TITLE

Iodine doping in mercury cadmium telluride (Hg[sub 1-x]CD[sub x]Te) grown by direct alloy growth

AUTHOR(S)
Murakami, S.; Okamoto, T.
PUB. DATE
August 1993
SOURCE
Applied Physics Letters;8/16/1993, Vol. 63 Issue 7, p899
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the iodine doping of mercury cadmium telluride fabricated by direct alloy growth using metalorganic chemical vapor deposition. Use of isopropyl-iodine as the dopant source; Confirmation of sharp dopant transitions by secondary ion mass spectroscopy measurement; Electron mobility and electrical properties of the layer.
ACCESSION #
4258230

 

Related Articles

  • HgCdTe on GaAs/Si for mid-wavelength infrared focal plane arrays. Zanio, Ken; Bean, Ross; Mattson, Reed; Vu, Paul; Taylor, Scott; McIntyre, Dave; Ito, Chris; Chu, Muren // Applied Physics Letters;3/26/1990, Vol. 56 Issue 13, p1207 

    Mid-wavelength HgCdTe was grown by metalorganic chemical vapor deposition at 390 °C on CdTe/GaAs/Si substrates. Resistance-area products as high as 107 Ω cm2 were measured for 320×5 arrays of detectors having a λco of 4.6 μm at 77 K. Rudimentary thermal imaging was demonstrated...

  • Reduction of Hg1-xCdxTe native oxide during the SiNx deposition process. Sudo, G.; Kajihara, N.; Miyamoto, Y.; Tanikawa, K. // Applied Physics Letters;11/9/1987, Vol. 51 Issue 19, p1521 

    Electron cyclotron resonance plasma chemical vapor deposition enables low-temperature SiNx deposition on Hg1-xCdxTe (MCT). The SiNx film has an excellent interface on MCT with a low surface state density of 1.0×1011 cm-2 eV-1 and a low fixed charge of -1.4×1011 cm-2. A detailed analysis...

  • Photochemical organometallic vapor phase epitaxy of mercury cadmium telluride. Morris, B. J. // Applied Physics Letters;3/31/1986, Vol. 48 Issue 13, p867 

    Mercury cadmium telluride has been successfully grown by the photolysis of dimethylmercury, dimethylcadmium, and dimethyltelluride, using an ArF excimer laser operating at 193 nm as the radiation source. Growths were accomplished on CdTe substrates at a temperature of 150 °C, with a growth...

  • Photoconductive Hg1-xCdxTe detectors grown by low-temperature metalorganic chemical vapor deposition. Bethea, C. G.; Levine, B. F.; Lu, P.-Y.; Williams, L. M.; Ross, M. H. // Applied Physics Letters;10/24/1988, Vol. 53 Issue 17, p1629 

    We have fabricated high-sensitivity Hg1-xCdxTe detectors from low-temperature metalorganic vapor deposition samples. Responsivities of R=2000 V/W and detectivities of D*=2×1010 cm Hz1/2/W have been achieved.

  • Extrinsic p-type doping of HgCdTe grown by organometallic epitaxy. Ghandhi, S. K.; Taskar, N. R.; Parat, K. K.; Terry, D.; Bhat, I. B. // Applied Physics Letters;10/24/1988, Vol. 53 Issue 17, p1641 

    In this letter, we report on the extrinsic p-type doping of mercury cadmium telluride (MCT), during growth by organometallic vapor phase epitaxy. Arsine gas in hydrogen was used as the dopant source. The layers were characterized by Hall effect and by resistivity measurements over the...

  • Surface Passivation of HgCdTe Using Low-Pressure Chemical Vapor Deposition of CdTe. Banerjee, Sneha; Su, Peng-Yu; Dahal, Rajendra; Bhat, Ishwara; Bergeson, Jeremy; Blissett, Caleb; Aqariden, Fikri; Hanyaloglu, Bengi // Journal of Electronic Materials;Aug2014, Vol. 43 Issue 8, p3012 

    CdTe passivation films have been deposited on HgCdTe ( x = 0.35) samples used for infrared detectors by low-pressure chemical vapor deposition (LPCVD) and atomic layer deposition (ALD) at temperatures as low as 135°C to 170°C. ALD has been used to deposit an initially uniform starting...

  • Donor doping in metalorganic chemical vapor deposition of HgCdTe using ethyl iodide. Mitra, P.; Tyan, Y.L. // Applied Physics Letters;7/11/1994, Vol. 65 Issue 2, p195 

    Examines donor doping of mercury cadmium telluride during metalorganic chemical vapor deposition using ethyl iodide. Mechanism of regulating the doping levels; Activation of the iodine as a singly ionized donor; Rate of electron mobilities at 80 and 20 Kelvin.

  • Processing and Characterization of a-Si:H Photoresists for a Vacuum-Compatible Photolithography Process. Jacobs, R. N.; Stoltz, A. J.; Robinson, E. W.; Boyd, P. R.; Almeida, L. A.; Dinan, J. H.; Salamanca-Riba, L. // Journal of Electronic Materials;Jun2004, Vol. 33 Issue 6, p538 

    The vision of achieving a completely in-vacuum process for fabricating HgCdTe detector arrays is contingent on the availability of a vacuum-compatible photolithography technology. One such technology for vacuum photolithography involves the use of amorphous-hydrogenated Si (a-Si:H) as a...

  • A Novel Method to Obtain Higher Deposition Rates of CdTe Using Low Temperature LPCVD for Surface Passivation of HgCdTe. Banerjee, Sneha; Dahal, Rajendra; Bhat, Ishwara // Journal of Electronic Materials;Sep2015, Vol. 44 Issue 9, p3023 

    The deposition rate of CdTe passivation films has been increased greatly by the implementation of a novel design of a graphite cracker cell. This cracker cell, consisting of an integrated diffuser, facilitates the efficient cracking of precursors. CdTe deposition rate has been increased from ~50...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics