TITLE

Design concept and performance considerations for fast high power semiconductor switching

AUTHOR(S)
Goto, Tatsumi; Kakizaki, Kouji; Takagi, Shigeyuki; Satoh, Saburoh; Shinohe, Takashi; Ohashi, Hiromichi; Endo, Fumiko; Okamura, Katsuya; Ishii, Akira; Teranishi, Tsuneharu
PUB. DATE
July 1997
SOURCE
Review of Scientific Instruments;Jul97, Vol. 68 Issue 7, p2658
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Describes the development of a semiconductor switching power supply in which a novel structure semiconductor device, a metal oxide semiconductor assisted gate-triggered thyristor was incorporated with a single stage magnetic pulse compression circuit. Design concept of the power supply; Design and evaluation of the semiconductor switching device.
ACCESSION #
4272729

 

Related Articles

  • Rectifier ICs and Thermal Packaging Enhance SMPS. Battello, Mario // Power Electronics Technology;May2006, Vol. 32 Issue 5, p24 

    The article presents information on new synchronous rectification controllers and thermally enhanced device package, which play an important role in minimizing the efficiency of the switched-mode power supply in personal computers. The new secondary control techniques and stepdown converters...

  • Switching Characteristics of Electron-Irradiated MOS-Controlled Thyristors. Chernyavskiı, E. V.; Popov, V. P.; Pakhmutov, Yu. S.; Krasnikov, Yu. I.; Safronov, L. N. // Semiconductors;Sep2001, Vol. 35 Issue 9, p1106 

    MOS-controlled thyristors (MCTs) were designed and fabricated. The effect of electron irradiation on static and dynamic characteristics has been studied. Electron irradiation was found to substantially reduce the MCT turn-off time. An increase in the controlled current density was observed.

  • design ideas. English, Michael; Travis, Bill // EDN;10/14/2004, Vol. 49 Issue 21, p105 

    This article offers information on the MIC4451, a power-metal oxide semiconductor field effect transistor (MOSFET) gate driver, which can also be used as negative-voltage power-side switch. It provides complementary, low-on-resistance MOSFET switches to connect a system power-supply rail to a...

  • Design of CMOS Sawtooth Wave Oscillator for Switching Power Supply. Zhu Lei Shao // Advanced Materials Research;2014, Vol. 960-961, p1268 

    Based on the CMOS technology, the sawtooth wave oscillator used in switching power supply is designed. In the condition of 27°C and 4 V power supply voltage, the oscillation frequency of sawtooth wave oscillator is 246.61 KHz. The oscillation frequency of sawtooth wave oscillator changes...

  • Milestones In POWER MOSFETs. Lidow, Alex // EDN;3/1/2007, Vol. 52 Issue 5, Special section p16 

    The article highlights the milestones in power metal oxide semiconductor field-effect transistors (MOSFET) development in the last thirty years. Prior to the said period, linear designs and bipolar transistors were considered state-of-the-art technology in relation to power-management. The first...

  • MOSFET Selection For Switching Power Supply Systems. Perry, Jeff // Power Electronics Technology;Apr2012, Vol. 38 Issue 4, p26 

    The article focuses on the significance of WEBENCH®Power Architect online design tool from Texas Instruments Inc. to the efficiency of metal semiconductors field-effect transistors (MOSFET) selection in power supply system. It mentions that WEBENCH® allows users to view various scenarios...

  • Protect MOSFETs in heavy-duty inductive switch-mode circuits. Štofka, Marián // EDN;2/3/2011, Vol. 56 Issue 3, p44 

    The article discusses how to protect the metal-oxide-semiconductor field-effect transistor (MOSFET) power switch in heavy-duty inductive switch-mode circuits. It claims that to protect the MOSFET, the duty cycle of the circuit should be limited by alternating current (AC) coupling the FET-driver...

  • Design and Verification of a High Performance LED Driver with an Efficient Current Sensing Architecture. Jin He; Wing Yan Leung; Tsz Yin Man; Lin He; Hailang Liang; Aixi Zhang; Qingxing He; Caixia Du; Xiaomeng He; Mansun Chan // Circuits & Systems;Sep2013, Vol. 4 Issue 5, p393 

    A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacitor voltage and maintained by a feedback. The circuit has been fabricated in a...

  • Miniaturizing switch-mode power conversion technology. Lotfi, Ashraf // Portable Design;Nov2005, Vol. 11 Issue 11, p10 

    The article discusses ways that electronic designers will be able to achieve a power conversion solution that meets the high-performance levels, reduced real estate requirements, and appropriate cost structures that end users demand. There are existing and promising new materials and devices...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics