TITLE

Heavy ion beam pumped visible laser

AUTHOR(S)
Ulrich, A.; Wieser, J.
PUB. DATE
April 1994
SOURCE
Applied Physics Letters;4/11/1994, Vol. 64 Issue 15, p1902
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Observes heavy ion beam pumped laser action in the visible spectral range. Effect on the potential development of shorter wavelength lasers pumped by heavy ion beams; Values of the laser gas pressure; Obtainment of quasicontinuous laser action using a chopped beam.
ACCESSION #
4272455

 

Related Articles

  • Surface-emitting GaAs/AlGaAs lasers with dry-etched 45° total reflection mirrors. Hamao, N.; Sugimoto, M.; Takado, N.; Tashiro, Y.; Iwata, H.; Yuasa, T.; Asakawa, K. // Applied Physics Letters;6/12/1989, Vol. 54 Issue 24, p2389 

    Surface-emitting GaAs/AlGaAs lasers with 45° total reflection mirrors have been successfully produced using a 45° tilted reactive ion beam etching technique. The ratio of surface-emitted light output power to edge-emitted light output power was obtained at values as high as 77%. The total...

  • Characterization of AlGaInN diode lasers with mirrors from chemically assisted ion beam etching. Kneissl, M.; Bour, D. P.; Johnson, N. M.; Romano, L. T.; Krusor, B. S.; Donaldson, R.; Walker, J.; Dunnrowicz, C. // Applied Physics Letters;3/30/1998, Vol. 72 Issue 13 

    Current-injection InGaAlN heterostructure laser diodes grown by metalorganic chemical vapor deposition on sapphire substrates are demonstrated with mirrors fabricated by chemically assisted ion beam etching. Due to the independent control of physical and chemical etching, smooth vertical...

  • InGaAsP/InP horizontal cavity surface-emitting lasers radiating in two opposite directions. Wakabayashi, S.; Mutoh, K. // Applied Physics Letters;9/28/1992, Vol. 61 Issue 13, p1499 

    Demonstrates a InGaAsP/InP horizontal cavity surface-emitting laser. Components and structure of the laser device; Fabrication of mirror facets using reactive ion-beam etching process; Values for the threshold current and output power achieved at room temperature; Orientation of the laser...

  • Self-aligned coupled cavity GaAs/AlGaAs midinfrared quantum-cascade laser. Hvozdara, L.; Lugstein, A.; Gianordoli, S.; Schrenk, W.; Strasser, G.; Unterrainer, K.; Bertagnolli, E.; Gornik, E. // Applied Physics Letters;8/21/2000, Vol. 77 Issue 8 

    A monolithic GaAs/AlGaAs quantum-cascade laser with self-aligned focused ion beam-cut coupled cavities, emitting in the range of λ=9.4 μm is demonstrated. Separate pulsing of two optically coupled laser sections enables control of the lasing in single-mode and in multimode regimes. Side...

  • Intracavity multipass system for generation of high flux of cw visible light. Anheier, N. C.; Labiche, M. J.; Graff, M. M. // Review of Scientific Instruments;Sep89, Vol. 60 Issue 9, p3080 

    We describe an intracavity multipass system (IMS) for producing very high cw flux of visible light with ion lasers. Multiple crossings of an ion beam with the extended cavity of an argon-ion laser produce effective photodetachment laser powers well over 1 kW when a high-reflectance output...

  • High power cw operation of GaAs/GaAlAs surface-emitting lasers mounted in the junction-up.... Ou, S.S.; Jansen, M.; Yang, J.J.; Sergant, M. // Applied Physics Letters;8/26/1991, Vol. 59 Issue 9, p1037 

    Demonstrates the operation of a GaAs/GaAlAs surface-emitting laser mounted in the junction-up configuration. Fabrication of the device mirrors by ion beam etching and reactive ion beam etching; Measurement of the typical threshold current density and external differential efficiencies from the...

  • Operating characteristics and elevated temperature lifetests of focused ion beam micromachined transverse junction stripe lasers. DeFreez, R. K.; Puretz, J.; Orloff, J.; Elliott, R. A.; Namba, H.; Omura, E.; Namizaki, H. // Applied Physics Letters;9/26/1988, Vol. 53 Issue 13, p1153 

    The operating characteristics of transverse junction stripe diode lasers with focused ion beam micromachined mirrors are shown to be comparable to those with cleaved facet mirrors. Stable cw operation for more than 2200 h was observed in an aging test at 55 °C.

  • Fast ion beam laser spectroscopy of N2O+: Observation and interpretation of the Fermi resonance in the 100 2Π vibronic level of the ground state. Chafik el Idrissi, M.; Larzilliere, M.; Carré, M. // Journal of Chemical Physics;1/1/1994, Vol. 100 Issue 1, p204 

    We present the analysis of the 100 A 2Σ–100 X 2Π3/2 band of N2O+ observed by fast ion beam laser spectroscopy. The obtained spectrum allowed us to interpret the Fermi interaction effects in the X 2Π ground state. The two Fermi parameters W1 and W2 were determined for the first...

  • Energy partitioning in Ar++O2 collisions at low energies: Analysis of product states by laser-induced predissociation. Scherbarth, S.; Gerlich, D. // Journal of Chemical Physics;2/1/1989, Vol. 90 Issue 3, p1610 

    Combining the versatility of a guided ion beam (GIB) apparatus with a tunable dye laser system, we have studied in detail the ion–molecule reaction Ar++O2→O+2+Ar at collision energies ranging from 0.04 to 3 eV center of mass (c.m.). The results include integral cross sections and...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics