TITLE

High-frequency capacitances in resonant interband tunneling diodes

AUTHOR(S)
Fobelets, K.; Vounckx, R.
PUB. DATE
May 1994
SOURCE
Applied Physics Letters;5/9/1994, Vol. 64 Issue 19, p2523
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Determines the junction capacitance in resonant interband tunneling diodes using microwave impedance measurements and network parameter extraction. Difference between the shape of capacitance and resonant tunneling diodes; Conductance characteristics of the device; Different transport mechanisms in resonant interband tunneling diodes.
ACCESSION #
4266414

 

Related Articles

  • Effect of back contact impedance on frequency dependence of capacitance-voltage measurements on.... Venkatesan, V.; Das, K.; von Windheim, J.A.; Geis, M.W. // Applied Physics Letters;8/23/1993, Vol. 63 Issue 8, p1065 

    Describes the effect of back contact impedance on frequency dependence of capacitance-voltage measurements on metal/diamond diodes. Decrease of frequency dependence upon back contact impedance reduction; Identicalness of capacitance and frequency data for aluminum and platinum contacts; Absence...

  • The group expert evaluation of the state of metrological assurance of capacitance measurements. Velychko, Oleh; Shevkun, Sergiy; Karpenko, Stanislav // Metallurgical & Mining Industry;2016, Issue 11, p77 

    The measurement of the impedance of devices and transmission lines is a practical problem in technology and other fields. Measurements of capacity are used in metallurgical and mining industry. The results of group expert evaluation of metrological assurance of capacitance measurements with...

  • AMPERA'S CAPACITANCE.  // Power Engineering;Jan2001, Vol. 105 Issue 1, p72 

    Presents an article on the capacitance of amperes. Causes of impedance and short circuits.

  • Equivalent circuit and capacitance of double barrier resonant tunneling diode. Wei, T.; Stapleton, S.; Berolo, E. // Journal of Applied Physics;1/15/1993, Vol. 73 Issue 2, p829 

    Presents a study which obtained the small signal impedances of double barrier resonant tunneling diodes up to 18 gigahertz by measuring the scattering parameters with on-wafer probing techniques. Properties of resonant tunneling diodes; Experimental procedures applied; Results and discussions.

  • Effect of the Coulomb interaction on the response time and impedance of the resonant-tunneling diodes. Feiginov, Michael N. // Applied Physics Letters;5/15/2000, Vol. 76 Issue 20 

    We demonstrated that the response time of the resonant-tunneling structures (Ï„[sub resp]) can be much smaller as well as much larger than the quasibound-state lifetime. A simple analytical expression for the impedance of the resonant-tunneling diode has been derived, it takes into account...

  • A 10:1 UNEQUAL GYSEL POWER DIVIDER USING A CAPACITIVE LOADED TRANSMISSION LINE. Kim, Y. // Progress in Electromagnetics Research Letters;2012, Vol. 32, p1 

    This paper proposes a 10 : 1 unequal Gysel power divider using a capacitive loaded transmission line (CLTL). For obtaining a high dividing ratio of divider, the CLTL is proposed to realize a low characteristic impedance line below 10 Ω. A design method using a CLTL which consists of a small...

  • An automatic precision system for the metrological backup of measurements of impedance parameters. Part. 1. Operating principles. Surdu, M.; Lameko, A.; Surdu, D.; Kursin, S. // Measurement Techniques;Oct2012, Vol. 55 Issue 7, p816 

    A system for reproducing and transferring the units of impedance parameters, including a set of precision automatic comparators and thermostatted measures-carriers is described. The apparatus enables the dimensions of any parameters of impedance to be transferred for any value of the loss...

  • Comparison of three current sources for single-electrode capacitance measurement. Chen, D. X.; Deng, X.; Yang, W. Q. // Review of Scientific Instruments;Mar2010, Vol. 81 Issue 3, p034704 

    The capacitance of a single electrode is usually measured by injecting a current to the electrode and measuring the resultant voltage on the electrode. In this case, a voltage-controlled current source with a high bandwidth is needed because the impedance is inversely proportional to the...

  • Semiconducting behavior of passive film formed on stainless steel in borate buffer solution containing sulfide. Ge, Hong-Hua; Xu, Xue-Min; Zhao, Li; Song, Fei; Shen, Jing; Zhou, Guo-Ding // Journal of Applied Electrochemistry;May2011, Vol. 41 Issue 5, p519 

    The semiconducting behavior of passive film formed on 316L stainless steel in borate buffer solution containing sulfide was studied by capacitance measurements (Mott-Schottky approach), electrochemical impedance spectroscopy and potentio dynamic polarization curves. The results reveal that the...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics