TITLE

Semiconducting polymer diodes: Large size, low cost photodetectors with excellent

AUTHOR(S)
Yu, G.; Pakbaz, K.
PUB. DATE
June 1994
SOURCE
Applied Physics Letters;6/20/1994, Vol. 64 Issue 25, p3422
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the sensitivity of photodiodes fabricated from conjugated polymers to visible-ultraviolet (UV) radiation. Correlation of photosensitivity with reverse bias voltage; Photoresponse of diodes fabricated from poly(3-octyl thiopene) in the visible and near UV; Effect of the ease of fabrication into large size on the polymer photodiode.
ACCESSION #
4258372

 

Related Articles

  • Multilayer green polymer light emitting diodes with improved efficiency and lifetime. Li, J.; Sano, T.; Hirayama, Y.; Tomita, T.; Fujii, H.; Wakisaka, K. // Journal of Applied Physics;8/1/2006, Vol. 100 Issue 3, p034506 

    We report on green polymer light emitting diodes with improved efficiency and lifetime using a cross-linked hole transporting layer in this study. The poly[(9,9-dioctylfluorene)-alt-(triphenylamine)], which was used as a hole transporting material, was cross-linked by UV irradiation. The...

  • Holographic Nano-Patterning Based On Photo-Cross-Linkable Light Emitting Polyacetylenes. Lijun Wu; Tong, Woody Y. Y.; Kam Sing Wong; Jianli Hua; Häußler, Matthias; Ben Zhong Tang // AIP Conference Proceedings;2007, Vol. 893 Issue 1, p367 

    Blue light-emitting poly(1-phenyl-1-alkyne)s containing photo-cross-linkable vinyl pendants were synthesized and photophysically characterized. Photoluminescence quantum yields are virtually unchanged for pristine and photo-cross-linked films showing excellent stability and light emitting...

  • Ultraviolet nanoimprinted polymer nanostructure for organic light emitting diode application. Sohee Jeon; Jae-Wook Kang; Hyung-Dol Park; Jang-Joo Kim; Youn, Jae R.; Jongyoup Shim; Jun-ho Jeong; Dae-Geun Choi; Ki-Don Kim; Altun, Ali Ozhan; Se-Heon Kim; Yong-Hee Lee // Applied Physics Letters;6/2/2008, Vol. 92 Issue 22, p223307 

    Light extraction efficiency of a conventional organic light emitting diode (OLED) remains limited to approximately 20% as most of the emission is trapped in the waveguide and glass modes. An etchless simple method was developed to fabricate two-dimensional nanostructures on glass substrate...

  • Effects of ultraviolet light irradiation on poly(vinlycarbazole). Qian, Lei; Bera, Debasis; Holloway, Paul H. // Applied Physics Letters;2/4/2008, Vol. 92 Issue 5, p053303 

    In this paper, we present a study of the photophysical and photochemical effects that influence phosphor-doped polymer light-emitting diodes based on poly(vinlycarbazole). With ultraviolet (UV) light irradiation, the relative concentration of partially overlapping carbazole groups...

  • Submilliwatt operation of AlGaN-based ultraviolet light-emitting diode using short-period alloy superlattice. Nishida, T.; Saito, H.; Kobayashi, N. // Applied Physics Letters;1/22/2001, Vol. 78 Issue 4, p399 

    Over 0.1 mW ultraviolet output was achieved by an AlGaN-based light-emitting diode. To realize a highly conductive and ultraviolet-transparent layer, a short-period alloy superlattice was introduced. The device was fabricated on SiC substrate. Low electric resistivity due to the short-period...

  • Combinatorial fabrication and studies of intense efficient ultraviolet–violet organic light-emitting device arrays. Zou, L.; Savvate’ev, V.; Booher, J.; Kim, C.-H.; Shinar, J. // Applied Physics Letters;10/1/2001, Vol. 79 Issue 14, p2282 

    Arrays of ultraviolet–violet (indium tin oxide)/[copper phthalocyanine (CuPc)]/[4,4′-bis(9-carbazolyl)biphenyl (CBP)]/[2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4oxadiazole (Bu-PBD)]/CsF/Al organic light-emitting devices, fabricated combinatorially using a sliding shutter...

  • Effect of ionization potential change in poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) on the performance of polymer light emitting diodes due to its reaction with indium tin oxide. Chang, Chih-Hao; Chen, Show-An // Applied Physics Letters;9/3/2007, Vol. 91 Issue 10, p103514 

    Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) is usually used to facilitate hole injection in polymer light emitting diodes. The authors used ultraviolet photoelectron spectroscopy to investigate ionization potential (IP) changes of PEDOT:PSS spin coated on indium tin...

  • Highly transparent polymer light-emitting diode using modified aluminum-doped zinc oxide top electrode. Heum Park, Sung; Hoon Lee, Byoung; Moon Shin, Jong; Jeong, Se-Young; Song, Suhee; Suh, Hongsuk; Lee, Kwanghee // Applied Physics Letters;3/26/2012, Vol. 100 Issue 13, p133306 

    We report a novel approach that leads to a significant improvement in the performance of transparent polymer light-emitting diodes (TPLEDs). By introducing a solution-based titanium oxide (TiOx) layer, we have demonstrated that the device performance of TPLEDs using aluminum-doped zinc oxide...

  • Polysilane based organic light emitting diodes: Simultaneous ultraviolet and visible emission. Sharma, Asha; Katiyar, Monica; Deepak; Seki, Shu // Journal of Applied Physics;Oct2007, Vol. 102 Issue 8, p084506 

    While most organic light emitting diodes are designed to emit in the visible region, we report a series of polysilane based diodes for developing ultraviolet emitters at room temperature. These reported devices can also be controlled to simultaneously emit both ultraviolet and visible light,...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics