White light-emitting organic electroluminescent devices using the poly(N-vinylcarbazole) emitter

Kido, J.; Hongawa, K.
February 1994
Applied Physics Letters;2/14/1994, Vol. 64 Issue 7, p815
Academic Journal
Develops a white light-emitting organic electroluminescent device with hole-transporting and electron transport layers. Use of fluorescent dye-doped poly(N-vinylcarbazole) as the emitter layer; Extraction of white emission covering a wide range of visible region; Importance of high luminance for use in liquid crystal displays.


Related Articles

  • Organic electroluminescent diodes. Tang, C. W.; VanSlyke, S. A. // Applied Physics Letters;9/21/1987, Vol. 51 Issue 12, p913 

    A novel electroluminescent device is constructed using organic materials as the emitting elements. The diode has a double-layer structure of organic thin films, prepared by vapor deposition. Efficient injection of holes and electrons is provided from an indium-tin-oxide anode and an alloyed...

  • Enhanced hole injection in a bilayer vacuum-deposited organic light-emitting... Zhou, X.; He, J.; Liao, L.S.; Lu, M.; Xiong, Z.H.; Ding, X.M.; Hou, X.Y.; Tao, F.G.; Zhou, C.E.; Lee, S.T. // Applied Physics Letters;1/25/1999, Vol. 74 Issue 4, p609 

    Examines eenhanced hole injection in a bilayer vacuum-deposited light-emitting device which emits light from its top surface through an A1 cathode using p-type doped silicon (p-SI) as the anode material. Forward-bias-current-voltage characteristics of electroluminiscent devices; Mechanisms of...

  • Fiber Optic Backlighting: More Brightness, Longer Life, Less Power. Page, David // ECN: Electronic Component News;Jan2002 Part1of2, Vol. 46 Issue 1, p63 

    Focuses on advances in fiber optic backlighting technology. Enhancements in liquid crystal display; Advantages of electroluminescent devices; Type of fibers used.

  • Mechanisms of efficiency enhancement in the doped electroluminescent devices based on a europium complex. Zhou, Liang; Zhang, Hongjie; Shi, Weidong; Deng, Ruiping; Li, Zhefeng; Yu, Jiangbo; Guo, Zhiyong // Journal of Applied Physics;Dec2008, Vol. 104 Issue 11, p114507 

    In this study, we investigated the dependence of electroluminescence (EL) efficiency on carrier distribution in the light-emitting layer (EML) of the device based on Eu(TTA)3phen (TTA=thenoyltrifluoroacetone, phen=1,10-phenanthroline) doped 4,4′-N,N′-dicarbazole-biphenyl (CBP)...

  • OLEDs: better off once the delusion is dead. DIPERT, BRIAN // EDN;2/5/2009, Vol. 54 Issue 3, p8 

    The author comments on the initial hype for organic light-emitting diodes (OLEDs), a technology that is still largely in the research and development (R&D) realm. He states that he has always found that the liquid crystal display (LCD)-killer aspirations of OLED supporters to be a fool's...

  • Relationship between electrical transport and hole concentration in YBa2Cu3O7-x ultrathin films... Auer, R.; Schneider, R. // Journal of Applied Physics;4/1/1997, Vol. 81 Issue 7, p3237 

    Examines the relationship between electrical transport and hole concentration in YBA2Cu3O7-x ultrathin films. Use of superconducting field effect transistors; Determination of the hole concentration change; Measurement of the field-induced dielectric polarization of the SrTiO3 dielectric.

  • On the role of mobility and saturated velocity in the dynamic operation of p-i-n and.... Tiwari, Sandip; Tischler, Michael A. // Applied Physics Letters;3/2/1992, Vol. 60 Issue 9, p1135 

    Determines the role of low and high-field transport properties of electrons and holes in the speed and frequency response of lateral p-i-n and metal-semiconductor-metal photodetectors. Exhibition of response with two characteristic time constants; Improvement of response time at lower...

  • Study of organic light emitting devices with a 5,6,11,12-tetraphenylnaphthacene (rubrene)-doped hole transport layer. Aziz, Hany; Popovic, Zoran D. // Applied Physics Letters;3/25/2002, Vol. 80 Issue 12, p2180 

    We investigated the stability of an organic light emitting device (OLED) with structure of indiumtin-oxide (ITO) anode/N,N'-di(naphthalene-1-yl)-N,N'-diphenyl-benzidine hole transport layer (HTL)/tris(8-hydroxyquinoline) aluminum (AlQ[sub 3]) electron transport layer/Mg:Ag cathode, in which...

  • Bright-blue electroluminescence from a silyl-substituted ter-(phenylene-vinylene) derivative. Zhiquiang Gao; Lee, C.S.; Bello, I.; Lee, S.T.; Ruey-Ming Chen; Tien-Yau Luh; Shi, J.; Tang, C.W. // Applied Physics Letters;2/8/1999, Vol. 74 Issue 6, p865 

    Describes a bright-blue electroluminescent device fabricated using an emissive dopant and an electron-transporting host. Trimer which functioned as the host and electron transporter; Device structure; Current density of the emission; Current efficiency of the device.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics