TITLE

Capacitance measurements of the volume fraction and velocity of dielectric solids near a grounded

AUTHOR(S)
Louge, Michel; Tuccio, Mark; Lander, Eduardo; Connors, Patrick
PUB. DATE
May 1996
SOURCE
Review of Scientific Instruments;May96, Vol. 67 Issue 5, p1869
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Describes capacitance probes that infer the volume fraction of solids near a grounded wall from a measurement of the effective dielectric constant of the suspension. Background; Grounded probe geometry; 'Twin probe' geometry; Tests of the twin probe.
ACCESSION #
4271652

 

Related Articles

  • Determining effective dielectric thicknesses of metal-oxide-semiconductor structures in.... Hu, C.-Y.; Kencke, D.L. // Applied Physics Letters;3/27/1995, Vol. 66 Issue 13, p1638 

    Measures the metal oxide semiconductor (MOS) capacitance in the hole accumulation mode to extract the effective dielectric thickness. Clarification of the discrepancy between experimental data and theoretical prediction by classical MOS theories; Determination of effective dielectric thickness...

  • Improved Calibration Functions of Three Capacitance Probes for the Measurement of Soil Moisture in Tropical Soils. Fares, Ali; Abbas, Farhat; Maria, Domingos; Mair, Alan // Sensors (14248220);2011, Vol. 11 Issue 5, p4858 

    Single capacitance sensors are sensitive to soil property variability. The objectives of this study were to: (i) establish site-specific laboratory calibration equations of three single capacitance sensors (EC-20, EC-10, and ML2x) for tropical soils, and (ii) evaluate the accuracy and precision...

  • Pressure for level. Dunger, Trevor // Process Engineering;Jun2005, Vol. 86 Issue 6, p16 

    Looks into the advantages and disadvantages associated with the three main methods commonly employed for interface level measurement: displacers, capacitance probes and differential pressure transmitters. Questionability of the overall accuracy of displacer type transmitters; Factors that can...

  • Design Of Capacitance Probe Sensor In Deep Hole Diameter Measurement. Ma Yuzhen; Sun Xuan; Zheng Yizhong // Applied Mechanics & Materials;2014, Issue 667-679, p1214 

    Based on the working principle of the capacitive sensor, according to the requirements of deep hole diameter measuring, a capacitance probe sensor was designed, and then the design and type-selection of probe structure, cable inner structure to the capacitance probe sensor were done. At the same...

  • Removal of near-interface traps at SiO2/4H–SiC (0001) interfaces by phosphorus incorporation. Okamoto, Dai; Yano, Hiroshi; Hatayama, Tomoaki; Fuyuki, Takashi // Applied Physics Letters;5/17/2010, Vol. 96 Issue 20, p203508 

    Effective removal of near-interface traps (NITs) in SiO2/4H–SiC (0001) structures through phosphorus incorporation is demonstrated in this paper. Low-temperature capacitance-voltage and thermal dielectric relaxation current measurements were employed to investigate NITs in oxides prepared...

  • Low Capacitance Electrical Probe for Nanoscale Devices and Circuits. Forbes, Leonard; Miller, Drake A.; Jacob, Michael E. // Open Nanoscience Journal;2008, Vol. 2, p39 

    An electrical probe is constructed of a small capacitor in contact with the circuit node under test so as not to load this circuit node and cause distortion of the input signal. The small capacitor is then placed in series with the small input resistance of a terminated coaxial signal line. The...

  • Modified ion sensitive field effect transistor sensors having an extended gate on a thick dielectric. Chang-Geun Ahn; Ansoon Kim; Park, Chan Woo; Chil Seong Ah; Jong-Heon Yang; Tae-Youb Kim; Moongyu Jang; Gun Yong Sung // Applied Physics Letters;5/17/2010, Vol. 96 Issue 20, p203702 

    Modified ion sensitive field effect transistors having an extended gate (EG) on a thick dielectric have been developed to obtain extremely high sensitivity. The capacitance of the EG is controlled to be very small via the thickness of the dielectric layer so that it may be ignored when compared...

  • Resurrecting a capacitor analyzer. Ellis, Marc // Popular Electronics;Nov94, Vol. 11 Issue 11, p68 

    Discusses how to rebuild the capacitor analyzer Sprague Model TO-4 Tel-Ohmike. Function of capacitor analyzers; Finding the equipment; Exploring the TO-4.

  • Peak current query.  // Refrigeration Service & Contracting;Dec96, Vol. 64 Issue 12, p19 

    Responds to inquiries concerning the formula to be used in measuring peak current. Use of RMS amps formula for microfarads measurement with an inductive type of ammeter.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics