TITLE

Effective surface resistance of LuBa[sub 2]Cu[sub 3]O[sub 7-delta] thin films

AUTHOR(S)
Pinto, R.; Chourey, A.G.
PUB. DATE
April 1994
SOURCE
Applied Physics Letters;4/18/1994, Vol. 64 Issue 16, p2166
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the surface resistance of LuBa[sub 2]Cu[sub 3]O[sub 7-delta] thin films grown on LaAlO[sub 3] by pulsed laser deposition. Use of microstrip resonator technique to assess the surface resistance; Details on critical current density and film thickness; Existence of strain caused by ionic radius of luthenium.
ACCESSION #
4272543

 

Related Articles

  • Off-axis laser deposition of YBa[sub 2]Cu[sub 3]O[sub 7 - delta] thin films. Holzapfel, B.; Roas, B. // Applied Physics Letters;12/28/1992, Vol. 61 Issue 26, p3178 

    Examines the Yba[sub 2]Cu[sub 3]O[sub 7-delta] (YBCO) thin-film preparation by laser deposition geometry. Modification of laser deposition by substrate orientation change; Rotation of the substrate to obtain uniform temperature; Measurement of the critical current density in YBCO films.

  • Growth of HgBa[sub 2]Ca[sub 2]Cu[sub 3]O[sub 8] thin films using stable Re[sub 0.1]Ba[sub 2]Ca[sub 2]Cu[sub 3]O[sub x] precursor by pulsed laser deposition. Kang, W. N.; Meng, R. L.; Chu, C. W. // Applied Physics Letters;7/20/1998, Vol. 73 Issue 3 

    High quality c-axis oriented HgBa[sub 2]Ca[sub 2]Cu[sub 3]O[sub 8] thin films have been fabricated with the stable Re-doped Ba[sub 2]Ca[sub 2]Cu[sub 3]O[sub x] precursor powder by pulsed laser deposition followed by postannealing without any special handling. As-grown films on (100) SrTiO[sub 3]...

  • Preparation of KTN Films on Single Crystal Quartz Substrates. Zhang, D. M.; Li, Z. H.; Zhang, M. J.; Wang, X. D.; Huang, M. T.; Yu, B. M.; Xu, D. S.; Wang, Y. M. // American Ceramic Society Bulletin;Feb2001, Vol. 80 Issue 2, p57 

    Focuses on the preparation of high-orientation KTN films on single crystal quartz substrates. Control of laser energy density and annealing temperature; Interaction between interfaces and the generation of interphase pyrochlore; Advantages of the pulsed laser deposition technique.

  • Matrix assisted pulsed laser deposition of melanin thin films. Bloisi, F.; Pezzella, A.; Barra, M.; Chiarella, F.; Cassinese, A.; Vicari, L. // Journal of Applied Physics;Jul2011, Vol. 110 Issue 2, p026105 

    Melanins constitute a very important class of organic pigments, recently emerging as a potential material for a new generation of bioinspired biocompatible electrically active devices. In this paper, we report about the deposition of synthetic melanin films starting from aqueous suspensions by...

  • Relation between the critical current and the n value of ReBCO thin films: A scaling law for flux pinning of ReBCO thin films. Oh, Sangjun; Choi, Heekyung; Lee, Chulhee; Lee, Sangmoo; Yoo, Jaeun; Youm, Dojun; Yamada, H.; Yamasaki, H. // Journal of Applied Physics;8/15/2007, Vol. 102 Issue 4, p043904 

    Detailed field and angle dependencies of the critical current and the n value for a SmBCO coated conductor have been measured. It was found that the field dependence of the n value can be fitted by an empirical power law with three parameters including the irreversibility field. We also found...

  • Growth of Bi2Sr2CaCu2O8+δ thin films with enhanced superconducting properties by incorporating CaIrO3 nanoparticles. De Vero, J. C.; Hwang, I.; Santiago, A. C. L.; Chang, J.; Kim, J.; Sarmago, R. V.; Song, J. H. // Applied Physics Letters;4/28/2014, Vol. 104 Issue 17, p1 

    We synthesized Bi2Sr2CaCu2O8+δ (Bi-2212) thin films with incorporated CaIrO3 (Ca-iridate) nanoparticles, by using pulsed laser deposition and post-growth ex situ annealing. We found that the density of incorporated Ca-iridate strongly affected the superconducting properties and microstructure...

  • Flux pinning properties of YBCO/DyBCO multilayers. Develos-Bagarinao, K.; Yamasaki, H.; Ohki, K. // Journal of Applied Physics;Sep2008, Vol. 104 Issue 6, p063907 

    Multilayered structures of YBa2Cu3O7-δ (YBCO) interlayered with thin layers of DyBa2Cu3O7-δ (DyBCO) were prepared on CeO2-buffered r-cut sapphire (Al2O3) substrates by pulsed laser deposition. Evaluation of the magnetic-field angular dependence of the critical current density [Jc(H,θ)]...

  • Mechanisms for enhanced supercurrent across meandered grain boundaries in high-temperature superconductors. Feldmann, D. M.; Holesinger, T. G.; Feenstra, R.; Cantoni, C.; Zhang, W.; Rupich, M.; Li, X.; Durrell, J. H.; Gurevich, A.; Larbalestier, D. C. // Journal of Applied Physics;Oct2007, Vol. 102 Issue 8, p083912 

    It has been well established that the critical current density Jc across grain boundaries (GBs) in high-temperature superconductors decreases exponentially with misorientation angle θ beyond ∼2°–3°. This rapid decrease is due to a suppression of the superconducting order...

  • Relation between crystallinity and chemical nature of surface on wettability: A study on pulsed laser deposited TiO2 thin films. Shirolkar, Mandar M.; Phase, Deodatta; Sathe, Vasant; Rodríguez-Carvajal, J.; Choudhary, Ram Janay; Kulkarni, Sulabha K. // Journal of Applied Physics;Jun2011, Vol. 109 Issue 12, p123512 

    Pure titania (TiO2) polycrystalline thin films in rutile, anatase and mixed phase have been grown on amorphous glass substrates by pulsed laser deposition method at various oxygen gas pressure. Wettability investigations have been carried out on these films. Consistent with our previous report...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics