TITLE

A computer-controlled apparatus for performing high-resolution adsorption isotherms

AUTHOR(S)
Mursic, Z.; Lee, M.Y.M.; Johnson, D.E.; Larese, J.Z.
PUB. DATE
May 1996
SOURCE
Review of Scientific Instruments;May96, Vol. 67 Issue 5, p1886
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Details the construction of a high precision, computer-controlled adsorption isotherm apparatus used to investigate a variety of physisorbed systems. System overview; Gas handling system; Temperature control system; Computer control; System operation.
ACCESSION #
4271654

 

Related Articles

  • Upgrade Biogas Purification in Packed Column with Chemical Absorption of CO2 For Energy Alternative Of Small Industry (UKM-Tahu). Kismurtono, Muhammad // International Journal of Engineering & Technology;Feb2011, Vol. 11 Issue 1, p83 

    The presence of CO2 in biogas does not give to contribute to the colorific or heating value and are often washing out in purification plant in order to obtain a gas with almost 100% (volume/volume) and dangerous effect on environment. Therefore, CO2 must be eliminated from the biogas and the...

  • Characterization of insolubilized humic acid and its sorption behaviors. Chen, Hui; Berndtsson, Ronny; Ma, Mingguang; Zhu, Kun // Environmental Geology;Jun2009, Vol. 57 Issue 8, p1847 

    Insolubilized humic acid (IHA) was prepared in the laboratory by heating approach. Through the comparison between the endothermic peaks, optimal heating temperature was determined to be 330°C. The modified IHA then was characterized by TG-DTA, SEM, FTIR, element analysis, and nitrogen...

  • Thermal runaway in mirowave heated isothermal slabs, cylinders and spheres. Vriezinga, C.A. // Journal of Applied Physics;1/1/1998, Vol. 83 Issue 1, p438 

    Analyzes the absorption of electromagnetic energy within a microwave heated isothermal slab, cylinder, and sphere. Aim of the analysis; Definition of the isothermal cylinder; Discussion and conclusion of the analysis.

  • Emission kinetic of the slow interface states in Si[sub 3]N[sub 4]/In[sub 0.53]Ga[sub 0.47]As... Lopez-Villegas, J.M.; Morante, J.R.; Samitier, J.; Cornet, A.; Renaud, M.; Boher, P. // Applied Physics Letters;3/4/1991, Vol. 58 Issue 9, p919 

    Studies the emission kinetics related to the slow interface states of metal Si[sub3]N[sub4]/In[sub 0.53]Ga[sub 0.47]As structures, by means of analysis of isothermal transients measurements performed at constant capacitance. Presence of two kinds of slow interface states; Occupancy factor of...

  • Experimental determination of a time-temperature-transformation diagram of the undercooled.... Kim, Y.J.; Busch, R. // Applied Physics Letters;2/19/1996, Vol. 68 Issue 8, p1057 

    Focuses on an experimental method to distinguish time-temperature-transformation diagram for the crystallization of certain alloys. Adaptation of issues on undercooling and solidification; Importance of high-temperature high-vacuum electrostatic levitation processing technique in undercooled...

  • THE RESEARCHES OF INFLUENCE OF ALLOYING ON THERMAL STABILITY AND PROCESS OF SENESCENCE OF AMORPHOUS ALLOYS. Lysov, V. I.; Tsaregradskya, T. L.; Turkov, O. V.; Saenko, G. V. // Journal of Physical Studies;2011, Vol. 15 Issue 2, p2704:1 

    The influence of alloying and protracted isothermal storage on thermodynamics stability of amorphous alloys was investigated. By a highly sensitive dilatometric method the experiments for determining the temperature of the beginning of intense crystallization for the obtained alloys and...

  • Al-Cr-Cu (Aluminum-Chromium-Copper). Raghavan, V. // Journal of Phase Equilibria & Diffusion;Feb2012, Vol. 33 Issue 1, p53 

    The article focuses on the isothermal section for the binary and ternary system of aluminum-chromium-copper (Al-Cr-Cu) at 900 degrees Celsius in Al-rich region. It discusses the Al-Cr phase diagram which shows a number of intermediate phases in monoclinic, tetragonal, and orthorhombic. It adds...

  • Ultrasonic cure monitoring of thermosetting materials: Generic data representation using the time-temperature-transformation diagram. Unwin, Marion E.; Challis, Richard E. // AIP Conference Proceedings;2002, Vol. 615 Issue 1, p1750 

    The use of the time-temperature-transformation (TTT) diagram as a form of generic data representation has been investigated in the context of experiments in which ultrasonic wave absorption was used to monitor the cure of a thermoset polymer. It is shown that an ultrasonic version of the TTT...

  • A time-temperature-transformation diagram for the orthorhombic to tetragonal phase transition in YBa2Cu3O7-∂. Shi, D.; Capone II, D. W.; Goretta, K. C.; Zhang, K.; Goudey, G. T. // Journal of Applied Physics;6/1/1988, Vol. 63 Issue 11, p5411 

    Presents a study which established an isothermal transformation curve marking the orthorhombic to tetragonal phase transition boundary over a wide temperature range. Overview of studies on various aspects of YBa[sub2]Cu[sub3]O[sub7-∂] materials; Approach used in weighing and mixing...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics