.; Mickel, C.; Eckert, J. // Journal of Mining & Metallurgy. Section B: Metallurgy;2012, Vol. 48 Issue 2, p319 

    In this study, the evolution of the nanostructure on dc Joule heated Fe72Al5Ga2P11C6B4 metallic glass ribbons have been investigated. Heating power per square area (PS) was ranging between 0.8 to 7.1 W/cm² in order to get various stages of relaxation or nanocrystallization. The...

  • Glass Forming Ability and Magnetic Properties of FeNiBSiNbM (M=Cu, Zr, Ti, Y, Pt) Bulk Glassy Alloys Fabricated by Suction Casting. Engin Kırımlı, Handan; Sarlar, Kagan; Oguz Konuk, A.; Duman, Nagehan; Vedat Akdeniz, M.; Kucuk, Ilker // Journal of Superconductivity & Novel Magnetism;May2013, Vol. 26 Issue 5, p1683 

    In this study, the effects of Cu, Zr, Ti, Y, Pt substitution for Nb additions on the stability and magnetic properties of Fe-Ni-based bulk metallic glass (BMG) alloys fabricated by the suction casting method are investigated. The saturation magnetization ( J) and coercivity ( H) for as-cast...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics