TITLE

Resonant holographic interferometry of laser-ablation plumes

AUTHOR(S)
Lindley, R.A.; Gilgenbach, R.M.
PUB. DATE
August 1993
SOURCE
Applied Physics Letters;8/16/1993, Vol. 63 Issue 7, p888
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Examines the use of two-dimensional species-resolved, holographic interferometry to measure absolute-line-density profiles of KrF laser ablation plumes in vacuum and gas. Generation of the plumes by laser focusing on a solid aluminum target; Composition of the interferograms; Peak aluminum neutral line densities measured for the plumes.
ACCESSION #
4258226

 

Related Articles

  • Holographic interferometry for the structural diagnostics of UV laser ablation of polymer substrates. Bonarou, A.; Antonucci, L.; Tornari, V.; Georgiou, S.; Fotakis, C. // Applied Physics A: Materials Science & Processing;2001, Vol. 73 Issue 5, p647 

    Holographic interferometry is examined for its potential as a diagnostic tool of the structural modifications effected in laser-processing applications. The interferometric �comparison� of the holographic images of the sample recorded before and after irradiation enables the full-field...

  • Residual Stress Measurement with Laser-Optical and Mechanical Methods. Martínez-García, Venancio; Wenzelburger, Martin; Killinger, Andreas; Pedrini, Giancarlo; Gadow, Rainer; Osten, Wolfgang // Advanced Materials Research;2014, Vol. 996, p256 

    A new approach in hole-drilling residual stress analysis is described, applying a laser for quasi non-destructive material removal by laser ablation and measuring simultaneously the residual deformation around the hole by means of high-resolution, digital holographic interferometry. To evaluate...

  • Vibroactive Pad for Replication of Microstructure and Its Experimental Analysis. Šakalys, R.; Janušas, G.; Palevicius, A. // Mechanika;2014 Conference Issue, p225 

    No abstract available.

  • Laser ablation of aluminum at 193, 248, and 351 nm. Hongxin Wang; Salzberg, A.P.; Weiner, Brad R. // Applied Physics Letters;8/19/1991, Vol. 59 Issue 8, p935 

    Investigates the pulsed laser ablation of an aluminum target at 193, 248 and 351 nanometer by fluorescence spectroscopy. Measurement of the ablated atom velocity distributions; Dependence of the velocity distributions on the vaporization laser fluence; Mechanism behind the production of...

  • Laser ablation deposition of metal oxides/nitrides films at room temperature. Misra, A.; Thareja, R.K. // Journal of Applied Physics;9/15/1999, Vol. 86 Issue 6, p3438 

    Presents a study on the role of laser ablated plume size for deposition of aluminum films in oxygen and nitrogen ambient temperature. Laser parameters and target-substrate distance for the growth and characterization of metal nitride films; Experimental procedure; Results and discussion;...

  • Plastic bag method for active sample loading into transmission electron microscope. Yao, Hao; Isobe, Shigehito; Wang, Yongming; Hashimoto, Naoyuki; Ohnuki, Somei // Journal of Electron Microscopy;Dec2011, Vol. 60 Issue 6, p375 

    A plastic bag method was developed to observe air-sensitive samples on microstructure and phase distribution without exposure to air during the holder transfer process into the transmission electron microscope (TEM). As an example, a type of lithium aluminum hydride (Li3AlH6) was observed in the...

  • Organic electroluminescence cells based on thin films deposited by ultraviolet laser ablation. Matsumoto, N.; Shima, H. // Applied Physics Letters;10/27/1997, Vol. 71 Issue 17, p2469 

    Fabricates organic thin films of copper-phthalocyanine and aluminum tris-8-hydroxyquinoline using KrF laser ablation. Crystallinity of the reconstructed films; Electroluminescence of the materials obtained at 12 volts initiation voltage; Difference of between films fabricated by laser ablation...

  • Emission of prompt electrons during excimer laser ablation of aluminum targets. Amoruso, S.; Armenante, M.; Bruzzese, R.; Spinelli, N.; Velotta, R.; Wang, X. // Applied Physics Letters;7/5/1999, Vol. 75 Issue 1, p7 

    We report on prompt emission of fast electrons occurring during xenon-fluoride (351 nm) laser ablation of aluminum targets in the nanosecond regime. We have measured both the kinetic energy distribution and the energy-integrated time-of-flight distribution of these electrons. Experimental data...

  • Ultra high repetition rate (133 MHz) laser ablation of aluminum with 1.2-ps pulses. Lapczyna, M.; Chen, K.P.; Herman, P.R.; Tan, H.W.; Marjoribanks, R.S. // Applied Physics A: Materials Science & Processing;1999, Vol. 69 Issue 7, pS883 

    Abstract. This study reports on the multi-pulse ablation of aluminum toils by bursts of mode-locked pulses from a feedback-controlled Nd:glass laser (1054nm). The 2-micro s train consists of about 250 pulses of 1.2 ps duration and 7.5 ns pulse-to-pulse separation. The bursts provide a new mode...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics