TITLE

Fivefold multiply twinned crystallites in CuInSe[sub 2]

AUTHOR(S)
Wada, Takahiro; Negami, Takayuki
PUB. DATE
January 1994
SOURCE
Applied Physics Letters;1/17/1994, Vol. 64 Issue 3, p333
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the microstructure of polycrystalline CuInS2[sub 2] thin films. Application of cross-sectional high resolution electron microscopy; Use of three-source evaporation in thin film deposition on molybdenum coated glass substrate; Influence of growth accidents during deposition process in microtwin or stacking fault formation.
ACCESSION #
4284411

 

Related Articles

  • In-Situ TEM Observation of Twinning and Detwinning During Cyclic Loading in Mg. Morrow, Benjamin; McCabe, Rodney; Cerreta, Ellen; Tomé, Carlos // Metallurgical & Materials Transactions. Part A;Jan2014, Vol. 45 Issue 1, p36 

    In-situ transmission electron microscopy (TEM) is used to directly observe twin evolution in Mg under tension and compression. Twins grow during tensile loading. Upon load reversal, the first-generation twin detwins by nucleation and growth of a second-generation twin within its volume. This...

  • Evaluation of the Role of Deformation Twinning in Work Hardening Behavior of Face-Centered-Cubic Polycrystals. HAMDI, FARZAD; ASGARI, SIROUS // Metallurgical & Materials Transactions. Part A;Feb2008, Vol. 39 Issue 2, p294 

    Results of an investigation on the evolution of microstructure during simple compression testing of two face-centered-cubic (fcc) polycrystals, IN625 superalloy and 316L stainless steel, are reported and a review on the existing data related to the uniaxial deformation of fcc polycrystals is...

  • On the role of hierarchical twins for achieving maximum yield strength in nanotwinned metals. Zhu, Linli; Kou, Hongning; Lu, Jian // Applied Physics Letters;8/20/2012, Vol. 101 Issue 8, p081906 

    The dependence of the strength of polycrystalline metals with hierarchical nanotwins on twin spacing and grain size is theoretically studied with a dislocation-based theoretical model, which describes the twin spacing-dependent flow stress. The analysis indicates that the flow stress first...

  • MODELO FÍSICO DA DEFORMAÇÃO E ENCRUAMENTO DO AÇO TWIP COM ALTO TEOR DE MANGANÊS E BAIXO CARBONO. Spindola, Mirelle Oliveira; Gonzalez, Berenice Mendonça; Santos, Dagoberto Brandão // Tecnologia em Metalurgia, Materiais e Mineração;abr-jun2010, Vol. 6 Issue 4, p252 

    The new concepts for building automotive structures with impact resistance, formability, and low specific weight lead to increase in the research for materials with high strength and toughness, combined with low density. The TWIP steel (Twinning Induced Plasticity) can meet these needs and...

  • Microstructure investigations of Pt-modified ? prime-Ni3Al + ?-Ni coatings on Ni-based superalloys. Guanghui Cao; Taoping Ou; Hua Jiang; Russell, Alan M. // Journal of Materials Research;Jun2010, Vol. 25 Issue 6, p25 

    The microstructure of Pt-modified γ'-Ni3Al + γ-Ni coating on CMSX-4 single-crystal superalloy has been investigated by transmission electron microscopy (TEM). Cross-sectional TEM analyses showed the presence of precipitates in the coating. This precipitate was identified as the hexagonal...

  • Crystallography of Martensite in TiAu Shape Memory Alloy. Inamura, T.; Hosoda, H. // Metallurgical & Materials Transactions. Part A;Jan2011, Vol. 42 Issue 1, p111 

    The twin structure, habit plane orientation, and morphology of B19 martensite in TiAu, which is a candidate shape memory alloy (SMA) for high-temperature and biomedical applications, were investigated by conventional transmission electron microscopy. Almost all internal twins were {111} type I...

  • Fivefold annealing twin in nanocrystalline Cu. Huang, P.; Dai, G. Q.; Wang, F.; Xu, K. W.; Li, Y. H. // Applied Physics Letters;11/16/2009, Vol. 95 Issue 20, p203101 

    Fivefold annealing twin has been observed in nanocrystalline Cu at zero external stress. The microstructure of the multifold twins at various annealing temperatures has been examined by transmission electron microscopic in detail. Contrary to the well known sequential twinning mechanism,...

  • Constitutive Modeling of the Tensile Behavior of Al-TWIP Steel. Kim, Jinkyung; Estrin, Yuri; Beladi, Hossein; Timokhina, Ilana; Chin, Kwang-Geun; Kim, Sung-Kyu; De Cooman, Bruno // Metallurgical & Materials Transactions. Part A;Feb2012, Vol. 43 Issue 2, p479 

    High Mn steels demonstrate an exceptional combination of high strength and large ductility as a result of their high strain-hardening rate during deformation. The microstructure evolution and strain-hardening behavior of Fe18Mn0.6C1.5Al TWIP steel in uniaxial tension were examined. The purpose...

  • Investigations of microstructure of thin TbFeCo films by high-resolution electron microscopy (abstract). Li, Z. G.; Smith, David J.; Marinero, E. E. // Journal of Applied Physics;5/1/1990, Vol. 67 Issue 9, p5954 

    Presents an abstract of the study 'Investigations of Microstructure of Thin TbFeCo Films by High-Resolution Electron Microscopy,' by Z.G. Li, David J. Smith and E.E. Marinero.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics