TITLE

Antiresonant reflecting optical waveguides in strip configuration

AUTHOR(S)
Gehler, J.; Brauer, A.
PUB. DATE
January 1994
SOURCE
Applied Physics Letters;1/17/1994, Vol. 64 Issue 3, p276
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the antiresonant reflecting optical waveguides (ARROW) in strip configuration. Provision of strip-loaded reflectors to the lateral confinement; Use of reactive ion beam etching in the fabrication process; Implication of the ARROW monomodal property for optical fiber matching capability and polarization degree design control.
ACCESSION #
4284392

 

Related Articles

  • Magneto-optic buried channel waveguides for a 45 degrees nonreciprocal waveguide rotator. Sugimoto, N.; Katoh, Y. // Applied Physics Letters;11/15/1993, Vol. 63 Issue 20, p2744 

    Examines the generation of an optical isolation ratio in a magneto-optic buried channel waveguides. Regulation of the core ridge width and height with argon ion-beam etching technique; Growth of the core and cladding layers; Fabrication of a 45 degrees waveguide rotator exhibiting a near-field...

  • Optical waveguides produced in LiF by MeV ion beam bombardment. Cremona, M.; Pereira, J. A. M.; Pelli, S.; Righini, G. C. // Applied Physics Letters;11/25/2002, Vol. 81 Issue 22, p4103 

    In this letter, the development of a simple method, based on high-energy light-ion beam irradiation, to create active waveguides in alkali halide materials is reported. A 1.1 MeV He[SUP+] beam at normal incidence was used to irradiate lithium fluoride crystals, with different ion doses varying...

  • Effects of ion beam and electron cyclotron resonance etch-induced damage on the optical properties of multiple quantum well structures. Bensaoula, A. H.; Bensaoula, A.; Freundlich, A. // Journal of Applied Physics;3/15/1994, Vol. 75 Issue 6, p2818 

    Focuses on a study which assessed the relative damage induced by ion beam etch technique and the electron cyclotron resonance etch technique on gallium arsenide/aluminum gallium arsenide semiconducting materials. Experimental setup; Ion energy dependence of the ion-induced damage to the optical...

  • Reactive ion beam etching of aluminum indium antimonide, gallium indium antimonide.... Sendra, J.R.; Anguita, J. // Applied Physics Letters;11/27/1995, Vol. 67 Issue 22, p3289 

    Performs a reactive ion beam etching of gallium indium antimonide, aluminum indium antimonide heterostuctures in electron cyclotron resonance plasma. Avoidance of the formation of InCl[sub x] layer on the etched surface; Smoothness of the etched surfaces; Fabrication of infrared photodiodes...

  • Patterning of fine structures in silicon dioxide layers by ion beam exposure and wet chemical etching. Cleaver, J. R. A.; Heard, P. J.; Evason, A. F.; Ahmed, H. // Applied Physics Letters;9/15/1986, Vol. 49 Issue 11, p654 

    Fine structures can be fabricated in silicon dioxide layers by a two-stage process in which localized ion implantation enhances the rate at which the oxide can be etched chemically. This process has been investigated as a technique for maskless microfabrication using a scanning ion beam...

  • Reactive ion beam etching of Y-Ba-Cu-O superconductors. Matsui, S.; Takado, N.; Tsuge, H.; Asakawa, K. // Applied Physics Letters;1/4/88, Vol. 52 Issue 1, p69 

    It has been found that a reactive ion beam etching (RIBE) using Cl2 gas is useful for microfabrication of Y-Ba-Cu-O superconductors. The etching yield enhancement of Y-Ba-Cu-O is observed for Cl2 RIBE. The etching yield of Y-Ba-Cu-O at 400 V accelerating voltage, 2×10-3 Torr Cl2 pressure for...

  • Ion sources for dry etching: Aspects of reactive ion beam etching for Si technology (invited)a). Scheer, H. -C. // Review of Scientific Instruments;May92, Vol. 63 Issue 5, p3050 

    Aspects of ion beam sources are treated which emerge from their use for reactive ion beam etching (RIBE) in silicon VLSI technology. As a basis for this treatment, the requirements for dry etching for VLSI are elaborated, as well as the consequences of these requirements for ion beam sources to...

  • Optical depth profiling of ion beam etching induced damage in InGaAs/InP heterostructures. Germann, R.; Forchel, A.; Grützmacher, D. // Applied Physics Letters;11/20/1989, Vol. 55 Issue 21, p2196 

    We have investigated the energy dependence and depth distribution of the damage caused by ion beam etching using Ar/O2-ions with energies in the range between 175 and 1200 eV. The damage was created by partially etching the upper InP barrier of In0.53Ga0.47As single quantum wells. The optical...

  • The influence of substrate topography on ion bombardment in plasma etching. Ingram, S. G. // Journal of Applied Physics;7/15/1990, Vol. 68 Issue 2, p500 

    Presents a study which investigated the influence of substrate topography on ion bombardment in plasma etching. Development of a model of the electric field structure; Calculation of the electric field; Results and discussion; Conclusion.

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics