Development of chemical vapor deposition diamond burrs using hot filament

Trava-Airoldi, V.J.; Corat, E.J.; Pena, A.F.V.; Leite, N.F.; Valera, M.C.; Freitas, J.R.; Baranauskas, V.
May 1996
Review of Scientific Instruments;May96, Vol. 67 Issue 5, p1993
Academic Journal
Reports on the fabrication of boring tools (burrs) for dentistry using a hot-chemical vapor deposition system, for forming the diamond abrading structure. Morphology; Heat flow tests in dentine; Effect of number of drillings on factor of merit.


Related Articles

  • Photoluminescence properties of Er[sup 3+]-doped BaTiO[sub 3] thin films. Block, B.A.; Wessels, B.W. // Applied Physics Letters;7/4/1994, Vol. 65 Issue 1, p25 

    Demonstrates the fabrication of Er[sup 3+]-doped BaTiO[sub 3] thin films on Si (100) by metal-organic chemical vapor deposition. Characteristic of Er[sup 3+] intra-4f shell emission at 0.80 eV; Effects of pump power on Er[sup 3+] luminescence intensity; Potentials of Er-doped BaTiO3 as an...

  • The Sheriff Took Our Rig. Cutter, Howard "Porky" // National Driller;Aug2014, Vol. 35 Issue 8, p44 

    A personal narrative is presented which explores the author's experience of getting his drilling rig released from a sheriff who hauled it after accident at author's jobsite in Georgia and adds that accident happened during his visit to South Atlantic Well Drillers Jubilee (SAWDJ), South Carolina.

  • Organic Thin Film Transistor Memories with Carbon Nanodots Fabricated by Focused Ion Beam Chemical Vapor Deposition. Rahim, Ruslinda A.; Hashim, Uda; Fukuda, Hisashi; Tada, Yoshihiro; Wainai, Noriyuki; Uesugi, Katsuhiro; Shimoyama, Yuhei // AIP Conference Proceedings;6/1/2009, Vol. 1136 Issue 1, p297 

    Metal-insulator-semiconductor field effect transistor (MISFET) structures with a nanocrystal carbon (nc-C) embedded in SiO2 thin films using a focused ion beam chemical vapor deposition (FIB-CVD) system with a precursor of low energy Ga+ ion and carbon source to fabricate organic thin film...

  • Experimental study and modeling of the influence of screw dislocations on the performance of Au/n-GaN Schottky diodes. Huang, Y.; Chen, X. D.; Fung, S.; Beling, C.D.; Ling, C.C. // Journal of Applied Physics;11/1/2003, Vol. 94 Issue 9, p5771 

    Current–voltage (I–V) characteristics of macroscopic Schottky diodes fabricated on different GaN templates grown by metalogranic chemical vapor deposition on sapphire substrates were investigated. The number of dislocations under the Au Schottky contact was determined by atomic...

  • Thermal trimming and tuning of hydrogenated amorphous silicon nanophotonic devices. Selvaraja, Shankar Kumar; Bogaerts, Wim; VanThourhout, Dries; Schaekers, Marc // Applied Physics Letters;8/16/2010, Vol. 97 Issue 7, p071120 

    Deposited silicon and, in particular, hydrogenated amorphous silicon forms an attractive alternative platform for realizing compact photonic integrated circuits. In this paper we report on trimming (toward lower wavelengths) and tuning (toward higher wavelengths) of photonic devices through a...

  • Carbide Boring Tools.  // American Machinist;Apr2008, Vol. 152 Issue 4, p9 

    The article evaluates the 0.125-in. diameter, solid carbide qualified length (QL) boring tool from Criterion Machine Works.

  • Punch driver can knock 6-inch hole in conduit.  // Cabling Installation & Maintenance;Jun2011, Vol. 19 Issue 6, p31 

    The article offers brief information on the LS50L battery-powered knockout punch driver from Greenlee.

  • One-man earth drill.  // Rental Equipment Register Exclusive Insight;1/18/2012, p14 

    The article offers information on the HYD-NTV11H UN-Towable drill from Little Beaver.

  • Electric Auger Boring Machine Introduced. Griffin, Jeff // Underground Construction;Sep2013, Vol. 68 Issue 9, p28 

    The article offers a preview of the Thunderbolt 2 electric auger boring machine from the company Boretec Equipment and Sharewell HDD LLC to be featured at the 2013 International Construction and Utility Equipment Exposition (ICUEE) to be held in Louisville, Kentucky from October 1-3, 2013.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics